rlrock Posted May 15, 2018 Share Posted May 15, 2018 Has anyone lightened their slide on the TSO? I was wondering if it's worth it when shooting limited in USPSA. Thanks! Link to comment Share on other sites More sharing options...
aztomex Posted May 16, 2018 Share Posted May 16, 2018 Just ran into an issue tonight with my .40 The trigger pull was consistently changing and would get increasingly difficult to pull after the first round out of a mag. I would put a mag in and chamber a round, the first pull was normal then everything after was very heavy. Any ideas? Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 19, 2018 Share Posted May 19, 2018 Any chance you know if the Tanfoglio thumbrest holes are the same pattern as the factory CZ TSO?Sent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
Greengun Posted May 19, 2018 Share Posted May 19, 2018 If you are asking about the frame mount holes, TSO and CM have the same location and 14.6mm hole spacing but Tanfoglio has 10mm spacing and is further forward towards dustcover. Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 19, 2018 Share Posted May 19, 2018 If you are asking about the frame mount holes, TSO and CM have the same location and 14.6mm hole spacing but Tanfoglio has 10mm spacing and is further forward towards dustcover. Aw man, yes I was asking about the frame holes for thumbrest because I was thinking of ordering the DAA adjustable thumbrest with 3 holesSent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
George16 Posted May 19, 2018 Share Posted May 19, 2018 23 minutes ago, Inkw8ll said: Aw man, yes I was asking about the frame holes for thumbrest because I was thinking of ordering the DAA adjustable thumbrest with 3 holes Sent from my SM-N950U1 using Tapatalk Order the DAA thumb rest with the Cmore mounting holes. The a more pattern mounting holes have the same spacing like the TSO/cm. Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 19, 2018 Share Posted May 19, 2018 Order the DAA thumb rest with the Cmore mounting holes. The a more pattern mounting holes have the same spacing like the TSO/cm. DAA I'd saying the Tan and C More are the same hole patterns so that might work. When my factory thumbrest options come in from CZ I will make the decision to pursue it. I'm hoping the new CZ thumbrest does the trickSent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
George16 Posted May 19, 2018 Share Posted May 19, 2018 5 minutes ago, Inkw8ll said: DAA I'd saying the Tan and C More are the same hole patterns so that might work. When my factory thumbrest options come in from CZ I will make the decision to pursue it. I'm hoping the new CZ thumbrest does the trick Sent from my SM-N950U1 using Tapatalk Which thumb rest did you order? By the way, did you receive the screws? Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 19, 2018 Share Posted May 19, 2018 Which thumb rest did you order? By the way, did you receive the screws?I didn't receive the screws yet, they may have been delivered but I've been out of the office. I ordered the other factory options they had, it was like 3 other factory options. About $45 a piece and I felt like experimenting. I will make sure to post them in this thread Sent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
George16 Posted May 19, 2018 Share Posted May 19, 2018 (edited) 6 minutes ago, Inkw8ll said: I didn't receive the screws yet, they may have been delivered but I've been out of the office. I ordered the other factory options they had, it was like 3 other factory options. About $45 a piece and I felt like experimenting. I will make sure to post them in this thread Sent from my SM-N950U1 using Tapatalk I see. I experimented with the thumb rest too. In fact, I just bought an Alpha Reflex thumb rest from the classifieds. The pad is significantly wider than the stock TSO thumb rest so I can’t use it with my RHT holster. The other thumb rest I have is a go gun rest and it’s even larger and wider. These two can only be used with a race holster. The stock TSO thumbrest pad is very small compared to this two. I already cut the go gun rest and drilled new holes on the pad itself for mounting. Edit. just checked the tracking number and says it’s been delivered to your mailbox. Let me know if it’ll work for you. Good luck on your thumb rest experimentation. Edited May 19, 2018 by George16 Link to comment Share on other sites More sharing options...
