Ck867 Posted November 27, 2017 Share Posted November 27, 2017 What are you using to build a lightweight pcc rifle? Link to comment
MikieM Posted November 27, 2017 Share Posted November 27, 2017 On the back end I've been using a Magpul receiver extension (spring tube) and a Lead Star Ravage butt stock. Lightweight. Looks good. Link to comment
1911luvr Posted November 27, 2017 Share Posted November 27, 2017 Mine isn’t the lightest, but at 5.7lbs it is very manageable. This is a NFA lower, NFA side-charging upper, Taccom ULW barrel, Taccom bolt, JPSCS2-9mm buffer, Hiperfire 24C trigger and MFT Minimalist stock. Sent from my iPhone using Tapatalk Link to comment
Aircooled6racer Posted November 27, 2017 Share Posted November 27, 2017 Hello: Here is mine. 16" KAW valley barrel, Quarter Circle 10 Glock lower, Ergo grip, MFT stock, Raptor LT charging handle, JP bolt/buffer, Hiperfire 24 3-gun or 24C, Oden mag release, MBX aluminum comp, Taccom handguard. 5lbs 8ozs with C-More on top. Thanks, Eric Link to comment
bmiller Posted November 27, 2017 Share Posted November 27, 2017 My lightweight build. Link to comment
UFO Posted November 27, 2017 Share Posted November 27, 2017 NFA Lower Nordic Upper Battle Arms Development stock and buffer tube Taccom handguard, bcg BSF Carbon fiber barrel SJC Titanium Comp Lots of machining of un-necessary metal 5lb 1.4oz Link to comment
L9X25 Posted November 27, 2017 Share Posted November 27, 2017 (edited) I think I need to check the accuracy of my scale, I can see where I could trim 3/4 lb off my (6.5 lb) rifle, but that would still leave close to 6lbs, and it would require that I go with the 5: ULW barrel and minimalist stock. Some are getting close to 5 lbs with a full length steel barrel? Not sure how I could drop another 3/4 pound after that. Edited November 27, 2017 by L9X25 Link to comment
Ck867 Posted November 27, 2017 Author Share Posted November 27, 2017 Is the MFT Minimalist stock the lightest option? Is it adjustable or fixed? Link to comment
Aircooled6racer Posted November 27, 2017 Share Posted November 27, 2017 57 minutes ago, Ck867 said: Is the MFT Minimalist stock the lightest option? Is it adjustable or fixed? Hello: I think it is the lightest adjustable carbine stock at an actual 5.9ozs. You can also reduce weight by using a stripped type upper receiver and a pencil barrel. My barrel only weights 19 ozs without the comp. I could flute it to make it lighter but it is already light enough for me. Thanks, Eric Link to comment
MikieM Posted November 27, 2017 Share Posted November 27, 2017 (edited) 5 hours ago, L9X25 said: I think I need to check the accuracy of my scale, I can see where I could trim 3/4 lb off my (6.5 lb) rifle, but that would still leave close to 6lbs, and it would require that I go with the 5: ULW barrel and minimalist stock. Some are getting close to 5 lbs with a full length steel barrel? Not sure how I could drop another 3/4 pound after that. Yes. I've been wondering how a couple of these guys have gotten under 6 lbs. with a 16 inch barrel and comp, myself. Edited November 27, 2017 by MikieM Link to comment
MikieM Posted November 27, 2017 Share Posted November 27, 2017 1 hour ago, Ck867 said: Is the MFT Minimalist stock the lightest option? Is it adjustable or fixed? You're not counting the buffer tube, are you? The Lead Star comes in at 6 ounces. Link to comment
BartCarter Posted November 27, 2017 Share Posted November 27, 2017 When I put my MFT Minimalist stock on the scale I got 6.07 oz. Link to comment
Aircooled6racer Posted November 27, 2017 Share Posted November 27, 2017 6 minutes ago, BartCarter said: When I put my MFT Minimalist stock on the scale I got 6.07 oz. Hello: My scale is from a lab so it maybe more accurate? Thanks, Eric Link to comment
BartCarter Posted November 27, 2017 Share Posted November 27, 2017 52 minutes ago, Aircooled6racer said: Hello: My scale is from a lab so it maybe more accurate? Thanks, Eric Eric, I'm going to need your address so I can send you my guns to get accurate weights. Do you need them disassembled first, or will you do that? I use one of those kitchen type scales that measure food amounts. Pretty accurate for what I need. To get a little more accuracy, I measure in grams and convert. But who knows what the absolute weights really are on these types of scales. Link to comment
