Tom Mainus Posted February 11, 2007 Share Posted February 11, 2007 (edited) http://smith-wessonforum.com/eve/forums/a/...04/m/4061018002 Better get there quick. Tom Edited February 11, 2007 by Tom Mainus Link to comment Share on other sites More sharing options...
warpspeed Posted February 11, 2007 Share Posted February 11, 2007 nice gun - too bad not on California Approved list Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 11, 2007 Share Posted February 11, 2007 Hello; Thanks for posting that but I may be too late. Thanks Eric Link to comment Share on other sites More sharing options...
COF Posted February 12, 2007 Share Posted February 12, 2007 Didn't realize they were that rare...I've just been shooting the crap out of mine for 3 years. Too bad you missed that one, Eric. They're sweet shooters I've only had one gun that I never shot - sold it and bought a shooter. Jerry Link to comment Share on other sites More sharing options...
paulie686 Posted February 14, 2007 Share Posted February 14, 2007 (edited) The .40 S&W 646's are a HOOT! A former co-worker of mine, "mikey357" here, has two. One he bought new last year and has fired a little bit...it has a decent action, considering it is still "Out of the Box", until it gets a "Massage". The second one he purchased used from a poster over on the S&W Forum, for a little bit more than the one he bought "NIB" last year! I guess they ARE somewhat scarce, after all! Paulie686 Edited February 14, 2007 by paulie686 Link to comment Share on other sites More sharing options...
mikey357 Posted February 14, 2007 Share Posted February 14, 2007 Paul is right, I DO have TWO 646's...the "Newer" of the two--the used gun--"Set me Back" MORE than the new one I bought last year...I bought it primarily because it had an "Action Job" by Dave Clements AND it came with about three DOZEN "Moonclips"!!! I just picked it up from my friendly, local FFL holder a coupla' days ago, and have not had a chance to fire it yet...how's Saturday, at either Autrey's or Ga. Range and Gun sound, Paul???...let me know....mikey357 Link to comment Share on other sites More sharing options...
hopalong Posted February 15, 2007 Share Posted February 15, 2007 Only around 900 of the NON Performance Center 646s' produced. I have 2 myself, nice blasters and no they are not for sale. Hopalong Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 15, 2007 Share Posted February 15, 2007 Hello: No wonder I'm having a tuff time finding one, you guys all own more than one ;-). I am still looking for a 646 or the 610 4" models. I like the looks of the 646 though but like the larger size of the 610. It is just like my 1911's you can't just have one. Thanks Eric Link to comment Share on other sites More sharing options...
Carmoney Posted February 15, 2007 Share Posted February 15, 2007 I have one of these neat little guns too. The only time I've shot it in the past couple years was at our big Iowa Back-to-Back SS/Revo match last fall. The gun worked just fine, although I re-discovered that XTP bullets do not make for speedy reloads! Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 15, 2007 Share Posted February 15, 2007 I guess I'm the only guy here without a 646. Who wants to sell one???? Link to comment Share on other sites More sharing options...
mikey357 Posted February 15, 2007 Share Posted February 15, 2007 Hey, Cliff, how bad do ya' want one??? I'll trade you the NEWER and less-used one I've got for that ol', worn-out 627 you shot at the Georgia State Steel Match in January...sound like a "Deal" to you???...Let me know....mikey357 Link to comment Share on other sites More sharing options...
sargenv Posted February 15, 2007 Share Posted February 15, 2007 I don't have a 646 but I do have one of the 6.5" 610's I just picked up a 627 and until I get an action job on it, I'm probably going to stick to the 610. Vince Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 15, 2007 Share Posted February 15, 2007 Hello: I see a trend here on the favorite revolvers. The two I'm looking for the 610 and 646 are loved by all that have them. I have a friend here with a 610 he bought new and he loves it. I asked if he wanted to sell it and he looked at me like I was going to steal his dog. So I keep looking. I think I will try to find the 646 first since it will do what I want for local ICORE and paper shooting. Thanks Eric Link to comment Share on other sites More sharing options...
TMC Posted February 15, 2007 Share Posted February 15, 2007 Whats the going price on a LNIB 4" 610? I have the one I picked up at the IRC a few years back, I only shot 1 moom clip full and then put it away. Link to comment Share on other sites More sharing options...
