dansedgli

Sorry I missed this. Both bushings fit in, the slidestop side is easier to push in than the other but even with the bushings and screws in there is a slight gap. Thanks for that Assaulter, I will have a look at that tonight. I did not think to check that tab's depth.

It isn't touching where it is circled and but it is very close. A .003 feeler gauge doesn't fit between the frame and grip at the middle circle. I had to cut down the trigger guard to fit into the recess. There is clearance all around it now and it won't seat any deeper. I feel like if I could get that .002 closed up my front grip screw would line up but at this point, I'd be filing randomly and hoping for the best.

I've spent the last few nights trying to get my cheely grip on being very careful not to over do it. I'm a hair away from it being right and I still cant get the front grip screw in. It goes in 1 side but on an angle so doesnt come out the other side. Any tips on where else could need filing or how to check? Ive used marking blue everywhere and tried to use playdoh to find any high spots but I cant find any. When do you give up and ream out the front grip screw hole? I can see light at the circled areas when I have just the right angle, I can only get a .002 feeler gauge in there.

49.7oz for my STI tactical with a cheely grip, tungsten guide rod and nitro fin.

That is lovely.

This thread would be better if there were details. Mine is 40oz. A custom edge with slide cuts, tungsten guide rod, stainless magwell and a nitro fin. My other is an STI Tactical 5.0. It's the same weight with the same parts. Slightly lighter frame and slightly heavier slide cancel each other out. Going to test out a cheely aggressive soon.

Old pre upgrade guns reset differently. This thread is that old. They needed more overtravel.

I zero at 25 yards and aim at the centre for everything.

Max Michel has been hinting at a new gun called the p320Max. I bet that gets cut for the romeo 3.

Looks like they updated the chamber. Not that there was anything wrong with it.

Both were Springer guide rods.

Yeah thats a 5 inch gun. Calling it a Stacatto P 5 inch or something according to instagram. The tactical appears to be discontinued too.

Do you think its better than the ssi grip option?

Tungsten and steel. Yes Open Div. I know.

Mine still hits the optic with an 11lb spring. ..

The improvement in trigger pull comes from a difference in the striker safety spring. Swap the striker over only and test the trigger. The striker safety spring is probably just more worn in.

Oh, that wouldn't have helped.

Why didnt you shoot your CZ?

I was referring to the DVC.

Then it will crack.

You should see the tungsten under it.

Much different to the gray guns trigger?

There are better options for all divisions if we are being honest.

Did it myself. Jb weld and the coarsest silicon carbide sandblasting media I could find.