Jump to content
Brian Enos's Forums... Maku mozo!

Leadpilot

Classified
 View Profile  See their activity

  • Posts

    178

  • Joined

  • Last visited

 Content Type 

Everything posted by Leadpilot

  1. Leadpilot
    It's really full! I've been riding the index hole with my thumb to help soften the snap. It took some time to get the feel for it but it's not too bad.
  2. Leadpilot
    I used this this data for the first time the other day and I have to agree. I shot five different powders, all making 170ish Pf, and the 3n38 was definitely the one. You just have to be a tad bit more patient and gentle while loading.
  3. Leadpilot
    I emailed Dillon a video of my sdb ram wobbling and they sent me a rebuild kit with new bearings and bushings for the whole machine. Good as new.
  4. Leadpilot
    I used an inline fab ergo handle and ultra mount with my case fed 550 with no issues.
  5. Leadpilot
    Interesting. My 130 avg PF for all three were; 3.1(PV), 3.3(N320), 3.7(BA9.5). 1.140 oal H&S 147gr SP01
  6. Leadpilot
    I'm doing the same thing. I'll probably drill out a hole or make a hollow bolt just in case. I'm digging how deep/consistent the primers are seating now.
  7. Leadpilot
    Nicely done! I prefer the long slide as well.
  8. Leadpilot
    Yes
  9. Leadpilot
    I didn't weigh it before the cut but now it's 13.3oz
  10. Leadpilot
  11. Leadpilot
    Here's mine. I took a couple thou off the inside of the dust cover just below the frame rail and the radius. I also had to reprofile the "peanut" on the barrel to match my shadow barrel.
  12. Leadpilot
    Acme 124 on the left H&S 125 on the right
  13. Leadpilot
    Acme 124 on the left H&S 125 on the right
  14. Leadpilot
    I really like these bullets. I can't give you any plunk and spin data because my CZ barrels are reamed, but his 125/147 profiles are different than the other brands. The accuracy, prices, and shipping times have been excellent.
  15. Leadpilot
    Those marks are from the bullet bouncing back up and smacking the brass in the kinetic hammer.
  16. Leadpilot

    floating trigger pin

    Leadpilot replied to wingnut's topic in CZ

    Yep. It's a slave pin
  17. Leadpilot
    I'd give CZCustom a call and see what company they use.
  18. Leadpilot
    I've been waiting for few more reviews on this. Let us know how it works out for you.
  19. Leadpilot
    A lot of guys here in Cali swap out their blocked slides for shadow slides and usually sell them for $250/$350. The few frames I've seen have been in the neighborhood of $500.
  20. Leadpilot
    Yes. He did my tacsport barrel at the same time as my shadow barrel. I did the 10X bushings in both at the same time and couldn't be happier. I'm sending him my wife's G34 barrel so she can shoot my Ammo.
  21. Leadpilot
    Yep. I wish I would have done it years ago.
  22. Leadpilot
    H&S 147gr. I've used all of the above but these really stand out for me.
  23. Leadpilot
  24. Leadpilot
    Kneelingatlas. He's an asset to this forum and the gun community.
  25. Leadpilot
    Are you talking about the two screws that attach underneath the shell plate platform? If you are, you reuse the existing screws on the press.
×
×
  • Create New...