10mmdave Posted February 16, 2007 Share Posted February 16, 2007 Whats the going price on a LNIB 4" 610? I have the one I picked up at the IRC a few years back, I only shot 1 moom clip full and then put it away. No one's answered yet so I'll give it a go. GA has a 4 inch 610 for $899 right now, GB has one for $849 I've seen 'em as low as $700 and sell on GB for as much as $900 Good luck with the sale. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 16, 2007 Share Posted February 16, 2007 Hello: I am joining you guys in the revolver class now. I bought a 646. I have to send the money off but I just could not wait any more and trying to find one is very hard. It seems those that like the 610 or 646 have to have more than one. I would think S&W would make some more with all the interest I have seen. Now what else do I need for IDPA or ICORE? It comes with a holster and some other stuff as well. Let me know and thanks for all your help. Thansk Eric Link to comment Share on other sites More sharing options...
hopalong Posted February 17, 2007 Share Posted February 17, 2007 Eric, The very first thing I would get for a 646 is some Hearthco moonclips!!!!! The clips provided by S&W are so sloppy and wobbly it is not funny. I have a few S&W factory clips that my brass actually will fall out of. You may want to try the plastic moons (TK ???) but I personally would go the Hearthco way. Then load some up and go play for now. Later you may want to go with a different rear sight, I have a millet on mine. Grips are quite personal, I use a Miculek as I also have that grip on all my USPSA Wheel guns and so nothing changes. I know some that like the pacmyer factory grip, some like to take the finger groves off but keep the pacmyer.........You see where I'm going with that. Have fun, I hope you like the little gun as much as I like mine. Hopalong Link to comment Share on other sites More sharing options...
COF Posted February 17, 2007 Share Posted February 17, 2007 Eric, Ranch makes good moonclips for the 646, as well. Personally, I'd go with the Miculek grip. The rubber grips can get in the way of the moonclip. Otherwise, just shoot and enjoy. Jerry Link to comment Share on other sites More sharing options...
Daniele Posted February 17, 2007 Share Posted February 17, 2007 Ranch moonclips , Hogue rubber grips, Fiberoptic front sight, unscrew the mainspring screw and Federal primers, bob the hammer,something around 200 grain RN, Speedsec5 holster, California FMC holder (6) : that works for me, Major Revo division IPSC. I am in love with 646! I had to buy a spare one! Link to comment Share on other sites More sharing options...
10mmdave Posted February 17, 2007 Share Posted February 17, 2007 Hello: I am joining you guys in the revolver class now. I bought a 646. I have to send the money off but I just could not wait any more and trying to find one is very hard. It seems those that like the 610 or 646 have to have more than one. I would think S&W would make some more with all the interest I have seen. Now what else do I need for IDPA or ICORE? It comes with a holster and some other stuff as well. Let me know and thanks for all your help. Thansk Eric We all do ACR, we all do Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 18, 2007 Share Posted February 18, 2007 I didn't know the 646's were hard to find, guess I never looked. Maybe I'll try to trade one of my 610's for one. Sounds like a cool gun to have in the collection. Link to comment Share on other sites More sharing options...
Flexmoney Posted February 18, 2007 Share Posted February 18, 2007 No wonder they are hard to find...ya'll keep "collecting" them. Link to comment Share on other sites More sharing options...
mikey357 Posted February 18, 2007 Share Posted February 18, 2007 Hey, Cliff, have you got a FIVE-inch 610 with the firing pin on the hammer--where God, Horace an' D.B. MEANT for it to be??? If so, "PM" or e-mail me... ....mikey357 Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 18, 2007 Share Posted February 18, 2007 Hey, Cliff, have you got a FIVE-inch 610 with the firing pin on the hammer--where God, Horace an' D.B. MEANT for it to be??? If so, "PM" or e-mail me... ....mikey357 Sorry, I have 2 6.5'' 610's and 1 4'' Link to comment Share on other sites More sharing options...
Nemo Posted February 19, 2007 Share Posted February 19, 2007 Sam Conway had a 646 for sale not too long ago. I'll ask him when I see him again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now