sray53txtn Posted February 20, 2016 Share Posted February 20, 2016 Looks like the TS is now available too. 10X Barrel Bushing For Tactical Sport 7520TSX LIMITED QUANTITIES. Our first batch of 10X barrel bushings for Tactical Sport only in 9mm & .40 only. Made from 4140 and heat treated to RC45. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Fits .550″ OD Tactical Sport heavy barrel. NOTE: Some minor fitting may be required. $60.00 Link to comment Share on other sites More sharing options...
huskerlrrp Posted February 20, 2016 Share Posted February 20, 2016 Looks like the TS is now available too. 10X Barrel Bushing For Tactical Sport 7520TSX LIMITED QUANTITIES. Our first batch of 10X barrel bushings for Tactical Sport only in 9mm & .40 only. Made from 4140 and heat treated to RC45. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Fits .550″ OD Tactical Sport heavy barrel. NOTE: Some minor fitting may be required. $60.00 What's the difference from the SP01 and the Tactical sports bushing? Other than possibly some clearance at the bottom of the bushing, they look identical to me. Link to comment Share on other sites More sharing options...
TonytheTiger Posted February 20, 2016 Share Posted February 20, 2016 Entirely different barrel sizes. Link to comment Share on other sites More sharing options...
huskerlrrp Posted February 20, 2016 Share Posted February 20, 2016 Entirely different barrel sizes. Are you so certain? Sure the TS is a longer barrel, but the OD between the SP01 and Tactical Sports is nearly identical. With tolerances I'd say they are the same. In fact, I just put a TS barrel bushing in a SP01 and it functioned perfectly (by hand). Link to comment Share on other sites More sharing options...
bowenbuilt Posted February 20, 2016 Author Share Posted February 20, 2016 According to the explanation and pictures on the website posted to the CZ Forum the TS bushing has a totally different profile than the one intended for the SP01. Both the pictures on the CGW's website are indentical so the actual picture of the TS bushing has really not been added yet. Link to comment Share on other sites More sharing options...
TonytheTiger Posted February 20, 2016 Share Posted February 20, 2016 Entirely different barrel sizes.Are you so certain? Sure the TS is a longer barrel, but the OD between the SP01 and Tactical Sports is nearly identical. With tolerances I'd say they are the same. In fact, I just put a TS barrel bushing in a SP01 and it functioned perfectly (by hand).My bad, I was thinking TS vs. 75/85 barrel O.D., I've never measured the SP01 barrel. Link to comment Share on other sites More sharing options...
busdriver02 Posted February 21, 2016 Share Posted February 21, 2016 It's probably an angles thing. The longer barrel locks and unlocks with less angular deflection. Link to comment Share on other sites More sharing options...
sray53txtn Posted February 21, 2016 Share Posted February 21, 2016 If anyone's interested; I ordered both and can provide a photo side by side comparison once they arrive next week. Link to comment Share on other sites More sharing options...
emjei Posted February 23, 2016 Share Posted February 23, 2016 If anyone's interested; I ordered both and can provide a photo side by side comparison once they arrive next week.Please doMj Link to comment Share on other sites More sharing options...
sray53txtn Posted February 25, 2016 Share Posted February 25, 2016 (edited) OK, Got home from road trip today and bushing were here. I've attached some basic shots. Note: TS bushing on left and Shadow bushing on right. Can't wait to do my before and after tests. Regards, Rinoray53 Edited February 25, 2016 by Rinoray53 Link to comment Share on other sites More sharing options...
Tok36 Posted February 27, 2016 Share Posted February 27, 2016 ^^ Thank you for the pics. Link to comment Share on other sites More sharing options...
mjmagee67 Posted February 28, 2016 Share Posted February 28, 2016 How does the legality of the CGW bushing fall in with the S&W M&P mag release issue? The NROI has stated you can use a extended after market mag release on an M&P as long is it is the same general shape and only longer. This makes the Springer Prescion extended mag release production legal. The CGW 10X bushing is just an after market Accushadow bushing. Link to comment Share on other sites More sharing options...
mjmagee67 Posted February 28, 2016 Share Posted February 28, 2016 How does the legality of the CGW bushing fall in with the S&W M&P mag release issue? The NROI has stated you can use a extended after market mag release on an M&P as long is it is the same general shape and only longer. This makes the Springer Prescion extended mag release production legal. The CGW 10X bushing is just an after market Accushadow bushing. Link to comment Share on other sites More sharing options...
chilly636 Posted February 28, 2016 Share Posted February 28, 2016 (edited) Im new to the cz platform...are all sp-01 barrels considered a "heavy barrel"? Edited February 28, 2016 by chilly636 Link to comment Share on other sites More sharing options...
