Jump to content
Brian Enos's Forums... Maku mozo!

Leadpilot

Classified
 View Profile  See their activity

  • Posts

    178

  • Joined

  • Last visited

 Content Type 

Everything posted by Leadpilot

  1. Leadpilot
    Here's my card. It's the best gun I own now:)
  2. Leadpilot
    Awesome! My two year old picks up my mags for me....then runs away with them.
  3. Leadpilot
    Titegroup at Cabelas with free shipping...as of 2pm pacific.
  4. Leadpilot
    +1 http://www.czfirearms.us/index.php?topic=61135.15
  5. Leadpilot
    Looks great! Do you do a rinse cycle on your brass or dump the dirty water and let dry? Also, what kind of water...tap, filtered, distilled?
  6. Leadpilot

    BUllet OAL

    Leadpilot replied to chetc's topic in 9mm/38 Caliber

    I've never measured this load
  7. Leadpilot

    BUllet OAL

    Leadpilot replied to chetc's topic in 9mm/38 Caliber

    I start to see pressure signs(flat primers)at 3.1 of titegroup with 147fp at 1.10. 2.9gr is comfortable and a nice load thru my cz. I wouldn't seat that bullet any deeper personally.
  8. Leadpilot
    Have you ever pencil tested your gun? I've noticed that the SP-01, even with an extended firing pin, will barely budge the pencil no matter if its a 8.5# or 13#. With both of my SP-01 shadows the pencil launches out of the gun with ease with the 8.5#.
  9. Leadpilot
    I'm looking for a couple fixed comp sights too.
  10. Leadpilot
    I had a shadow do that after changing out the disco. I ended up having to mod one of the disco angles and now everything works great. David will send you an email with the instructions if you give him a call.
  11. Leadpilot
    I use the 3M safety walk tape on mine. I have to replace it every couple of months but you get 15ft of it for about $8.
  12. Leadpilot

    CZ hammer

    Leadpilot replied to chetc's topic in CZ

    If you plan on taking the gun apart a few times I'd get the CGW floating trigger pin, firing pin retaining pin, and a couple of their hammer pins. I was going to machine a spacer as well but for $1.50 it's not worth the hassle.
  13. Leadpilot
    Do you use the CZC or CGW extended firing pin? The CGW pin is longer so that might help.
  14. Leadpilot
    I've never had a ftf with the 8.5# and I don't use federals. I think a lot of it has to do with my hand priming and "crushing" the primers making sure they're deep.
  15. Leadpilot
    Both of mine are that way too.
  16. Leadpilot
    Yes. Mono cast or lost wax casting.
  17. Leadpilot
    Haha! I have the same setup/issues. I hope someone has the fix for this.
  18. Leadpilot
    I use the Redding Comp seating die for 9mm with a Mr. Bulletfeeder on my 650. I load most Blue Bullets. No marks on the tips, length stays dead on. Yep! Im now using both and they have reduced a ton of frustration.
  19. Leadpilot

    Grip Preference

    Leadpilot replied to Malarkey's topic in CZ

    I've had the thin aluminum and the VZ's but went back to the stock rubber grips.
  20. Leadpilot
    I just converted mine. Are the slides worth anything?
  21. Leadpilot
    Yeah, I tried that twelve pack of beer method.... I managed to turn a five gallon bucket of "mixed" brass into five one-gallon buckets of "mixed" brass Sent from my iPhone using Tapatalk Haha:)
  22. Leadpilot
    Not at all. All I'm moving is the feeder bowl from the 550 post to the 650 post.
  23. Leadpilot
    Here is my 650 with the 550 case feeder. Works great!
  24. Leadpilot
    If you cut 4" off of the 650's down tube it will work.
  25. Leadpilot
    Different. The micro switch assembly is halfway down the drop tube. It's also a single speed bowl.
×
×
  • Create New...