Ipsilateral Posted February 23, 2014 Share Posted February 23, 2014 I've got a SP-01, I prefer the factory mags, but at $50 a pop, seems silly when i can only use 10 rounds for production, and when I can get these (brownell's part number 625-000-027WB CZ 75 9mm Blue 16 Rnd. Mfr Part: MGCZ7516B) for $20 with a dealers discount. The SP-01 base pads fit these, but won't fit the gun, are there any other production legal options to make these a viable option? Link to comment Share on other sites More sharing options...
eerw Posted February 23, 2014 Share Posted February 23, 2014 CZC, Springer Precision and Stoeger all make good basepads that will fit the mags and guns. Link to comment Share on other sites More sharing options...
eerw Posted February 23, 2014 Share Posted February 23, 2014 CZ 16, MecGar 16, SP01 mags, CZ plated and AFC mags. http://czcustom.com/CZ_base_pads.aspx MecGar AFC, CZ plated 17rnd, MecGar 16, CZ 16 and SP01 mags http://shop.springerprecision.com/category.sc;jsessionid=89C8C6CD3CB016A1CB8A8966E58A27A5.m1plqscsfapp01?categoryId=42 MecGar AFC and CZ plated mags only http://www.benstoegerproshop.com/CZ-75-85-SP01-Easy-Off-Aluminum-Basepad-p/cz-sf1-a.htm Link to comment Share on other sites More sharing options...
Loves2Shoot Posted February 23, 2014 Share Posted February 23, 2014 Our version will make the 16's, 17's, and 18's all the same length. Link to comment Share on other sites More sharing options...
Ipsilateral Posted February 26, 2014 Author Share Posted February 26, 2014 Thank you, for the replies, I'm going to try out some of your base pads, Link to comment Share on other sites More sharing options...
oldfrank Posted February 27, 2014 Share Posted February 27, 2014 (edited) I don't know if this will help but I removed the metal base pads from the Mecgar magazines and replaced them with pads for the Beretta 92. They fit and work great in my SP-01 and they are inexpensive. Edited February 27, 2014 by oldfrank Link to comment Share on other sites More sharing options...
Jukez Posted April 2, 2014 Share Posted April 2, 2014 Just wanted to double check the 16 Round Factory Basepads will also work on the 16 round mec-gar magazines? I know the CZ basepad is interchangeable between the two.... I just want to make sure it works and is still production legal Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 3, 2014 Share Posted April 3, 2014 (edited) Thanks for letting us know they work Edited April 3, 2014 by Loves2Shoot Link to comment Share on other sites More sharing options...
Jukez Posted April 7, 2014 Share Posted April 7, 2014 Thanks for letting us know they work No prob, and just to let everyone else know.. we have a guy at our local club using them on the mec-gar.. you just have to play around with the locking plate but once you get it in place your are GTG! Link to comment Share on other sites More sharing options...
blueorb Posted April 8, 2014 Share Posted April 8, 2014 +1 on the Springer base pads. Excellent quality. I am running them on the CZC (Mec Gar) nickel plated 17 round mags. Link to comment Share on other sites More sharing options...
Jayohee Posted September 9, 2014 Share Posted September 9, 2014 (edited) Will any of the Springer base pads work with 10 rd 9mm mags from Mec-Gar? Which ones are the pads on the far left in the above pic? I'm assuming they're either the 16 or 17 rounders as the 18 rounders are too tall and keep the mag from being seated in my Accu. Thanks! Edited September 9, 2014 by Jayohee Link to comment Share on other sites More sharing options...
zhunter Posted September 9, 2014 Share Posted September 9, 2014 Our version will make the 16's, 17's, and 18's all the same length. I have these in blue, numbered, and are awesome Link to comment Share on other sites More sharing options...
Magsz Posted September 9, 2014 Share Posted September 9, 2014 Anyone try the springer pads on the p09 mags? Any chance they will fit? I doubt it since the front area of the magazine itself is square doff instead of round. Hrm...crud! Hey SP guys...any chance you're going to make P09 baseplates? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted September 9, 2014 Share Posted September 9, 2014 Anyone try the springer pads on the p09 mags? Any chance they will fit? I doubt it since the front area of the magazine itself is square doff instead of round. Hrm...crud! Hey SP guys...any chance you're going to make P09 baseplates? They are on the list of parts to make. I have another milling center on the way so we will be able to release new products faster. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted September 9, 2014 Share Posted September 9, 2014 Will any of the Springer base pads work with 10 rd 9mm mags from Mec-Gar? Which ones are the pads on the far left in the above pic? I'm assuming they're either the 16 or 17 rounders as the 18 rounders are too tall and keep the mag from being seated in my Accu. Thanks! They won't work with the 10 round mags. Link to comment Share on other sites More sharing options...
Magsz Posted September 9, 2014 Share Posted September 9, 2014 You are the man! Ive got alot of mags that came from the factory with the P07 baseplates which i hate. CZ USA currently does not have the factory P09 pads in stock so im looking for quality replacements. Link to comment Share on other sites More sharing options...
Jayohee Posted September 10, 2014 Share Posted September 10, 2014 Will any of the Springer base pads work with 10 rd 9mm mags from Mec-Gar? Which ones are the pads on the far left in the above pic? I'm assuming they're either the 16 or 17 rounders as the 18 rounders are too tall and keep the mag from being seated in my Accu. Thanks! They won't work with the 10 round mags. Which ones are on the far ends of the picture? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted September 10, 2014 Share Posted September 10, 2014 On either end are the the ones for the factory 16's. Link to comment Share on other sites More sharing options...
Supranatural Posted February 5, 2015 Share Posted February 5, 2015 Will any of the Springer base pads work with 10 rd 9mm mags from Mec-Gar? Which ones are the pads on the far left in the above pic? I'm assuming they're either the 16 or 17 rounders as the 18 rounders are too tall and keep the mag from being seated in my Accu. Thanks! They won't work with the 10 round mags. How about the 15 round Mecgar mags? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted February 5, 2015 Share Posted February 5, 2015 I have never seen 15 round mags. Can you post a photo? Link to comment Share on other sites More sharing options...
eerw Posted February 5, 2015 Share Posted February 5, 2015 Scott the MecGar 15 round mag is similar to the 17 round tube. MecGar also makes a full length tube 10rnd mag with dimple. different than the CZ factory 10 mag. Link to comment Share on other sites More sharing options...
bockerSV Posted February 5, 2015 Share Posted February 5, 2015 Just got a set of springers in and they work really nicely. Buy 6 or more and they're only $15 a piece. And they do fit the mec gar 10 rounders that have the crimp in the body to stop the follower. Wouldn't work in the mags that have the big plastic section at the bottom. Link to comment Share on other sites More sharing options...
YellowShooter Posted February 5, 2015 Share Posted February 5, 2015 PIF... Due to a recent mistake from an CZC order I ended you with 2 of these... I have no use from them. http://czcustom.com/cz75flatalbasepad.aspx There are up for grabs, free! courtesy of me and CZC! Just PM me, first come first serve. Link to comment Share on other sites More sharing options...
YellowShooter Posted February 5, 2015 Share Posted February 5, 2015 DONE! Link to comment Share on other sites More sharing options...
Loves2Shoot Posted February 5, 2015 Share Posted February 5, 2015 Scott the MecGar 15 round mag is similar to the 17 round tube. MecGar also makes a full length tube 10rnd mag with dimple. different than the CZ factory 10 mag. Thanks! Do they have a round restriction dimple? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now