IDescribe Posted February 28, 2016 Share Posted February 28, 2016 How does the legality of the CGW bushing fall in with the S&W M&P mag release issue? The NROI has stated you can use a extended after market mag release on an M&P as long is it is the same general shape and only longer. This makes the Springer Prescion extended mag release production legal. The CGW 10X bushing is just an after market Accushadow bushing. Here's your applicable rule: 21.6 Exchange of minor EXTERNAL components Sights, firing pins, firing pin retainers, pins, extractors and ejectors MAY be replaced with OFM or aftermarket parts. Any other components which are externally visible may ONLY be replaced with OFM parts which are offered on the specific model of gun or another approved gun from the same manufacturer. The 10X bushing is external. The 10X bushing is NOT an aftermarket Accushadow bushing. If the 10X bushing were an aftermarket Accushadow bushing, you'd be able to install a 10X bushing in an Accushadow, but you can't. The Accushadow bushing is a 1911 match bushing installed in a slide that has been milled to accept it. The 10X bushing is an external aftermarket replacement for the CZ stock service bushing. Such a replacement is prohibited by 21.6 The NROI ruling on the Springer mag release for the M&P applies only to the Springer mag release for the M&P. It does not affect the legality of any other part on any other pistol. UNLESS a modification is SPECIFICALLY authorized in the rules or SPECIFICALLY authorized in an official, published NROI interpretation, it is considered a PROHIBITED MODIFICATION. Link to comment Share on other sites More sharing options...
chilly636 Posted March 2, 2016 Share Posted March 2, 2016 So I'm new and getting into USPSA shooting...If I install this bushing in my SP-01 what class would that put me in? I would already be in limited class. Link to comment Share on other sites More sharing options...
IDescribe Posted March 2, 2016 Share Posted March 2, 2016 It would put you in Limited. Link to comment Share on other sites More sharing options...
chilly636 Posted March 2, 2016 Share Posted March 2, 2016 Thanks! Link to comment Share on other sites More sharing options...
cpa5oh Posted March 4, 2016 Share Posted March 4, 2016 Put one in my tactical sport a week ago and have shot a couple hundred rounds with it - no issues. Link to comment Share on other sites More sharing options...
TonytheTiger Posted March 4, 2016 Share Posted March 4, 2016 Put one in my tactical sport a week ago and have shot a couple hundred rounds with it - no issues. Stop being a tease man! How was the accuracy?!?! Link to comment Share on other sites More sharing options...
sray53txtn Posted March 4, 2016 Share Posted March 4, 2016 Finally has some time away from work to install mine last night. Can't wait until weekend to perform my comparison tests. Link to comment Share on other sites More sharing options...
cpa5oh Posted March 4, 2016 Share Posted March 4, 2016 Hard to notice a difference with the kind of shooting I've done with it, which has been typical uspsa type shooting that you can do indoors (I haven't bagged it and shot groups). There was definitely play between my stock barrel and stock barrel bushing - now there is none. I'll say I've shot it very accurately with zero flyers (unexpected non alphas). I'll be a little more confident on the tight shots. Link to comment Share on other sites More sharing options...
sray53txtn Posted March 4, 2016 Share Posted March 4, 2016 I shot my initial comparisons off bag at 25yds, so to be consistent will do with same ammo/distance this weekend. Don't have a Ransom rest, poor shot with most any angle so I will notice an improvement. If interested I'll post targets when completed. Link to comment Share on other sites More sharing options...
Gcarr Posted March 11, 2016 Share Posted March 11, 2016 I am really interested in the results ... Please post when you can... Ty Link to comment Share on other sites More sharing options...
bassman5 Posted March 11, 2016 Share Posted March 11, 2016 It is hard for me to understand why you can put this replacement barrel bushing in https://cajungunworks.com/product/75220-sp-01-barrel-bushing/and it is supposedly Legal because it is aFactory bushing and the 10X which is still a bushing that fits the slide and retained the same way but has a tighter clearance but it is not legal? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now