stuey93 Posted May 20, 2018 Share Posted May 20, 2018 I didn't receive the screws yet, they may have been delivered but I've been out of the office. I ordered the other factory options they had, it was like 3 other factory options. About $45 a piece and I felt like experimenting. I will make sure to post them in this thread Sent from my SM-N950U1 using Tapatalk I got option 2 and the slide stop interferes with it and the screw are a little long. Were these intended to be used on an optics mount or should it screw right on to my TSO? Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 21, 2018 Share Posted May 21, 2018 I didn't get my thumbrest kn from CZ yet if that's what you're asking? I got option 2 and the slide stop interferes with it and the screw are a little long. Were these intended to be used on an optics mount or should it screw right on to my TSO?Sent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
asimonp79 Posted May 21, 2018 Share Posted May 21, 2018 Hello to you guru guys and girls Quick question- What are the spare parts that come inside the CZ TS orange box? Cleaning rod oil what else? I am asking for a friend Thank you kindly Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted May 21, 2018 Share Posted May 21, 2018 I didn't receive the screws yet, they may have been delivered but I've been out of the office. I ordered the other factory options they had, it was like 3 other factory options. About $45 a piece and I felt like experimenting. I will make sure to post them in this thread Sent from my SM-N950U1 using TapatalkI am interested in the 3 other factory thumb rests. Please let us know how you like them. I find the one that came with the TSO to be OK. I like the position and the angle, but wish it was wider. So, mounting the thumb rest on top of an optic mount will make it a bit wider. Link to comment Share on other sites More sharing options...
adamge Posted May 21, 2018 Share Posted May 21, 2018 If someone finds a thumbrest that is a drop-in replacement for the TSO factory thumb rest, and puts the rest farther forward on the gun, please tag me. I find the factory one too close to the back of the gun for my long thumbs. Link to comment Share on other sites More sharing options...
asimonp79 Posted May 21, 2018 Share Posted May 21, 2018 20 minutes ago, adamge said: If someone finds a thumbrest that is a drop-in replacement for the TSO factory thumb rest, and puts the rest farther forward on the gun, please tag me. I find the factory one too close to the back of the gun for my long thumbs. Agreed 100%. Link to comment Share on other sites More sharing options...
858 Posted May 21, 2018 Share Posted May 21, 2018 1 hour ago, adamge said: If someone finds a thumbrest that is a drop-in replacement for the TSO factory thumb rest, and puts the rest farther forward on the gun, please tag me. I find the factory one too close to the back of the gun for my long thumbs. IPSC Alex thumb rest is wider and a little further forward. Link to comment Share on other sites More sharing options...
Inkw8ll Posted May 21, 2018 Share Posted May 21, 2018 If someone finds a thumbrest that is a drop-in replacement for the TSO factory thumb rest, and puts the rest farther forward on the gun, please tag me. I find the factory one too close to the back of the gun for my long thumbs.That's pretty much what I want to go with, but fit in factory location without an optic mount. I do have the mount and the CZ options are on there way. I expect them by weeks endSent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
SilkyJohnson Posted May 24, 2018 Share Posted May 24, 2018 What recoil springs are compatible with 9mm TSO? I'm looking to go a little heavier. From whati have read on this thread, the stock is 13lbs? I use carry/ duty rounds. Link to comment Share on other sites More sharing options...
George16 Posted May 24, 2018 Share Posted May 24, 2018 It also comes with an additional 11 and 16# springs from the factory. You can buy heavier than 13# springs from CZC or CGW. Im using a 10# spring in my TSO. Link to comment Share on other sites More sharing options...
NoKimberDave Posted May 24, 2018 Author Share Posted May 24, 2018 On 5/21/2018 at 1:18 PM, asimonp79 said: Hello to you guru guys and girls Quick question- What are the spare parts that come inside the CZ TS orange box? Cleaning rod oil what else? I am asking for a friend Thank you kindly Should have: extra spring of various weights for hammer and recoil Extra thick and thin shock buffers useless mag loader extra extractor several slide pins (to replace slide release if you wish to not run one) wrenches Might be missing something. Link to comment Share on other sites More sharing options...
stuey93 Posted May 24, 2018 Share Posted May 24, 2018 Getting ready to change the extractor and spring on my TSO. Looks to be staked, any advice for a first timer. Picked up a new pin and spring from my buddies over at CGW. Link to comment Share on other sites More sharing options...
muncie21 Posted May 24, 2018 Share Posted May 24, 2018 2 minutes ago, stuey93 said: Getting ready to change the extractor and spring on my TSO. Looks to be staked, any advice for a first timer. Picked up a new pin and spring from my buddies over at CGW. The pin comes out pretty easily. The replacement and reassembly is straight forward. Link to comment Share on other sites More sharing options...
stuey93 Posted May 24, 2018 Share Posted May 24, 2018 The pin comes out pretty easily. The replacement and reassembly is straight forward.Thanks, tap it out through top back in from top? Link to comment Share on other sites More sharing options...
muncie21 Posted May 24, 2018 Share Posted May 24, 2018 Just now, stuey93 said: Thanks, tap it out through top back in from top? I believe the bottom is flush with the underside of the slide (don't have mine in front of me) and that's where it is staked. So yes, tap it out from top to bottom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now