missed it by that much

Sorry don't shoot those. Wish I could help Sent from my SAMSUNG-SM-G900A using Tapatalk

I have the LLV on a mark iii 22/45 and a tactical solution barrel on a mark 2. Both barrels are accurate. Can't go wrong with either Sent from my SAMSUNG-SM-G900A using Tapatalk

Now that's a chamfer! Sent from my SAMSUNG-SM-G900A using Tapatalk

+1 on the allchin mount with the vortex 6 moa same foot print as the ff3 just has the 6moa dot vs the 3 or 8. Sent from my SAMSUNG-SM-G900A using Tapatalk

If you don't mind what's your load for the 145 grain bullets. And what bullets? Please and thank thanks Sent from my SAMSUNG-SM-G900A using Tapatalk

Well guess I'll chime in since I'm a disabled shooter from a wheelchair. Paralyzed from a car accident, and a vet but disability from the service is hearing. I've shot the bianchi three times from a wheelchair. Met Trevor the first year I shot which was also the first year he shot. I started shooting bowling pins, graduated to action pistol, have shot steel, just shot my first gssf shoot. Have also shot ppc and bullseye all from the chair. I buy my own equipment reload my own ammo and work full time to do so. Different disciplines have different ways of handling disabilities. NRA you have to apply and send pics of your chair and holster set up as well as your disability. You then get a approval for matches to shoot from the chair. In ppc if you can't get in the position such as prone you shoot it weak hand. I'd like to try uspsa but would have to break rules. I was shooting an informal paper and steel match and was shooting my revolver and a guy running an I CORE match invited me to shoot it I stated I couldn't "run" and gun so to speak. He offered to just add the time of the slowest able bodied persons movement from one to the next array of targets. I declined as I thought it to be unfair. In all this babbling I'm saying formal rules and qualifications for disability might be good even though only for a small population. I went to this section to actually look up equipment rules as I'm considering going to a local practice uspsa match on Monday after work. Since it's practice figured rules would be more lax. Just chiming in since I saw this. I've personally met some great people shooting and it's one of the few sports where your competitors will give you advise lend equipment etc. Sent from my SAMSUNG-SM-G900A using Tapatalk

Are those 355 or 356 zeros? Sent from my SAMSUNG-SM-G900A using Tapatalk

+1 on that 105 grain bayou bullet behind 3.5 grains Titegroup accurate and powder puff load. Both my 929 and springfield 5.25 shoot well with that load Sent from my SAMSUNG-SM-G900A using Tapatalk

124 grain acme Titegroup 4.0 grains OAL 1.125 8 shots 17 yds 2.139 inches ctc 1 flier 160 BLACK & blue coated bullet VV320 3.0 grains OAL 1.160 8 shots 1.339 inches 25 yds ctc 8 shots 3.318 inches 50 yds ctc All off my gun bag as a rest on a bench Sent from my SAMSUNG-SM-G900A using Tapatalk

I did my revolver in blue, but sold it so not sure how it held up. Sent from my SAMSUNG-SM-G900A using Tapatalk

I'm shooting winchester in my 929 Sent from my SAMSUNG-SM-G900A using Tapatalk

Yea save those fspp for us wheel gunners ! Sent from my SAMSUNG-SM-G900A using Tapatalk

Where'd you get those pretty purple bullets? Sent from my SAMSUNG-SM-G900A using Tapatalk

I have a Lee works in my 929 Sent from my SAMSUNG-SM-G900A using Tapatalk

Even then they probably think he's packing or horny. ..maybe both Sent from my SAMSUNG-SM-G900A using Tapatalk

Thanks Sent from my SAMSUNG-SM-G900A using Tapatalk

Are these large frame or small frame? Sent from my SAMSUNG-SM-G900A using Tapatalk

Not sure about 160 grain. But with coated lead 135 grain acme vv320 at 4.4 grains OAL of 1.130 136 power factor. Jacketed bullet 125 Hornady action pistol. 356 diameter 4.3 grains Titegroup OAL of 1.210 139 power factor Both loads same point of impact and very accurate out of my 38 super revolver. Hope that helps Sent from my SAMSUNG-SM-G900A using Tapatalk

I have the bmt for both my 38 super and 9mm revolver. I'm shooting 160 grain out of the 9mm and find a slight angle canted to work best for loading. My other loader was the one that looked like pliars that had a mandrel in the center that changed for specific calibet/clips. The bmt is much better. Sent from my SAMSUNG-SM-G900A using Tapatalk

+1 bmt mooner also de moons. Sent from my SAMSUNG-SM-G900A using Tapatalk

+4 auto drum solves the problem Sent from my SAMSUNG-SM-G900A using Tapatalk

And I been shopping at Lowe's to boot. Purple bullets, home Depot. ...here I come master division. Darn 8 shot.! Sent from my SAMSUNG-SM-G900A using Tapatalk

That's why I'm going old school single action black powder for uspsa, steel, etc. Sent from my SAMSUNG-SM-G900A using Tapatalk

Regular Ole 38 super should work. Not certain but on mine when I used super comp I had to adjust the extractor Sent from my SAMSUNG-SM-G900A using Tapatalk

I'd send those revolvers back to the factory. No barrel lugs. Smith and wesson is really not catching things : ) Sent from my SAMSUNG-SM-G900A using Tapatalk