MuayThaiJJ Posted December 4, 2021 Share Posted December 4, 2021 Hey guys, I'd like to add weight to the TSO so it matches my 2011s. What magwell/grip combos have you found works best for adding the beef? thanks! N Link to comment Share on other sites More sharing options...
Ludde Posted December 4, 2021 Share Posted December 4, 2021 https://www.m-arms.eu/set-monarch-1-short-grips-magwell-for-cz/ These magwells comes in brass also. Link to comment Share on other sites More sharing options...
yigal Posted December 4, 2021 Share Posted December 4, 2021 tungsten guide rod and s.s. recoil spring plug will add another 100 gr. on the front. Link to comment Share on other sites More sharing options...
Shootingaggie Posted December 4, 2021 Share Posted December 4, 2021 It isn’t heavy enough? Link to comment Share on other sites More sharing options...
obsessiveshooter Posted December 4, 2021 Share Posted December 4, 2021 What is the weight difference? I'd think you'd want to match the balance more than the actual weight, if you're trying to get them to behave the same. Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted December 4, 2021 Author Share Posted December 4, 2021 My 2011s all have steel grips, the Cheely I like the best. Lots of weight at the base and not the muzzle so it feels solid. I am thinking of the brass magwell and grip combo but want to see if someone actually tried a few and found the best combo Link to comment Share on other sites More sharing options...
Amra86 Posted December 4, 2021 Share Posted December 4, 2021 (edited) Lok grips has brass grips for it. Edited December 4, 2021 by Amra86 Spelling Link to comment Share on other sites More sharing options...
regor Posted December 5, 2021 Share Posted December 5, 2021 6 hours ago, MuayThaiJJ said: My 2011s all have steel grips, the Cheely I like the best. Lots of weight at the base and not the muzzle so it feels solid. I am thinking of the brass magwell and grip combo but want to see if someone actually tried a few and found the best combo I’ve been using the Lok palm swell brass grips on my Czechmates. The short cut version for factory magwell adds about 6.5oz and balances quite well. I also recently got an Eamann Tech brass magwell to test out which adds another 3.5oz and the balance feels amazing with that, but it’s quite a lot of weight to add. Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted December 5, 2021 Author Share Posted December 5, 2021 Just now, regor said: I’ve been using the Lok palm swell brass grips on my Czechmates. The short cut version for factory magwell adds about 6.5oz and balances quite well. I also recently got an Eamann Tech brass magwell to test out which adds another 3.5oz and the balance feels amazing with that, but it’s quite a lot of weight to add. Perfect, this is exactly the combo I was considering. Link to comment Share on other sites More sharing options...
bigdave24 Posted December 5, 2021 Share Posted December 5, 2021 Please keep us posted and let us know what you think if you give it a try. Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted December 5, 2021 Author Share Posted December 5, 2021 Will do, I think this TSO will become a TSB...Tactical Sport Brass lol Link to comment Share on other sites More sharing options...
obsessiveshooter Posted December 23, 2021 Share Posted December 23, 2021 I just saw that Toni Systems makes a gorgeous magwell in brass for the TSO/czechmate. I'm really impressed with their product designs. Everything else I see is so utilitarian in design. Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted December 23, 2021 Share Posted December 23, 2021 Brass grips and brass magwell felt to heavy and slowed the gun down in transitions. never got to do any slow mo video to see if it helped muzzle flip. the difference felt negligible. but it’s worth experimenting with for sure. Link to comment Share on other sites More sharing options...
ULshooter2491 Posted December 24, 2021 Share Posted December 24, 2021 8 hours ago, obsessiveshooter said: I just saw that Toni Systems makes a gorgeous magwell in brass for the TSO/czechmate. I'm really impressed with their product designs. Everything else I see is so utilitarian in design. Be forewarned if you go with the Toni system magwells that your current basepads may have interference with the magwell before seating high enough for the slide to strip rounds from the mag. It’s absolutely massive but I had to take a good bit of metal out of the inside for my TF basepads to not hit. If you went with Toni basepads as well probably wouldn’t be a problem. Link to comment Share on other sites More sharing options...
ULshooter2491 Posted December 24, 2021 Share Posted December 24, 2021 After Link to comment Share on other sites More sharing options...
ULshooter2491 Posted December 24, 2021 Share Posted December 24, 2021 Link to comment Share on other sites More sharing options...
obsessiveshooter Posted December 24, 2021 Share Posted December 24, 2021 I wonder if the CZC pads would have fit. Those are the most common as far as I know. Link to comment Share on other sites More sharing options...
ULshooter2491 Posted December 24, 2021 Share Posted December 24, 2021 I couldn’t say for sure. All I have are TF & SP Link to comment Share on other sites More sharing options...
CC3D Posted January 30, 2022 Share Posted January 30, 2022 On 12/23/2021 at 8:20 PM, ULshooter2491 said: I couldn’t say for sure. All I have are TF & SP Did your SP base pads fit before making the modification? Link to comment Share on other sites More sharing options...
ULshooter2491 Posted January 30, 2022 Share Posted January 30, 2022 2 hours ago, CC3D said: Did your SP base pads fit before making the modification? Mine did but I only have two 170mm SP pads for when I goof off with 40 open Link to comment Share on other sites More sharing options...
CC3D Posted January 30, 2022 Share Posted January 30, 2022 I imagine that they fit then. I can't see anything but the length of the base plate changing between the 140 and 170mm versions. Link to comment Share on other sites More sharing options...
obsessiveshooter Posted January 31, 2022 Share Posted January 31, 2022 ULShooter, Did you have to trim your (I'm assuming, short version) grips to fit to the magwell? I really want that magwell, and I'm wondering if I will need the Toni grips for there to be a proper fit between the magwell and grips. Toni Systems makes the X3D grips with a palm swell, but I just don't know if they are thick enough for me. I know that Armanov spidergo thick grips would work for me, but I don't like the idea of trimming aluminum grips. It aint hard, I know, but after spending $200 on grips and magwell I want it to look nice. Also, in the pic it looks like there is a surprisingly large gap at the backstrap. Can the magwell be slid forward to close that gap? Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted February 1, 2022 Share Posted February 1, 2022 (edited) There always chrome ! patriot defense did a wicked awesome job on the slide Cuts. Joe didn’t mis a beat when I asked if he could do his new Tanfo slide cuts on a tactical sport. Edited February 1, 2022 by Superkaratemonkeyfighter Link to comment Share on other sites More sharing options...
Bostenelli Posted February 12, 2022 Share Posted February 12, 2022 (edited) Wow nice love the mag extender where did you get. Looks great Edited February 12, 2022 by Bostenelli Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted February 12, 2022 Share Posted February 12, 2022 It’s a springer 170mm extension. Works well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now