PRanta Posted June 3, 2018 Share Posted June 3, 2018 If you are looking for a reliable slide lock use the factory follower. You can trim it for greater capacity, but don't expect the same as with Grams or CZC followers.. Link to comment Share on other sites More sharing options...
sixsixnine Posted June 3, 2018 Share Posted June 3, 2018 (edited) 6 hours ago, NCShadow2 said: Got my IPSC. Feels great but have to cut the screws. Yeah, I remember feeling like that should've been in the instructions. I wonder how many people popped the old one off, threw the new one on, and went out to the range without trimming the screws. Edited June 3, 2018 by sixsixnine Link to comment Share on other sites More sharing options...
Greengun Posted June 3, 2018 Share Posted June 3, 2018 If you are looking for a reliable slide lock use the factory follower. You can trim it for greater capacity, but don't expect the same as with Grams or CZC followers..Thanks for the reply. Has anyone tried the CZC base pad with factory follower? I’ll give it try to see how many rounds it adds. Link to comment Share on other sites More sharing options...
Inkw8ll Posted June 3, 2018 Share Posted June 3, 2018 I've used the gram springs #11 with their followers with no issues. But I'm using Springer base pads, not CZCSent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
Greengun Posted June 3, 2018 Share Posted June 3, 2018 I've used the gram springs #11 with their followers with no issues. But I'm using Springer base pads, not CZCSent from my SM-N950U1 using TapatalkOh, do you get reliable slide lock on last round? Link to comment Share on other sites More sharing options...
NCShadow2 Posted June 4, 2018 Share Posted June 4, 2018 7 hours ago, sixsixnine said: Yeah, I remember feeling like that should've been in the instructions. I wonder how many people popped the old one off, threw the new one on, and went out to the range without trimming the screws. Used the factory black screws works perfect and gives some contrast. Perfect! Link to comment Share on other sites More sharing options...
Inkw8ll Posted June 4, 2018 Share Posted June 4, 2018 Oh, do you get reliable slide lock on last round? Yes, never an issue with my mag. I have more issues with screws backing out on my DAA holster/mag pouches.Sent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
stuey93 Posted June 4, 2018 Share Posted June 4, 2018 What am I missing?? CZ spring and follower. Obviously not sitting right and it’s on all three mags. Hoping something dumb I did[emoji37] Part # 10522 10 coil kit Link to comment Share on other sites More sharing options...
muncie21 Posted June 4, 2018 Share Posted June 4, 2018 (edited) @stuey93 - That follower looks pretty normal for a CZC follower. I have both (CZC and Grams) they work, however I prefer the grams. Edited June 4, 2018 by muncie21 Link to comment Share on other sites More sharing options...
stuey93 Posted June 4, 2018 Share Posted June 4, 2018 @stuey93 - That follower looks pretty normal for a CZC follower. I have both (CZ and Grams) they work, however I prefer the grams. Grams on left? Link to comment Share on other sites More sharing options...
muncie21 Posted June 4, 2018 Share Posted June 4, 2018 (edited) 20 hours ago, stuey93 said: Grams on left? Yep, the .40 mag has 10/11 coil spring kit, which holds 20 rounds, slide locks ~80% of the time. Edited June 4, 2018 by muncie21 Link to comment Share on other sites More sharing options...
858 Posted June 4, 2018 Share Posted June 4, 2018 10 hours ago, stuey93 said: What am I missing?? CZ spring and follower. Obviously not sitting right and it’s on all three mags. Hoping something dumb I did Part # 10522 10 coil kit Neither the CZC or Grams kits are drop in. The Grams followers have to be filed. The CZC springs have to be bent. Call CZC and they will give you the instructions for which part of the spring needs bending. Link to comment Share on other sites More sharing options...
stuey93 Posted June 4, 2018 Share Posted June 4, 2018 Neither the CZC or Grams kits are drop in. The Grams followers have to be filed. The CZC springs have to be bent. Call CZC and they will give you the instructions for which part of the spring needs bending.Thanks Link to comment Share on other sites More sharing options...