nickbfishn Posted November 27, 2017 Share Posted November 27, 2017 Anyone know the weight on a standard buffer tube? Also, is there a reason nobody has honeycomb’d a tube? Also, if I had a 3D printer I’d make a stock like the lead star shown above. Any 3D printer guys willing to give this a try? I currently have the minimalist stock and it’s ok, but has too much unecesssry stuff on it and the L is too long for my liking. I’ve thought about taking a hacksaw and a dremel to it and removing all the extra material but it would render it to ugly for usage ? Link to comment
Aircooled6racer Posted November 27, 2017 Share Posted November 27, 2017 Hello: If you have a known standards weight to put on your scale to check it that will tell you if your scale is correct. As for your guns leave them assembled so I can shoot the crap out of them. Thanks, Eric Link to comment
Aircooled6racer Posted November 27, 2017 Share Posted November 27, 2017 Hello: The Strike Industries have a similar stock to the MFT but I don't know the weight of it. I like having the stock adjustable since sometimes I just need to move it all the way in. There is another end plate stock that is non adjustable and lighter than the MFT but I can't remember the name of it. I don't mind a little more weight on the stock end. I may even try a shotgun mercury weight in the stock on a Vltor I have. It could work on a Sig MPX buffer tube also. Thanks, Eric Link to comment
BartCarter Posted November 28, 2017 Share Posted November 28, 2017 1 hour ago, nickbfishn said: Anyone know the weight on a standard buffer tube? Also, is there a reason nobody has honeycomb’d a tube?... My BCM milspec buffer tube weighed 3.77 oz. As some people can't stand the "sprong" sound of the spring, I can only imagine what the sound would be with a honeycomb'd buffer tube. Link to comment
Timido Posted November 28, 2017 Share Posted November 28, 2017 https://docs.google.com/spreadsheets/d/1I6Qb6kAJjChEJ56qhznv2291c5UHRDyNXuSXGObumqM/htmlview#gid=102399689 Good read. I did a bunch of math and can save about 1.5 ounce for $200 with of titanium and aluminum. Link to comment
Timido Posted November 28, 2017 Share Posted November 28, 2017 Mine currently is about 6lb 2ounces with a 16" barrel and a comp. Probably a couple of ounces to drop and that's about it. Link to comment
Neomet Posted November 28, 2017 Share Posted November 28, 2017 But this begets the question if lighter is always better for our game or is it a preference?? Link to comment
1911luvr Posted November 28, 2017 Share Posted November 28, 2017 https://docs.google.com/spreadsheets/d/1I6Qb6kAJjChEJ56qhznv2291c5UHRDyNXuSXGObumqM/htmlview#gid=102399689 Good read. I did a bunch of math and can save about 1.5 ounce for $200 with of titanium and aluminum. Is 1.5oz even worth that kind of money? I’d spend $200 to lose a pound, but for that amount I can just take off my watch and save 1.5oz. Sent from my iPhone using Tapatalk Link to comment
1911luvr Posted November 28, 2017 Share Posted November 28, 2017 But this begets the question if lighter is always better for our game or is it a preference?? I think the importance of weight sits on a sliding scale. The farther forward the weight is from your pistol grip, the more important it becomes since it affects your swing. Weight in the stock area doesn’t matter as much since your shoulder bears much of it. However, adding a pound a few inches in front of the barrel but will greatly influence your target transition speed, which is important for games like Steel Challenge. I think it less of a factor in USPSA where double tap speed/accuracy is important, and time can be made up with smart movement, smart reloads and smarter breakdown shooting the stage. Link to comment
Aircooled6racer Posted November 28, 2017 Share Posted November 28, 2017 Hello: The weight in the correct place does help. I am putting a Sig MPX Carbine on a diet right now and will be testing it soon. On the AR9, I have found what works best for me. Too light is not good for USPSA matches. For steel challenge light is best for fast transitions. I would rather spend $200 on more ammo and get in better shape so I can run faster. Thanks, Eric Link to comment
Timido Posted November 28, 2017 Share Posted November 28, 2017 1 hour ago, 1911luvr said: Is 1.5oz even worth that kind of money? I’d spend $200 to lose a pound, but for that amount I can just take off my watch and save 1.5oz. Sent from my iPhone using Tapatalk No it's not worth it. I just thought it was crazy how much you can spend to save very little weight. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now