SingInTheRain Posted January 12, 2020 Share Posted January 12, 2020 @TRUBL Any status when the extreme feed 5.25" barrel will be back in stock? I received the DBRS and ESSB but now the matching barrel is out of stock Link to comment
Ontos Posted January 12, 2020 Share Posted January 12, 2020 Also? How about that pinned and welded 13.5”? Building a back up before Nats. Link to comment
TRUBL Posted January 13, 2020 Share Posted January 13, 2020 15 hours ago, SingInTheRain said: @TRUBL Any status when the extreme feed 5.25" barrel will be back in stock? I received the DBRS and ESSB but now the matching barrel is out of stock We should have them back in stock ready to ship next week.....everythign is out for plating, as soon as we KNOW when they are coiming back to our shop we will have them available for pre-order. We are also working on the 13.5" and a new 10" barrel with a pinned and weld brake as well......about 3 or 4 weeks for those Link to comment
cking Posted January 19, 2020 Share Posted January 19, 2020 I got to shoot one and inspect it. Amazing difference, totally changes the recoil impulse. If I get chance we've got the mantis we will plot old vs new. Greatly lessened the time, used be three parts, ignition, bottoming buffer and bolt closing. With reduced math that last two parts are virtually gone. Link to comment
021411 Posted February 1, 2020 Share Posted February 1, 2020 For those using the buffer, did you remove the buffer retaining pin or left it intact? Link to comment
TRUBL Posted February 2, 2020 Share Posted February 2, 2020 We do recommend that you remove it.....it mmmmmmmight work with it installed, but it's best to remove it Link to comment
erwos Posted February 13, 2020 Share Posted February 13, 2020 It's upgrade time for my USPSA/SC PCC, so I want to make sure I get this right... if I buy the ESSB+DBRS combo for my DDLES Glock lower build, will I get all of the following? 1. Short stroke 2. Delayed blowback 3. Functioning LRBHO Link to comment
Wvaughn7 Posted February 13, 2020 Author Share Posted February 13, 2020 2 hours ago, erwos said: It's upgrade time for my USPSA/SC PCC, so I want to make sure I get this right... if I buy the ESSB+DBRS combo for my DDLES Glock lower build, will I get all of the following? 1. Short stroke 2. Delayed blowback 3. Functioning LRBHO I haven’t personally tested that exact combo but a definite yes to the first two items and you should have LRBHO as well with the extreme bolt. Link to comment
OptimiStick Posted February 13, 2020 Share Posted February 13, 2020 2 hours ago, erwos said: It's upgrade time for my USPSA/SC PCC, so I want to make sure I get this right... if I buy the ESSB+DBRS combo for my DDLES Glock lower build, will I get all of the following? 1. Short stroke 2. Delayed blowback 3. Functioning LRBHO Funny timing - I just talked to Tim @ Taccom about this very thing. He said yes, 'maybe' - that it was upper/lower dependent. I'm running NFA upper/lower and he said that should work fine. Unfortunately, he's out of stock on that bolt and it doesn't sound like they're coming back in stock quickly. Link to comment
erwos Posted February 13, 2020 Share Posted February 13, 2020 Yeah, compatibility is always a thing with AR-9s. I get that. Link to comment
Norther Posted February 17, 2020 Share Posted February 17, 2020 On 7/29/2019 at 1:11 PM, TRUBL said: I did a lot of development at another company for what is probably one the most reliable 22RF uppers on the market today and that bolt, does not have a feed ramp......it has a radius to the flat on the bottom.....what that does is allows for the hammer to completely cock sooner... Tim I’d like to know more about this. Shooting more .22 LR at steel these days. What company, if you don’t mind my asking? PM if you prefer. Thanks. Link to comment
erwos Posted April 30, 2020 Share Posted April 30, 2020 I put in my order for the ESSB+DBRS today. Looking forward to taking it for a spin once the 'rona lockdowns around here are lifted. Link to comment
erwos Posted May 24, 2020 Share Posted May 24, 2020 Finally made it out to the range to give it all a try. FCG was a Hipertouch Competition trigger, barrel is a JP Supermatch. Cycling was indeed much faster, with what I think was significantly less sight bounce. Unfortunately, I also got some bursts followed by misfeeds, I think due to hammer follow. I am going to talk to @TRUBL and see if there's something I can do. Otherwise, gonna switch back to a traditional BCG+buffer system to isolate the source of the issues. Link to comment
erwos Posted May 27, 2020 Share Posted May 27, 2020 Follow-up: talked to the man, gonna change to the red springs in my Hipertouch and see if that makes a difference. Very impressed with the level of customer service! Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now