Moltke Posted August 22, 2013 Share Posted August 22, 2013 Recently I installed the Nordic extension on my Versamax Tactical shotgun to give it an total capacity of 12 + 1. Additionally I have in my range bag the parts to change it to a 10 + 1 capacity, or an 8 + 1 capacity if the need arises. First question - I assume that changing capacity on a shotgun while at a match is no different than changing chokes and since you're using the same gun the whole time... it won't change your division/etc. Is that accurate? Second question - Is there a reason to have an extension that holds an odd number of shells? Such as a 9 +1 or an 11 +1? If the new generally accepted loading method is either by 2's or 4's, then how does an odd numbered extension fit into the plan? Link to comment Share on other sites More sharing options...
MarkCO Posted August 22, 2013 Share Posted August 22, 2013 I don't know of any match that lets you change the tube during the match except trooper at IronMan and CTC Invitational. The extra capacity allows you to top off at the beep if you want. 10 or 12 would be prime provided you have an 1/2" past full, otherwise 11 or 13. The longer the tube, especially with clamps and mid-threads, the higher the propensity for feeding problems and the requirement to change the mag tube spring more often. I have gone to 10 and it works for me. Link to comment Share on other sites More sharing options...
gng4life Posted August 22, 2013 Share Posted August 22, 2013 +1 on what Mark said, at most matches it's frown upon and will get you DQ'ed or a stern warning easily... Link to comment Share on other sites More sharing options...
Moltke Posted August 22, 2013 Author Share Posted August 22, 2013 (edited) Didn't realize that about changing magazine tube extensions. I figured for large blasting stages that it would be beneficial to have additional capacity but if you're starting in a car or other tight quarters, it would be nice to have maneuverability without such a large tube banging around. I'll make it a point to decide what to use before shooting starts and not change configuration mid-match. Are there rules somewhere that cover this, or is this just the way it's always been? Edited August 22, 2013 by Moltke Link to comment Share on other sites More sharing options...
michael1778 Posted August 22, 2013 Share Posted August 22, 2013 (edited) Unfortunately, no. Our matches, run by the 3-Gun Nation club match head honcho, would have you DQ'ed right away. Everyone would be apologetic, but firm...."you're out. Hope you come again next month with no hard feelings." Those are 3GN Club Series rules. And that was the rule in our matches before he got that 3GN position. No tube size changes on a gun in competition. Unless you shoot Open, I don't see much of a practical advantage across a match to being able to make such a change. Even in Open, our rule set doesn't allow tube-fed shotguns to vary tube capacity. In Open, I disagree with that since magazine ("box") fed shotguns get that capability by default. "Hmm, I'll take a pair of coupled 10 round magazines with bird shot and then shoot that slug target in the middle of the stage with a 5 rounder with only slugs." This is one of my reasons for going to the dark side of magazine fed shotguns, very soon. I don't think you're giving up much, if anything by keeping it constant, by rule. Edited August 22, 2013 by michael1778 Link to comment Share on other sites More sharing options...
MickB Posted August 22, 2013 Share Posted August 22, 2013 The only advantage to being able to easily change capacity from say, 10 back to 8 would be if you want to use the same shotgun, but in different matches that have different rules. Let's say you shoot SMM3G, you would want your 10+1 configuration as an example. Then you go to another match that has an 8 rd tube capacity only. At that point, you would change out to your 8rd tube BEFORE the match.Since you have the Versamax Tactical, you would use the standard OEM tube. That is how the Roulette Tactical end caps were born, to give the ability to change from 8 to 9 or 10 rds without having to disassemble your clamp/tube and potentially your point of impact.. Same thing with the Carbon Arms Versa Tube - the tube is 8 rds, then you can change out the assemblies on the end to increase capacity based on the match rules you are shooting under. However, whatever configuration you begin the match with, is how you must finish. Mick Link to comment Share on other sites More sharing options...
MarkCO Posted August 22, 2013 Share Posted August 22, 2013 Is not Blue Ridge the only 8 rounds max in the tube match left? Link to comment Share on other sites More sharing options...
michael1778 Posted August 22, 2013 Share Posted August 22, 2013 The only advantage to being able to easily change capacity from say, 10 back to 8 would be if you want to use the same shotgun, but in different matches that have different rules. Let's say you shoot SMM3G, you would want your 10+1 configuration as an example. Then you go to another match that has an 8 rd tube capacity only. At that point, you would change out to your 8rd tube BEFORE the match.Since you have the Versamax Tactical, you would use the standard OEM tube. That is how the Roulette Tactical end caps were born, to give the ability to change from 8 to 9 or 10 rds without having to disassemble your clamp/tube and potentially your point of impact.. Same thing with the Carbon Arms Versa Tube - the tube is 8 rds, then you can change out the assemblies on the end to increase capacity based on the match rules you are shooting under. However, whatever configuration you begin the match with, is how you must finish. Mick Total agreement. I hope my comments didn't confuse on that matter. Configuring a shotgun before a match is a good concept. It's a good thing to have some capacity options at home, ready to go depending on the future situation. Link to comment Share on other sites More sharing options...