NCShadow2 Posted June 5, 2018 Share Posted June 5, 2018 23 hours ago, 858 said: Neither the CZC or Grams kits are drop in. The Grams followers have to be filed. The CZC springs have to be bent. Call CZC and they will give you the instructions for which part of the spring needs bending. Can you provide a description of where you filed the Grams? Have TSO with CZC 140 plates and Grams 11 kit. I am getting auto-forward but no slidelock on last round. Thanks Link to comment Share on other sites More sharing options...
858 Posted June 5, 2018 Share Posted June 5, 2018 You file the front of the follower. That combination isn't going to lock the slide back. Link to comment Share on other sites More sharing options...
Inkw8ll Posted June 5, 2018 Share Posted June 5, 2018 Neither the CZC or Grams kits are drop in. The Grams followers have to be filed. The CZC springs have to be bent. Call CZC and they will give you the instructions for which part of the spring needs bending.That's not true, I used the gram with Springer plates (both 140mm and stockish height) and works fine. I just dropped it in and shot 3 matches so far with it with one match being 6 stages of classifiers Sent from my SM-N950U1 using Tapatalk Link to comment Share on other sites More sharing options...
NCShadow2 Posted June 5, 2018 Share Posted June 5, 2018 24 minutes ago, 858 said: You file the front of the follower. That combination isn't going to lock the slide back. Thanks! What combo will auto-forward and lock the slide? Link to comment Share on other sites More sharing options...
858 Posted June 5, 2018 Share Posted June 5, 2018 1 hour ago, NCShadow2 said: Thanks! What combo will auto-forward and lock the slide? There isn't one. Your slide stop is a crutch for poor stage planning. Link to comment Share on other sites More sharing options...
Bill Schwab Posted June 11, 2018 Share Posted June 11, 2018 (edited) Great informative thread. Planning to buy a TSO 9mm but getting the impression they are coming in the country in small drinks and drabs so I can’t find a reasonably priced new one yet. How is the longevity/lifespan of the mags? A friend told me his feel thin and not very durable. Edited June 11, 2018 by Bill Schwab Link to comment Share on other sites More sharing options...
muncie21 Posted June 11, 2018 Share Posted June 11, 2018 5 hours ago, Bill Schwab said: How is the longevity/lifespan of the mags? A friend told me his feel thin and not very durable. I estimate that my TSO .40 mags have close to 20K rounds through them, between me and the original owner. I have encountered a broken slide stop/release and the factory adjustable sight came apart, however the mags are good to go. You may need to squeeze the feed lips every now and again if you experience feeding issues. However I haven't experienced any other issues (I have a 9mm TSO also) with either of my guns. Unlike other platforms, these mags don't require 'tuning' out of the box in order to function Link to comment Share on other sites More sharing options...
pc13 Posted August 13, 2018 Share Posted August 13, 2018 Does anyone know where u can buy a CZ Tactical Sport Orange in 40 cal for USPSA. Most places are showing out of stock. Link to comment Share on other sites More sharing options...
bemanuel Posted August 14, 2018 Share Posted August 14, 2018 (edited) 44 minutes ago, pc13 said: Does anyone know where u can buy a CZ Tactical Sport Orange in 40 cal for USPSA. Most places are showing out of stock. Looking for new or will you consider used? Edited August 14, 2018 by bemanuel Link to comment Share on other sites More sharing options...
pc13 Posted August 14, 2018 Share Posted August 14, 2018 New Link to comment Share on other sites More sharing options...
bemanuel Posted August 14, 2018 Share Posted August 14, 2018 28 minutes ago, pc13 said: New Try frontlinearmsinc.com Tel - (864) 607-6470 Link to comment Share on other sites More sharing options...
pc13 Posted August 14, 2018 Share Posted August 14, 2018 Bad link Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now