n0glock Posted June 20, 2016 Share Posted June 20, 2016 I need to get the trigger guard undercut on my gen 4 Glock 19 so I can get a comfortable grip. Any suggestions of someone that does good work at a fair price. Link to comment Share on other sites More sharing options...
dapribek Posted June 20, 2016 Share Posted June 20, 2016 Robar, I think. Link to comment Share on other sites More sharing options...
DreGarciaTAT2 Posted June 20, 2016 Share Posted June 20, 2016 I actually really dislike Robards quality of work... There are a couple really good frame customization companies out there. My main sponsored my favorite- Glock Prazision... (Obviously) But here a list of places who's work a love: SSVi, LLC Boresight Solutions GNP Tactical SG Firearms Fine Line Tactical, LLC Weapons Armament Research Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Marshal82 Posted June 21, 2016 Share Posted June 21, 2016 Check out Mod1Firearms http://mod1firearms.com/ Link to comment Share on other sites More sharing options...
superluckycat Posted June 21, 2016 Share Posted June 21, 2016 Pretty easy to do yourself with a Dremel and cylinder sanding attachment. You can rough it in with the Dremel then polish it with fine grit sandpaper. Just go slow. I do mine myself (I still get Glock knuckle though.) I still don't have the guts to stipple myself though. Link to comment Share on other sites More sharing options...
striped1 Posted June 21, 2016 Share Posted June 21, 2016 http://www.advancedperformanceshooting.com/ Link to comment Share on other sites More sharing options...
SDchillin Posted June 22, 2016 Share Posted June 22, 2016 (edited) I really like Stipp Grips. The gentleman who owns and operates the company, Jonathan Ramos, offers quality work with relatively quick turnaround times (less than a month). The company does not have a website yet, but they do have a somewhat prominent Instagram account. The Instagram account lists the contact information needed to obtain a price sheet, but I have also posted the email address below. I have had him complete one frame so far and currently have another in the shop. Email: stippgrips@gmail.com https://www.instagram.com/stippgrips/ Edited June 22, 2016 by SDchillin Link to comment Share on other sites More sharing options...
JOThompson Posted July 5, 2016 Share Posted July 5, 2016 I have a Glock 21 SF with trigger undercut job and stippling by Robar. I am not a fan. Try Taran Tactical. Above average for the money. Link to comment Share on other sites More sharing options...
HCH Posted July 11, 2016 Share Posted July 11, 2016 Pretty easy to do yourself with a Dremel and cylinder sanding attachment. You can rough it in with the Dremel then polish it with fine grit sandpaper. Just go slow. I do mine myself (I still get Glock knuckle though.) I still don't have the guts to stipple myself though. Yup Link to comment Share on other sites More sharing options...
racingjoe27 Posted July 12, 2016 Share Posted July 12, 2016 http://www.advancedperformanceshooting.com/ +1 Link to comment Share on other sites More sharing options...
DreGarciaTAT2 Posted July 24, 2016 Share Posted July 24, 2016 (edited) Pretty easy to do yourself with a Dremel and cylinder sanding attachment. You can rough it in with the Dremel then polish it with fine grit sandpaper. Just go slow. I do mine myself (I still get Glock knuckle though.) I still don't have the guts to stipple myself though. Yeah, it isn't hard to do it yourself... But for that high quality professional look and feel. A specialist couldn't hurt. I really like the attention to detail that some of the high end companies are doing these days. Sent from my iPhone using Tapatalk Edited July 24, 2016 by DreGarciaTAT2 Link to comment Share on other sites More sharing options...
Edge40 Posted July 24, 2016 Share Posted July 24, 2016 Robar does some nice stippling on blocks. Im sure they could do that for you. Link to comment Share on other sites More sharing options...
corey4 Posted July 25, 2016 Share Posted July 25, 2016 i do all of my undercuts my self along with cutting off the finger grove bumps and the "thumb rest" above the mag release. if you do it yourself, you can trim to fit your hand. if you have someone else do it, they will more than likely just use a standard template that may or may not be what you want. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted July 27, 2016 Share Posted July 27, 2016 I need to get the trigger guard undercut on my gen 4 Glock 19 so I can get a comfortable grip. Any suggestions of someone that does good work at a fair price.Send it to us. We'd be happy to take care of you! Link to comment Share on other sites More sharing options...
fishsticks Posted July 27, 2016 Share Posted July 27, 2016 Taran tactical does top flight work on Glocks. Link to comment Share on other sites More sharing options...
Rangerdug Posted July 29, 2016 Share Posted July 29, 2016 I need to get the trigger guard undercut on my gen 4 Glock 19 so I can get a comfortable grip. Any suggestions of someone that does good work at a fair price. MOD1 is a great option. They do some amazing work. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now