HeavyD7042 Posted October 10, 2015 Share Posted October 10, 2015 My Stock II and III Xtreme. Link to comment Share on other sites More sharing options...
SpaceFlunky Posted November 16, 2015 Share Posted November 16, 2015 (edited) New to me. Lim Pro in 40. I need to get the smaller safeties on it instead of those huge ones Edited November 16, 2015 by SpaceFlunky Link to comment Share on other sites More sharing options...
accu9 Posted November 24, 2015 Share Posted November 24, 2015 Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 ok a couple pics of my trust open V12. Now bear in mind it's a comp gun and gets shot every week. So it's not as purdy as some others and pics were taken after being shot. it is a tanfoglio Eric Custom V12 with the following bits: Henning medium flat trigger Henning trigger return spring tuning pack Henning solid trigger pin Henning slide stop pin (not in pic, was using regular slide stop that day) Henning plunger spring tuning pack Henning conefit guide rod (also use a sprinco from time to time) Henning 10.75lb recoil spring Wolf 14lb hammer spring Henning/EGW race hammer Henning/EGW hard sear Henning hammer and sear pin kit Henning magwell Henning mag bases Henning gen3 extended firing pin EGD xtreme light firing pin spring Polished trigger bar etc DAA 90 degree cmore mount with 8 MOA click switch grey cmore DAA thumbrest SSI scales grips in black Henning torx grip screws Not pictured (just swapping over atm): sidewinder XL slide racker (still filing the bastard) cheely 90 setback mount IPSC alex thumbrest Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 (edited) with his little CZ buddy: The CZ is a shadow orange/2012 with some mods too. CZ 85C old style trigger CZ race hammer CZ 11lb hammer spring CZ 10lb recoil spring CZ pre-b short reset disconector CZ steel guide rod henning grip screws CZ 1mm fibre front sight CZ extended firing pin CZ Rami firing pin spring CZ light trigger spring Some minor de-burring. I shoot IPSC rules with that CZ so it has to have an IPSC legal mod list. Edited November 26, 2015 by BeerBaron Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 The tanfo on his own: Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 (edited) here she is with the old henning curve grips with skate tape. they were my fav up till the time I got the SSI scales. Edited November 26, 2015 by BeerBaron Link to comment Share on other sites More sharing options...
Rhawk6 Posted November 26, 2015 Share Posted November 26, 2015 Awsome pair !!! Link to comment Share on other sites More sharing options...
rancher5 Posted November 26, 2015 Share Posted November 26, 2015 The tanfo on his own: Sure like those grips, thats a winnerSent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 yeah the grips are cool. especially with the shiny K mags inside them. the best part is the suit medium to large hands much better than any other grips currently offered for the tanfogs. Link to comment Share on other sites More sharing options...
matts2k Posted November 26, 2015 Share Posted November 26, 2015 Where did you get the grips? Link to comment Share on other sites More sharing options...
eboadway Posted November 26, 2015 Share Posted November 26, 2015 (edited) Edited Edited November 26, 2015 by eboadway Link to comment Share on other sites More sharing options...
Open1215 Posted November 26, 2015 Share Posted November 26, 2015 New to me. Lim Pro in 40. I need to get the smaller safeties on it instead of those huge ones I'll trade you the safeties off my Stock II. Ed Any trade offers must take place in classified section. Please edit so we can keep this one here. Thank you Link to comment Share on other sites More sharing options...
BeerBaron Posted November 26, 2015 Share Posted November 26, 2015 Where did you get the grips? http://www.shootingsportsinnovations.com/SHORT-TANFO-SCALES-BLACK-STFBLK001.htm Link to comment Share on other sites More sharing options...
bayougump Posted November 27, 2015 Share Posted November 27, 2015 I love the scale grips, they really are the perfect width in my opinion Link to comment Share on other sites More sharing options...
