COLD ETHYL Posted June 15, 2005 Share Posted June 15, 2005 I have used 7625 for 5 or more years(125 gr. jhp). I am trying 115`s. what powder do you use for these two? that is to say what do you use for 115`s and what do you use for 125`s? just wondering Link to comment Share on other sites More sharing options...
eric nielsen Posted June 15, 2005 Share Posted June 15, 2005 3n38 is real nice for Super with the 115s. Around 10 grains. Link to comment Share on other sites More sharing options...
lynn jones Posted June 15, 2005 Share Posted June 15, 2005 i use imr 7625 8.1 gr for 115gr montana gold jhp lynn Link to comment Share on other sites More sharing options...
Sandro Posted June 15, 2005 Share Posted June 15, 2005 How does 3n38 compare to 105? 3n38 is real nice for Super with the 115s. Around 10 grains. <{POST_SNAPBACK}> Link to comment Share on other sites More sharing options...
ricciardelli Posted June 15, 2005 Share Posted June 15, 2005 Bullet: Sierra 115 Grain Jacketed Hollow Point Powder: 10.0 grains of Blue Dot Primer: CCI-500 Case: Remington Firearm: Colt 1911 Velocity: 1408 FPS @ 15' from muzzle Link to comment Share on other sites More sharing options...
Ray_Z Posted June 16, 2005 Share Posted June 16, 2005 9.4 of 3n37 behind a zero 115 works great for me. Link to comment Share on other sites More sharing options...
n2ipsc Posted June 16, 2005 Share Posted June 16, 2005 I have used 7625 for 5 or more years(125 gr. jhp). I am trying 115`s. what powder do you use for these two? that is to say what do you use for 115`s and what do you use for 125`s? just wondering <{POST_SNAPBACK}> 8.5-8.6 gr V-V N350 under a 115 MT Gold JHP...spark with a Fed 205 primer... Link to comment Share on other sites More sharing options...
BSeevers Posted June 16, 2005 Share Posted June 16, 2005 3n37 There is no substitute Link to comment Share on other sites More sharing options...
stingerjg Posted June 16, 2005 Share Posted June 16, 2005 I just finished off the last of my VV N350, so now im gonna use up the pound or two of N340 that i have sitting around. Ill prob settle on 7625 when the VV is gone. Ive been shooting 125gr Zero JHP bullets, I dont like the 115's for some reason. Link to comment Share on other sites More sharing options...
PaulW Posted June 17, 2005 Share Posted June 17, 2005 I hear Bullseye works the best in 38 super. hehehehehhehehehehe Link to comment Share on other sites More sharing options...
COLD ETHYL Posted June 17, 2005 Author Share Posted June 17, 2005 paul, is that a compressed load!! Link to comment Share on other sites More sharing options...
SRT Driver Posted June 20, 2005 Share Posted June 20, 2005 3n37There is no substitute FLASH....BOOOOM!!! 3N37....All flash , all noise, all of the time! 7.7 N350 with a Zero 125 JHP gets 171PF. After the N350 is gone, it'll be 7625. A friend shoots 10.2 of N105 with a 124 and it's a nice load. I hear Bullseye works the best in 38 super.hehehehehhehehehehe Isn't Tightgroup more desirable now? Fill it up and smash a bullet on top then watch your barrel hood and slide go into orbit!! Link to comment Share on other sites More sharing options...
Harmon Posted June 27, 2005 Share Posted June 27, 2005 IMR 4756 3N37 is the substitute Link to comment Share on other sites More sharing options...
GuildSF4 Posted June 27, 2005 Share Posted June 27, 2005 SV recommends 3N38. See their website, it talks about the warranty also. Link to comment Share on other sites More sharing options...
Matthew_Mink Posted June 27, 2005 Share Posted June 27, 2005 3n37, 121gr Zero JHP, but I'm only a very occasional Open shooter.... Link to comment Share on other sites More sharing options...
DJPoLo Posted June 27, 2005 Share Posted June 27, 2005 Just in case any newbies are reading this: Those guys are joking. Do NOT attempt to make Major in .38 Super with Titegroup or Bullseye! -Chet Link to comment Share on other sites More sharing options...
PaulW Posted June 28, 2005 Share Posted June 28, 2005 We were? Ok ok yes I was. Although ask Dan abouting shooting bullseye with an open gun. hmmmm.... Link to comment Share on other sites More sharing options...
dirtypool40 Posted June 28, 2005 Share Posted June 28, 2005 I use whatever PaulW or BlackBird load for me Link to comment Share on other sites More sharing options...
PaulW Posted June 28, 2005 Share Posted June 28, 2005 Really Eric? Then I have some special rounds for you Saturday.(hehe) Link to comment Share on other sites More sharing options...
Ray_Z Posted June 29, 2005 Share Posted June 29, 2005 3n37There is no substitute <{POST_SNAPBACK}> and it smells like napalm in the morning..... victory Link to comment Share on other sites More sharing options...
mike4045 Posted July 5, 2005 Share Posted July 5, 2005 Settled on 7625. Really like this stuff. Link to comment Share on other sites More sharing options...
Dream Posted July 24, 2005 Share Posted July 24, 2005 4756 & N105 Link to comment Share on other sites More sharing options...
BOGA Posted July 24, 2005 Share Posted July 24, 2005 I use 7625 and Hornady HP. This combination is consistent on my guns. But that doesnt mean I didnt try other powders. If I ran out of 7625, then my back-up is N350 or 3N37. 9x23 and 38S Link to comment Share on other sites More sharing options...
ipscron2000 Posted July 24, 2005 Share Posted July 24, 2005 Hodgdon HS7 Link to comment Share on other sites More sharing options...
AikiDale Posted July 24, 2005 Share Posted July 24, 2005 Ditto HS7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now