Moltke Posted August 22, 2013 Author Share Posted August 22, 2013 Bummer. And I thought I was on to something. I found the rule on the 3GN website noting that shotgun magazine tube length changes are forbidden mid-match. Glad that's sorted out. Link to comment Share on other sites More sharing options...
Brian Payne Posted August 22, 2013 Share Posted August 22, 2013 Is not Blue Ridge the only 8 rounds max in the tube match left? Task Force Dagger as well. I personally like having the different match rules. I use a 10 rd tube and always carry a plug that limits it to 8 rds. Set for everything. Not to drift the thread but I personally think an all shotgun match (since it is all about the shotgun) should have tubes plugged at the 8 rd limit. What say you? Link to comment Share on other sites More sharing options...
rlillyskygod Posted August 22, 2013 Share Posted August 22, 2013 Just shoot open and you have no problem 18 rounds and good to go. Link to comment Share on other sites More sharing options...
APL-G35 Posted August 22, 2013 Share Posted August 22, 2013 (edited) Is not Blue Ridge the only 8 rounds max in the tube match left?Task Force Dagger as well. I personally like having the different match rules. I use a 10 rd tube and always carry a plug that limits it to 8 rds. Set for everything.Not to drift the thread but I personally think an all shotgun match (since it is all about the shotgun) should have tubes plugged at the 8 rd limit. What say you? Kind of like the single stack classic but with shotguns Edited August 22, 2013 by APL-G35 Link to comment Share on other sites More sharing options...
Shooter115 Posted August 23, 2013 Share Posted August 23, 2013 Is not Blue Ridge the only 8 rounds max in the tube match left? Task Force Dagger as well. I personally like having the different match rules. I use a 10 rd tube and always carry a plug that limits it to 8 rds. Set for everything. Not to drift the thread but I personally think an all shotgun match (since it is all about the shotgun) should have tubes plugged at the 8 rd limit. What say you? I think just you should have an 8 round limit.......wait, expand that to your kids as well Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted August 25, 2013 Share Posted August 25, 2013 Recently I installed the Nordic extension on my Versamax Tactical shotgun to give it an total capacity of 12 + 1. Additionally I have in my range bag the parts to change it to a 10 + 1 capacity, or an 8 + 1 capacity if the need arises. First question - I assume that changing capacity on a shotgun while at a match is no different than changing chokes and since you're using the same gun the whole time... it won't change your division/etc. Is that accurate? Second question - Is there a reason to have an extension that holds an odd number of shells? Such as a 9 +1 or an 11 +1? If the new generally accepted loading method is either by 2's or 4's, then how does an odd numbered extension fit into the plan? 1. No 2. 9 round tube allow you to run 9 in the tube on an empty chamber start. But you're better off just getting a 10 or even better a 12. I quit shooting matches that limit your shotgun to 8 rounds. It makes the stage strategy more restrictive which limits creativity. Link to comment Share on other sites More sharing options...
Rookie Posted August 26, 2013 Share Posted August 26, 2013 Rule 4.4 of the SMM3G Rule set describes firearm modifications that are prohibited during the match. You have lots of options for setting up your rifle/handgun/shotgun before you start your first stage. Link to comment Share on other sites More sharing options...
Moltke Posted August 26, 2013 Author Share Posted August 26, 2013 Thanks for the replies everyone, another shotgun question here. http://www.brianenos.com/forums/index.php?showtopic=180474 Link to comment Share on other sites More sharing options...
P.E. Kelley Posted August 26, 2013 Share Posted August 26, 2013 Is not Blue Ridge the only 8 rounds max in the tube match left? Task Force Dagger as well. I personally like having the different match rules. I use a 10 rd tube and always carry a plug that limits it to 8 rds. Set for everything. Not to drift the thread but I personally think an all shotgun match (since it is all about the shotgun) should have tubes plugged at the 8 rd limit. What say you? NO...NO...NO!!! 8+1 to start then let 'er rip. IPSC has run that way for years and it works and it is more fun and as Jesse said allows for more creativity. Link to comment Share on other sites More sharing options...
MarkCO Posted August 26, 2013 Share Posted August 26, 2013 Payne's limited to 8 max in tube, chamber always empty at start, everyone else 8+1 and unlimited after start...works for me. Link to comment Share on other sites More sharing options...
Brian Payne Posted August 26, 2013 Share Posted August 26, 2013 Bunch of hunyackers I say. It was just a bored guys thought while drinking a cup of coffee. I didn't say it was a good thought. Back to the thread. Link to comment Share on other sites More sharing options...
P.E. Kelley Posted August 26, 2013 Share Posted August 26, 2013 It really comes down to...does it improve the shooters experience? Running events is just like any other business. Happy customers are return customers. Limiting capacities, or at least the talk of has yet to make more shooters MORE happy. Some maybe...more..I think not. On the other hand...every match has its own flavor and as a business catering to the local shooters may work, unless you what that business to expand outside of the local area. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now