Open1215 Posted November 27, 2015 Share Posted November 27, 2015 https://youtu.be/yauPNV9Y_CQ Lim pro. Canyon creek comp. 2x 3/16in holes at 90* Link to comment Share on other sites More sharing options...
scottrallye Posted December 3, 2015 Share Posted December 3, 2015 ok a couple pics of my trust open V12. Now bear in mind it's a comp gun and gets shot every week. So it's not as purdy as some others and pics were taken after being shot. it is a tanfoglio Eric Custom V12 with the following bits: Henning medium flat trigger Henning trigger return spring tuning pack Henning solid trigger pin Henning slide stop pin (not in pic, was using regular slide stop that day) Henning plunger spring tuning pack Henning conefit guide rod (also use a sprinco from time to time) Henning 10.75lb recoil spring Wolf 14lb hammer spring Henning/EGW race hammer Henning/EGW hard sear Henning hammer and sear pin kit Henning magwell Henning mag bases Henning gen3 extended firing pin EGD xtreme light firing pin spring Polished trigger bar etc DAA 90 degree cmore mount with 8 MOA click switch grey cmore DAA thumbrest SSI scales grips in black Henning torx grip screws Not pictured (just swapping over atm): sidewinder XL slide racker (still filing the bastard) cheely 90 setback mount IPSC alex thumbrest Maybe I missed it, but is this in 9mm? I'm really considering one of these but kneelingatlas is saying that it takes a LOT to make power factor because the v12 ports bleed off so much gas. I'd love to go this route but I'm hesitant if I'm going to struggle with working up a load that works well. I forgot to ask on the thread where kneelingatlas said that, but would running a lighter recoil spring help? I kind of assume he would have sorted that angle out, but what's your experience been? Link to comment Share on other sites More sharing options...
scottrallye Posted December 3, 2015 Share Posted December 3, 2015 Well I thought I'd updated the family portrait since it got a little bigger today. ImageUploadedByTapatalk1419293047.018633.jpg ImageUploadedByTapatalk1419293063.856839.jpg Is your Gold Custom in 9mm? Link to comment Share on other sites More sharing options...
BeerBaron Posted December 3, 2015 Share Posted December 3, 2015 Sorry mines 38 super. I tend to agree the v12 Eric is probably one open gun that's worth getting in super. The flexibility in loads is nice. Mine runs best with 3n38 or n105 and I wouldn't be able to use those in a 9mm. Link to comment Share on other sites More sharing options...
Garmil Posted December 3, 2015 Share Posted December 3, 2015 Sorry mines 38 super. I tend to agree the v12 Eric is probably one open gun that's worth getting in super. The flexibility in loads is nice. Mine runs best with 3n38 or n105 and I wouldn't be able to use those in a 9mm. Loaded any .38 with no holes? Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 3, 2015 Share Posted December 3, 2015 It would take a whole case full under a 124, but I think you could sqeek out a major load with 3n38 in a 9mm V12. Maybe 9.5-10gn Link to comment Share on other sites More sharing options...
rancher5 Posted December 3, 2015 Share Posted December 3, 2015 Like KneelingAtlas idea of modifying the "factory" barrel" which has 1cut comp but room for second cut and popple holes drilled bigger not as many. Is that about right kneelingatlas. Anyway I'm a new owner of a 9mm ,find I use stock barrel more,still building up on V12 load recipe,interesting is V12 will shoot my low mild loads accurately, like to pick up another stock barrel , Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
bayougump Posted December 3, 2015 Share Posted December 3, 2015 Well I thought I'd updated the family portrait since it got a little bigger today. ImageUploadedByTapatalk1419293047.018633.jpg ImageUploadedByTapatalk1419293063.856839.jpg Is your Gold Custom in 9mm? Nope, .38 super Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 3, 2015 Share Posted December 3, 2015 That's right Rancher, although finding another 9mm "factory ammo" barrel might be difficult (I looked for years aand the closest I got was Gump's 38 barrel), but fortunately with the 4.5" V12 slide you can use the 4.75" barrel from a Match or Limited Pro combined with the V8 factory 3 port comp with the first port opened up to meet the crown of the barrel. That setup plus two holes straight up and angled slightly back would be awesome! Link to comment Share on other sites More sharing options...
rancher5 Posted December 3, 2015 Share Posted December 3, 2015 Setup sounds sweet, I will today call EAA see if they sell replacement barrels yes I also have a match elite witness in 9mm, tho it shoots so great I'd be hard pressed to Part it. As usual kneelingatlas Thanks,your the Tanfo, CZ think out of the box Guru Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now