Fireant Posted January 24, 2009 Share Posted January 24, 2009 What spacers do you use so they will stay in the mag pouch? Link to comment Share on other sites More sharing options...
ebg3 Posted January 24, 2009 Share Posted January 24, 2009 I had to use my STI mag spacer with a thin washer behind it to get my mags to stay put. I couldn't get any of the supplied spacers to work right. Link to comment Share on other sites More sharing options...
basman Posted January 24, 2009 Share Posted January 24, 2009 STI spacer with a 1/8 peice of neoprene cut to fit behind the spacer. Link to comment Share on other sites More sharing options...
gb32 Posted January 24, 2009 Share Posted January 24, 2009 Flat washer from an automotive fastener place. Link to comment Share on other sites More sharing options...
JimInFL Posted January 24, 2009 Share Posted January 24, 2009 Roger - I used the sti spacer and put a piece of velcro (soft side) in the pouch - works great. Just wrap it over the top edge slightly so you don't catch on it. JimInFL Link to comment Share on other sites More sharing options...
mike cyrwus Posted January 25, 2009 Share Posted January 25, 2009 Roger - I used the sti spacer and put a piece of velcro (soft side) in the pouch - works great. Just wrap it over the top edge slightly so you don't catch on it.JimInFL This is what I did, only I just put a 3/4" square loop side velcro on the spacer. Its stayed put for me. Link to comment Share on other sites More sharing options...
Fireant Posted January 25, 2009 Author Share Posted January 25, 2009 Thanks, I'll try the velcro idea. Link to comment Share on other sites More sharing options...
atek3 Posted February 16, 2009 Share Posted February 16, 2009 the CZ/Beretta spacers don't work? that's a bummer. Link to comment Share on other sites More sharing options...
Dave Gundry Posted February 16, 2009 Share Posted February 16, 2009 .100" thick washer behind the big spacer was perfect for me. Link to comment Share on other sites More sharing options...
eerw Posted February 16, 2009 Share Posted February 16, 2009 using the STI spacer and cranking them down.. Link to comment Share on other sites More sharing options...
RickyH Posted February 16, 2009 Share Posted February 16, 2009 Roger i use the glock spacer and the L shaped one. Link to comment Share on other sites More sharing options...
Jaxshooter Posted February 16, 2009 Share Posted February 16, 2009 Now he is going to shoot Production so he dosen't have to dog the classifier in Open. Very good thinking. No wonder he learns our kids stuff. Link to comment Share on other sites More sharing options...
almostold Posted February 19, 2009 Share Posted February 19, 2009 I used the CZ insert after milling them to the correct thickness. Link to comment Share on other sites More sharing options...
dr2e Posted February 23, 2009 Share Posted February 23, 2009 just back from the hardware superstore where i got some fender washers. they varied from about .061 to .077. put them behind the glock insert and the pouch holds the m&p mag just fine. a .10 washer would be perfect, as stated before, as these a just a little thin. just have to crank down on the tension screw. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now