kneelingatlas
-
Posts
8,154 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by kneelingatlas
-
The conversion barrel is a larger diameter than the G34 barrel, adding more weight to the front end.
-
CZ USA had a few comps in stock.
-
Ready for the range tomorrow!
-
I'd like to believe guys who would sell a lemon without full disclosure are in the minority on this forum. I know I'm more concerned about the reliability of the guns I sell than the guns I shoot!
-
VV 3N38 and 320 in stock at Powder Valley right now
kneelingatlas replied to shtr3's topic in General Reloading
3n38 gone! -
That's really long! How does it shoot? I would just load at 1.165" and call it good as It groups well.
-
Do you mean 1.1315"?
-
That's a pretty high low ready
-
Softer to shoot yes, but faster split times I dunno... have you tried it on the clock?
-
I haven't done a decocker yet, so I don't have any words of wisdom there
-
Very cool, 5# DA with a FPB in place is a good trigger job
-
Shadow or SP-01?
-
Thank you David that means a lot coming from you, I really like using your products.
-
Oh, you said Double Action!?! Clearly I misread, I thought you said you were having a hard time getting the SA under 3#. A DA under 5# feels too mushy to me so I haven't even tried going lower than that. How does it feel at three?
-
When you hammer on the pin the end flares out a little, so if you sharpen the pin almost to a point it will go back in more easily; imagine a truncated cone bullet, shape it like that.
-
Yes, try beveling the edges of the trigger pin, if it's mushroomed it will be difficult to get back in.
-
Really? Which hammer are you using? I've gotten under 2# with the comp hammer and 11.5# spring.
-
I have a .45 Hunter, but I sold the top end and now I use a .40 Limited top end:
-
The 10mm Hunter of course
-
I had a 97B once and found it very tall, I preferred my Witness .45 at the time, but I ended up selling them both Once I got heavily invested in USPSA I got out of .45 altogether, now I just have nines, .22s and a few 40s.
-
I know what a slide stop is, I just don't use them... but I shoot USPSA
-
What's a slide release?
-
Why Small Rifle Primers may be worse 9mm major
kneelingatlas replied to MoonJeong's topic in 9mm/38 Caliber
I just loaded 100 9 Major loads using Federal SPP (the thinnest cups around) and I could not see a difference between those fired rounds and my normal CCI SRP loads so since I have ~40K of the feds it looks like I'll be using them for everything. -
Best 9mm minor load for the STI Steelmaster.
kneelingatlas replied to SteelMaster's topic in Open Pistols
I chrono'd the load I mentioned above on Sat: a 115gr plated bullet at 1.150" over 3.2gr of Clays made just 112 out of a 4.75" barrel and with an 8# recoil spring it ran like a sewing machine all night -
.40S&W 165gr vs 180gr when both have same Power Factor
kneelingatlas replied to WickedBag's topic in Miscellaneous BEginners
Perhaps, but I don't geek out over reloading because its going to make me win
