inrut

The Swithblock isn't designed to be under a handguard. You would have to call noveske and buy a shorter NSR without the barrel nut, which will save you like $50. You cant go wrong with the LWRC though.

+1 Zeiss PRF

The only problem I have had is the screws seem to always need adjusted for tension.

The first one is the correct one, by the m2 parts guide.

The key to the factory m&p is to change when the paint flakes off. As for aftermarket springs just change them once a year with mag springs and your good.

I changed all my m&p 9mm to a 13lb spring. I slow motion video spring tuning and the 13lb had the least muzzle dip.

You use the mounting screws that come with the rmr.

Can't go wrong with techwear. Animal is good also, but quality is so so.

I normally use lm, but have the full briley set. I find myself running the IC more this year though. I have ran slugs up to a IM.

Install the whole kit. I have several m2's with the kit and a full TTI m2. It is a huge improvement. Your m2 will run anything you put in it.

I may be wrong, but just my 2 cents. I had a similar problem with the same thing and a seekins lower. I was overthinking the problem. The video shows a gen 3 pmag 40 if you watch it wobble in the video that was my problem. The over insertion tab at the back of the magazine was causing the magazine to not seat properly. I had no problems with gen 2 pmag's. I filed off the over insertion tabs and have not had any problems since. Good Luck

I have a Zev 35 and a Zev 24 both with KKM conversion barrels. The factory .40 ejection is unpredictable with the 9mm. For a couple more dollars you can change the extractor and extractor bearing to the 9mm ones. The shells fly to the right that way. It only takes a minute to change the parts. It also has a benefit as to add non reciprocating weight to the front of the gun to help with muzzle rise. In my opinion the KKM barrel is the only way to go accuracy wise they group tighter.

Taran Tactical Innovations !!!!!!!!!!!!!!!!!!!!!!

Rather than send them a donor gun, have a full build done its cheaper because the only thing of yours that gets used is the frame. Their frames are only $165, at least that way you are not sitting on half a gun. I have a zev 17, 35, and 24, call and talk to them and have them build what you want. A 35 or 24 with a 9mm conversion barrel, which is basically a 9mm bull barrel has some weight forward on the muzzle that controls the flip or rise to keep the sights flat . Just my .02 but don't let them chop your gun, just buy another.

I have a plus 1 and a plus 2 from Shooters Source and love them!

"Reduced Reliability" Now that's funny right there. I think everybody knows better!

I had to bend the front edge of the lifter to get a nice flow of the shells going in. If you look at your lifter and push it down the shells are coming in at a sharp angle and are bottoming out in the tube. Just bend the front edge of your lifter so that they don't bottom out in the tube.

How about the VX-6 Multigun with the SPR reticle. I have the fire dot duplex and you would be better off with the SPR.

Got it booked thank you for the info!!!!

Called everywhere ended up booking in sedalia MO

Is anyone else having trouble getting motel rooms?

In an E-mail from Amy they are doing registration from 8am to 5pm and 7pm to 9pm on Thursday....

After all the researching I could do I bought the safariland 3-gun case and have been very happy with it... You can't go wrong with safariland!!!!

Put QD attachments on your shotgun and rifle and use the Magpul MS4 it consolidates gear to need one sling that is capable with both guns...

Is there any squadding information available yet?