Loves2Shoot Posted April 19, 2014 Share Posted April 19, 2014 (edited) Per customer request, we added the CZ75 to our scope mounts. We are starting out with the Burris/Docter base profile. http://shop.springerprecision.com/product.sc?productId=261&categoryId=42 Edited April 19, 2014 by Loves2Shoot Link to comment Share on other sites More sharing options...
Czhase Posted April 19, 2014 Share Posted April 19, 2014 Very nice product, glad to see Springer getting deeper into the CZ market. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 19, 2014 Author Share Posted April 19, 2014 We need other slide profiles to add the other versions, so if you are interested in a mount we don't have and can send a slide in, we would like to add the other CZ dovetail models. Link to comment Share on other sites More sharing options...
trgt Posted April 19, 2014 Share Posted April 19, 2014 I have a 'decommissioned' CZ75 SP01 Shadow slide you could borrow for a bit for the shadow slide cut, PM in just a bit. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 19, 2014 Author Share Posted April 19, 2014 That would be great. We only need it a few weeks. Link to comment Share on other sites More sharing options...
rack&roll Posted April 19, 2014 Share Posted April 19, 2014 How about for a STS or a RMR? Thanks! Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 19, 2014 Author Share Posted April 19, 2014 We are going to do the RMR. You would need to send the STS in, but we could do that also. Link to comment Share on other sites More sharing options...
IDescribe Posted April 20, 2014 Share Posted April 20, 2014 Out of curiosity, how long would you expect it to take for Shadow cut mounts to become available from the time that the volunteer got a sample slide with Shadow cut into your hands. :-) Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 I should have the first run done in 2 weeks and 1 week is about average for anodizing, so about 3 weeks. Link to comment Share on other sites More sharing options...
Czhase Posted April 20, 2014 Share Posted April 20, 2014 Any plans for a CZ version of your comp to go with that red dot mount? Thanks, Chase Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 20, 2014 Share Posted April 20, 2014 I'd be happy to help with comp development Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 I have a Shadow and TS slide inbound. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 Any plans for a CZ version of your comp to go with that red dot mount? Thanks, Chase I would consider it if barrels are readily available. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 20, 2014 Share Posted April 20, 2014 They are, CZC offers barrels threaded 1/2x28 or you can buy a TS barrel and thread it. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 It sounds like I need to order a TS barrel. Link to comment Share on other sites More sharing options...
cpa5oh Posted April 20, 2014 Share Posted April 20, 2014 I'm following this one... Link to comment Share on other sites More sharing options...
Czhase Posted April 20, 2014 Share Posted April 20, 2014 It sounds like I need to order a TS barrel. Just an FYI if you use a TS barrel in a Standard 75 frame you will need to machine some material off of the lower lug where the guide rod sits for it to lock up properly. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 (edited) Not a problem. I need to run some more XDM comps in the near future. For those that are interested in a comp for the 9mm, are you more interested in one for minor or major? I added a poll at the top. Edited April 20, 2014 by Loves2Shoot Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 20, 2014 Author Share Posted April 20, 2014 (edited) CZ 75 comp CZ75 Comp.pdf Edited April 20, 2014 by Loves2Shoot Link to comment Share on other sites More sharing options...
JetPow Posted April 20, 2014 Share Posted April 20, 2014 CZC threaded barrels shooo expensive. Expensive than 1911 Shuemann threaded bull barrels... Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 20, 2014 Share Posted April 20, 2014 (edited) I like the comp concept, like czhase mentioned the standard CZ 75 9mm with the tapered slide uses a barrel with an OD of 12.75mm while the TS, SP01, and Shadow 9mm use a barrel with an OD of 14mm. If you turned down a TS barrel and threaded it 1/2x28 it would be just right for the comp concept you've drawn there, plus it would also work with the CZC barrels in SP01/Shadow 9mms. What's your thought on keeping the comp from turning? Set screw? Loctite? Your xD comp uses a guide rod extending into the comp right? That's how I do my CZ/Witness comps, but also why I use SP01 slide instead of 75B slides. Edited April 20, 2014 by kneelingatlas Link to comment Share on other sites More sharing options...
trgt Posted April 20, 2014 Share Posted April 20, 2014 Not a problem. I need to run some more XDM comps in the near future. For those that are interested in a comp for the 9mm, are you more interested in one for minor or major? I added a poll at the top. I voted for both :-) Minor -> Steel Challenge Major -> USPSA/Open Link to comment Share on other sites More sharing options...
Rick88 Posted April 20, 2014 Share Posted April 20, 2014 CZ 75 comp That looks great, I bet you would sell quite a few if you could build it in a cone style, if all we had to do was to remove our bushing thread our current barrel and fit the comp to the slide I would order one today... :-) Link to comment Share on other sites More sharing options...
Joe L Posted April 20, 2014 Share Posted April 20, 2014 Scott--I ordered two Burris mounts for the CZ 75B and will use one on a P-09. I currently have a Slaughter two-piece Docter mount on my P-09 and look forward to having your single piece design. Here is how I will be using one mount, the other will go on a 9mm slide for a 75B. This is from this morning. http://youtu.be/y5K2Ol_H6BE Joe Link to comment Share on other sites More sharing options...
SteveC5 Posted April 21, 2014 Share Posted April 21, 2014 I'm in for a shadow mount as soon as they are available, I've been looking for one for a while...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now