Nickoli Posted March 13, 2014 Share Posted March 13, 2014 I bought a case of Rio target loads that were on sale so I picked them up. Me, being a genius, didn't practice with them before a polar match a couple weeks ago, and well I have several failure to ejected. I thought maybe it was my gun and not the ammo because I have never had a problem with any other ammo in my JM. Then my buddy said this week that he was having the same issues with the ammo in his VM. I have noticed the rim looks rounded compared to other ammo, have a feeling thats the problem. Has anyone else had issues with this stuff? Link to comment Share on other sites More sharing options...
Travtastik Posted March 13, 2014 Share Posted March 13, 2014 I shot around 3k of them last year the only problem I had was 1 dud. I had this issue when I would shoot around the left side of a wall. Found out I was not giving it enough room to eject out of the gun. I only had problems at one club on a certain bay and finally figured out what I was doing. Link to comment Share on other sites More sharing options...
Paul-the new guy Posted March 13, 2014 Share Posted March 13, 2014 My 1301 had a few fte's with them at the 3GN regional but it was dry as a bone and brand new. I put some tri-flow on it and it has run 100% since. Link to comment Share on other sites More sharing options...
JPeel Posted March 13, 2014 Share Posted March 13, 2014 I've run 6 cases or so through my Vmax, no problems as long as I keep the gun lubed. Even use rio lo recoil buckshot with no problems. Link to comment Share on other sites More sharing options...
WillM Posted March 13, 2014 Share Posted March 13, 2014 Headed up to the Arizona State Sporting Clays shoot tomorrow and all I shoot is Rio. Right at 80 flats in the last couple of years (20,000 shells). Never had a failure to ignite in my K80. Just received another 40 flats last month so I expect that to continue. One ounce target loads at 1280fps. Link to comment Share on other sites More sharing options...
Nickoli Posted March 13, 2014 Author Share Posted March 13, 2014 Wonder what my issue is then. After I work on the new barrel that I just got ill run some more and see how they do. For all I know it coild be operator error, but I've had the FTEs, and switched to bulk federals right after and she runs like a champ. I'll give it another go this weekend since its going to be in the 40s again. Link to comment Share on other sites More sharing options...
co-exprs Posted March 13, 2014 Share Posted March 13, 2014 (edited) Rio's won't run reliably through either my SuperNova or my Versamax (worse in the Nova). The brass and hull are so thin that the shell expands into the extractor groove on the barrel. It happens with shotguns that use a twist bolt and have a very large extractor groove (Benellis, Berettas, Stoegers, Franchis, 1300s, Versamax). This area of the chamber is unsupported and the case must be strong enough to take the pressure. RIO's are the only brand that has done this in my guns. I'll practice with whatever I can get my hands on, but when I go to matches I only shoot higher quality shells. Aint so bad because matches only constitutes about 20% of my overall ammo consumption. PS... RIO buck and slugs run through my guns fine. Edited March 13, 2014 by co-exprs Link to comment Share on other sites More sharing options...
Therealkoop Posted March 13, 2014 Share Posted March 13, 2014 Rio's won't run reliably through either my SuperNova or my Versamax (worse in the Nova). The brass and hull are so thin that the shell expands into the extractor groove on the barrel. It happens with shotguns that use a twist bolt and have a very large extractor groove (Benellis, Berettas, Stoegers, Franchis, 1300s, Versamax). This area of the chamber is unsupported and the case must be strong enough to take the pressure. RIO's are the only brand that has done this in my guns. I'll practice with whatever I can get my hands on, but when I go to matches I only shoot higher quality shells. Aint so bad because matches only constitutes about 20% of my overall ammo consumption. PS... RIO buck and slugs run through my guns fine. Same issue I have with my Vmax using the #8 2 3/4 dram. They cycle really well, but extraction is poor. If I put a spent hull in the gun and try to cycle it out by hand it just does 180's in the ejection port. Everything else ejects (empty hulls) like you would expect. I cant get through 8 rounds of rio low recoil bird without a failure. Link to comment Share on other sites More sharing options...
ambluemax Posted March 14, 2014 Share Posted March 14, 2014 Bought four flats, first flat had four duds in it. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
co-exprs Posted March 14, 2014 Share Posted March 14, 2014 I reloaded 2000 shells last year with RIO primers. I get about 2% duds with them too. Never made the connection until just now. Link to comment Share on other sites More sharing options...
glock34shooter Posted March 14, 2014 Share Posted March 14, 2014 I have shot a couple thousand through my M2 without any issues. Most of the guys I shot with use Rios, and issues that I recall. I shot Rois for two seasons with out any issues through my SLP Matt Link to comment Share on other sites More sharing options...
Dan Sierpina Posted March 15, 2014 Share Posted March 15, 2014 I've had the 1 1/8 oz at 1250 fps bind up my Super Nova. The same ammo runs just fine in my M2. Link to comment Share on other sites More sharing options...
jcarpenter82 Posted March 15, 2014 Share Posted March 15, 2014 My m3 has fed and ejected every one of the 200 shells of rio i have shot. Typically i shoot walmart bull pack but saw the rio on sale so i figured id try it Link to comment Share on other sites More sharing options...
Xscream Posted March 16, 2014 Share Posted March 16, 2014 Rio and Kemen last year started a joint manufacturing facility state side (TN or KY IIRC). There first couple lots did have some problems. I would consider contacting Rio to determine if your case is one of the effected lots. Typically Rio's are great shells for a budget shooter. Link to comment Share on other sites More sharing options...
NateStaskiewicz Posted March 16, 2014 Share Posted March 16, 2014 I just got back from a 3 gun match and they ran great in my benelli m2 Link to comment Share on other sites More sharing options...
snertley Posted March 17, 2014 Share Posted March 17, 2014 I have had no ignition problems with them. The only issue I had was when I ordered 4 flats of 20g for my daughter I found 7 or 8 boxes where short one round each. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now