aceinyerface Posted July 31, 2015 Share Posted July 31, 2015 Looks like a Witness P Carry has the Cone shaped polygonal barrel like a Stock 2, if all the factory custom parts fit that thing, and that is a big if... 29oz plus an optic, I wonder if that would work? Thoughts? Link to comment Share on other sites More sharing options...
haiedras Posted July 31, 2015 Share Posted July 31, 2015 Don't see a way around a carry optics tanfo short of machining the slide, since I don't see tanfoglio making an out of the box optics ready pistol like the M&P and the glocks. Link to comment Share on other sites More sharing options...
ATLDave Posted July 31, 2015 Share Posted July 31, 2015 (edited) Given that USPSA's current leadership has all but announced that the CO rules are intended to give Glocks & M&Ps a home by excluding Tanfo's and CZ's, I'm greatly amused by the idea of trolling them with a Witness polymer. I think the CZ P-09 is going to show up in CO quite a bit, too, if it sticks around long enough for people to buy guns for it. Edited July 31, 2015 by ATLDave Link to comment Share on other sites More sharing options...
aceinyerface Posted July 31, 2015 Author Share Posted July 31, 2015 https://www.trijicon.com/na_en/products/product3.php?pid=AC32058 Trijicon RMR has some dovetail rigs. Link to comment Share on other sites More sharing options...
BritinUSA Posted July 31, 2015 Share Posted July 31, 2015 The slide depth looks very similar to their Open guns, I once mounted a Docter sight on my Open Tanfoglio, with milling you can get it nice and low too. A Witness set up like that would be an awesome gun for Carry Optics. Link to comment Share on other sites More sharing options...
BritinUSA Posted July 31, 2015 Share Posted July 31, 2015 Here's a picture showing how deep the cut can go on a Tanfoglio. Link to comment Share on other sites More sharing options...
haiedras Posted July 31, 2015 Share Posted July 31, 2015 Hmm is there enough room for an rmr and a suppressor height rear sight? Or just an optic? Link to comment Share on other sites More sharing options...
haiedras Posted July 31, 2015 Share Posted July 31, 2015 https://www.trijicon.com/na_en/products/product3.php?pid=AC32058 Trijicon RMR has some dovetail rigs. Interesting, still gets the optic pretty high relative to a machined slide. Link to comment Share on other sites More sharing options...
blind bat Posted July 31, 2015 Share Posted July 31, 2015 I've never wanted a plastic CZ or PO/CO type gun until I heard the rumors about Glock getting upset because the G34 is no longer the cool kid. Now I want one just to spite Glock. Link to comment Share on other sites More sharing options...
kneelingatlas Posted July 31, 2015 Share Posted July 31, 2015 I've got a friend talking me into putting a slide ride optic on a pre B 75, should come in right under the wire... Link to comment Share on other sites More sharing options...
BritinUSA Posted July 31, 2015 Share Posted July 31, 2015 Hmm is there enough room for an rmr and a suppressor height rear sight? Or just an optic? Depends on the length of the scope and the size of the rear sight, it may be possible. Link to comment Share on other sites More sharing options...
haiedras Posted July 31, 2015 Share Posted July 31, 2015 Figure an rmr06, rear sights should be about the size of the standard cz notch sights. Link to comment Share on other sites More sharing options...
MrPostman Posted August 2, 2015 Share Posted August 2, 2015 Here's a picture showing how deep the cut can go on a Tanfoglio. IMG_7415 copy.jpg Good to know. I have a mill and I could do these no problem. Link to comment Share on other sites More sharing options...
jmbaccolyte Posted August 2, 2015 Share Posted August 2, 2015 I've got a friend talking me into putting a slide ride optic on a pre B 75, should come in right under the wire... Atlas- how do you think of all this neat stuff? Don't you sleep at night or what? Link to comment Share on other sites More sharing options...
aceinyerface Posted August 7, 2015 Author Share Posted August 7, 2015 I got a quote on getting the Tanfo slide milled, $120 milled and blued or $145 milled and Ceracoated. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 7, 2015 Share Posted August 7, 2015 I've got a friend talking me into putting a slide ride optic on a pre B 75, should come in right under the wire...Atlas- how do you think of all this neat stuff? Don't you sleep at night or what? My wife says my mind is like a six burner stove with at least one gun pot simmering at all times Link to comment Share on other sites More sharing options...
vixty Posted August 8, 2015 Share Posted August 8, 2015 Haha. Atlas I think I'm going to get an 85c and have it milled. I'm thinking a cz without a fpb can be milled deeper than one with it. Plastic scate board grips should keep it underweight Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 8, 2015 Share Posted August 8, 2015 That should be great! Link to comment Share on other sites More sharing options...
KSwift Posted August 10, 2015 Share Posted August 10, 2015 $250 for the Witness P, $150 for a decent red dot, $120 for the cut? Sounds like a sweet package deal someone should start marketing. $550 turn key Carry Optics pistols... Link to comment Share on other sites More sharing options...
johnbu Posted August 10, 2015 Share Posted August 10, 2015 $250 for the Witness P, $150 for a decent red dot, $120 for the cut? Sounds like a sweet package deal someone should start marketing. $550 turn key Carry Optics pistols... Who stops there? Hammer, sear, disco, springs, firing pin... Hmmmm still pretty cheap.... hmmmmm Link to comment Share on other sites More sharing options...
Nealio Posted August 10, 2015 Share Posted August 10, 2015 Guys, just remember there is the Witness P (large frame) and Witness PS (small frame). The PS is usually just under $200 and the P for some reason is significantly more. Link to comment Share on other sites More sharing options...
Nealio Posted August 10, 2015 Share Posted August 10, 2015 Looks like a Witness P Carry has the Cone shaped polygonal barrel like a Stock 2, if all the factory custom parts fit that thing, and that is a big if... 29oz plus an optic, I wonder if that would work? Thoughts? Also be sure you are getting a true P-Carry. Most of the listings I've seen on Gunbroker for a "P-Carry" have straight barrels and a wonderfinish slides... Just FYI Link to comment Share on other sites More sharing options...
racingjoe27 Posted August 11, 2015 Share Posted August 11, 2015 Guys, just remember there is the Witness P (large frame) and Witness PS (small frame). The PS is usually just under $200 and the P for some reason is significantly more. Slick is only showing them for 269, where can you find them for under two? Link to comment Share on other sites More sharing options...
Nealio Posted August 11, 2015 Share Posted August 11, 2015 Slick is only showing them for 269, where can you find them for under two? Crap I meant under $300 (in the $200 range) and I typed the wrong thing. Sorry Link to comment Share on other sites More sharing options...
racingjoe27 Posted August 11, 2015 Share Posted August 11, 2015 You got my hopes up! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now