UpYoursPal Posted December 3, 2020 Share Posted December 3, 2020 Long story short: a few months ago I bent the rear sight blade on my TRR8, and have been trying to find a replacement. I've looked around the internet and for the life of me I cannot find what kind of rear sight blade the old TRR8 uses! S&W's site says that the TRR8 uses an "adjustable V-notch" site, which mine definitely does not have. I purchased mine in 2008 or so, so it's most definitely an older model, but you would think that it would be listed SOMEWHERE, right? Does anyone know? Link to comment Share on other sites More sharing options...
Toolguy Posted December 3, 2020 Share Posted December 3, 2020 I have some extra ones. If you measure the height of yours, I will send you one of the same height. Link to comment Share on other sites More sharing options...
pskys2 Posted December 4, 2020 Share Posted December 4, 2020 (edited) It's still a S&W sight blade try Midway? https://www.midwayusa.com/product/1004431882?pid=242918 or just the blade https://www.midwayusa.com/product/1004507628?pid=750428 or kit https://www.midwayusa.com/product/1004467773?pid=477723 not a V notch but I don't like them anyway. Or is this model a on of that S&W tried? But if this is it https://www.thefirearmblog.com/blog/2019/10/16/wheelgun-wednesday-sw-trr8/ it looks like a standard sight. Edited December 4, 2020 by pskys2 Link to comment Share on other sites More sharing options...
ysrracer Posted December 4, 2020 Share Posted December 4, 2020 I use this, and like it much better. https://www.jackweigand.com/smith_wesson_rear_blade.html Link to comment Share on other sites More sharing options...
alecmc Posted December 4, 2020 Share Posted December 4, 2020 a rear sight blade is a rear sight blade, no matter the model. Though, now might be a good opportunity to upgrade to something better like a bowen classic arms, or weigand if you are on more of a budget. Link to comment Share on other sites More sharing options...
PatJones Posted December 4, 2020 Share Posted December 4, 2020 (edited) 3 hours ago, ysrracer said: I use this, and like it much better. https://www.jackweigand.com/smith_wesson_rear_blade.html I used to use one of those. Great sight picture, but they bend easily. The blade bent down slightly twice. Sucks shooting a match with a gun that hits low unexpectedly. I really babied it after the first time, they bend down against the sight body and you lose elevation. I went back to factory after I found a crack where it attaches to the sight body. I've been meaning to buy a Bowen with a custom narrow notch. Edited December 4, 2020 by PatJones Link to comment Share on other sites More sharing options...
pskys2 Posted December 5, 2020 Share Posted December 5, 2020 I've had Millets, Weigand and factory sights on my Revolvers. Hands down I like the Factory .196 Black RS matched with a .125 FO FS usually .250 or .300 in height. It has the deepest notch of those listed and that is my biggest issue, I want that FO to be in the Center of the sight picture, not buried. I'm pretty sure that is what JM used also. Link to comment Share on other sites More sharing options...
Carmoney Posted December 26, 2020 Share Posted December 26, 2020 If you're replacing just the factory sight blade, you will need the little installation kit with a few windage screw (and tiny spring and detent), because the old screw is designed to break when you remove it. It's easier, but much more expensive, to replace the entire rear sight assembly. The Weigand product would be much better if it were made from steel instead of aluminum. I had one on a competition gun for a couple years, and the anodizing quickly wore through and there is no good way to recolor it. A steel blade can be blackened with a little G96 cold blue. The Weigand blade also fits loosely, and there is something unsettling about having a sloppy blade that wiggles around when you touch it--although I must admit I don't think it really affects anything from a shooting perspective. The Bowen product is very expensive and almost impossible to find in stock. The LPA product is pretty popular, and seems to work well. It's uglier than sin, though. The Millett target rear sight is my absolute favorite, but they dropped it from production years ago. Link to comment Share on other sites More sharing options...
RePete Posted December 27, 2020 Share Posted December 27, 2020 While the Smith sight is good, I really like the Millett on my 4" Smith. Never had an issue with either sight. As Carmoney said, get the installation kit. Link to comment Share on other sites More sharing options...
Joe4d Posted December 27, 2020 Share Posted December 27, 2020 I just got a C&S fixed rear that mounts in place of the rear adjustable. I also have a new V notch blade kit... in addition to the screw kit, IIRC you need a security style spanner driver bit,, makes things hella easier. While I am fine with the factory rear on my 5" 686 I changed to a Dawson FO front. That gun has the bayonet style quick change blade. So was simple fix. My other smith is a serious gun and frankly the sight combination is horrible. Not to mention the super light trigger screws me up. Anyone done a trigger job to make DA heavier ? But back to the sights issue. I agree with pskys2 up there. This gun is a 2.75" 386SC (scadmium lightweight L frame ) The rear blade is very shallow and narrow, the front sight is that black ramped serrated job that completely fills the notch and seems to be specifically designed to be invisible. Ive used that type of blade before without issue so I am guessing its mainly the width is too wide for the short barrel. Have a Dawson FO thin one on hand for it. Unfortunately it is the pinned in variety and havent got up nerve to drill it out yet... WHile on subject,, #52 bit ? Id also like to see how well this C&S fixed rear will index both side to side and height. The V notch adjustable and FO will be plan B Link to comment Share on other sites More sharing options...
ysrracer Posted December 27, 2020 Share Posted December 27, 2020 Speaking of front sights, the SDM Super Sight it's the only thing that allows me to keep shooting at 62 years old. It's a larger fiber optic. http://www.sdmfabricating.com/Super_Sights.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now