wtturn Posted November 16, 2016 Share Posted November 16, 2016 Has anyone successfully run a Hiperfire Hipertouch EDT/ EDT2/ EDT3 trigger group in a 9mm PCC? Seems like a reasonable compromise between a mil-spec LPK trigger and a high-dollar go fast trigger. What are other < $100 options I should consider? Link to comment
lumberjack149 Posted November 17, 2016 Share Posted November 17, 2016 I have been running the edt3 in my PCC with no issues but I only have 500rds through it so far. I emailed hiperfire and they said it should work fine Link to comment
shutr Posted November 17, 2016 Share Posted November 17, 2016 Funny you should ask. I have a SIG MPX, just asked Hyperfire if any of their triggers would work. Response was 'Yes the 24 series works great in the MPX". I'm tempted to try one. Link to comment
Marshal82 Posted November 17, 2016 Share Posted November 17, 2016 Both my 24-3G and my EDT & EDT2 triggers work great. Link to comment
Philip Dedmon Posted November 18, 2016 Share Posted November 18, 2016 Put a 24C in my PCC. That's what I use in my 223's and wanted the 9mm to be the same. Link to comment
-=VILLAMOR=- Posted November 19, 2016 Share Posted November 19, 2016 On 11/16/2016 at 6:51 PM, shutr said: Funny you should ask. I have a SIG MPX, just asked Hyperfire if any of their triggers would work. Response was 'Yes the 24 series works great in the MPX". I'm tempted to try one. I personally confirm this. I gladly volunteered my MPX as the test firearm for the 24C. I brought my MPX to the Hyperfire shop and we installed the 24C in it. Took it to the range and it functioned great. Link to comment
shutr Posted December 5, 2016 Share Posted December 5, 2016 On 11/18/2016 at 8:17 PM, -=VILLAMOR=- said: I personally confirm this. I gladly volunteered my MPX as the test firearm for the 24C. I brought my MPX to the Hyperfire shop and we installed the 24C in it. Took it to the range and it functioned great. How many rounds fired? any issues? I bought the 243g and installed it but have not dad a chance to try it out. Link to comment
-=VILLAMOR=- Posted December 6, 2016 Share Posted December 6, 2016 On 12/5/2016 at 6:58 AM, shutr said: How many rounds fired? any issues? I bought the 243g and installed it but have not dad a chance to try it out. Over 1,000 now since I've installed it and not a single issue. Ran it through a whole match last Sunday with no problems. Link to comment
-=VILLAMOR=- Posted December 19, 2016 Share Posted December 19, 2016 On 11/18/2016 at 8:17 PM, -=VILLAMOR=- said: I personally confirm this. I gladly volunteered my MPX as the test firearm for the 24C. I brought my MPX to the Hyperfire shop and we installed the 24C in it. Took it to the range and it functioned great. I'm not an actor by any means, but here is the video from Hyperfire of me testing the 24C in the MPX Pistol and SBR. https://youtu.be/joWb4J9vV1U Link to comment
Swiftkill Posted August 5, 2019 Share Posted August 5, 2019 What weight trigger pull are you guys using? My Hiperfire ECL is set at around 2 # which increases the hammer tension. I am having some fail to eject problems AND the hammer is getting beat up, worn and dented. Im assuming due to the increase in resistance. I think if you have your triggers set at 3 -4 pounds you may not have problems or may not have noticed the wear yet. Any replies would be appreciated. Thanks, Mike Link to comment
MoRivera Posted August 5, 2019 Share Posted August 5, 2019 I run the 'Reflex' which was formerly the 24E, I think. Completely reliable with both sets of springs, but I also attribute that to my BCG which has been reliable with a bunch of different triggers and uppers. I do however keep an eye on my firing pins and keep some replacements handy. Link to comment
gerritm Posted August 5, 2019 Share Posted August 5, 2019 We have run the Hiperfire EDT in 2 different PCC's and also in an AR I just finished building. It was the recommended trigger for NFA pcc BCG. Great triggers for the money, right around 4# no creep and quick reset. Highly recommend them. They were on sale at Joe Bob for around $60. gerritm Link to comment
AHI Posted August 5, 2019 Share Posted August 5, 2019 (edited) Delete Edited August 5, 2019 by AHI Link to comment
JohnnyD Posted August 6, 2019 Share Posted August 6, 2019 On 12/5/2016 at 7:58 AM, shutr said: How many rounds fired? any issues? I bought the 243g and installed it but have not dad a chance to try it out. I have about 6k on my PSA lower with the 243G and ULW upper. Link to comment
2alphas Posted August 6, 2019 Share Posted August 6, 2019 thousands of rounds in PCC platforms as well as things A/AR-10 with EDTs, Eclipse, 243G Hiperfire triggers. NO issues. Link to comment
ck1 Posted August 22, 2019 Share Posted August 22, 2019 (edited) Been running a 243G/Reflex and it’s been 100% (granted the MPX is new with just over 1500rds), but it’s cool to know they support it and will back it up if issues arise. Seems they recommend the Hipertouch series over the EDT’s. Found this from the mothership: https://hiperfire.zendesk.com/hc/en-us/articles/360024568454-Which-trigger-is-right-for-my-MPX-or-PCC-platform- Edited August 22, 2019 by ck1 Link Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now