DustyW Posted December 24, 2010 Share Posted December 24, 2010 (edited) Just got my M&P Pro recently. I checked the trigger pull weight on a Lyman digital pull scale and with 3 pulls it averaged 6lbs 11 oz. Smith and Wesson advertises 4-5.5 lb trigger pull. Is it normal for the pro triggers to be that much heavier? Should I send it back or just have some trigger work done on it? Thanks for your time. Edited December 24, 2010 by DustyW Link to comment Share on other sites More sharing options...
G-ManBart Posted December 24, 2010 Share Posted December 24, 2010 Just got my M&P Pro recently. I checked the trigger pull weight on a Lyman digital pull scale and with 3 pulls it averaged 6lbs 11 oz. Smith and Wesson advertises 4-5.5 lb trigger pull. Is it normal for the pro triggers to be that much heavier? Should I send it back or just have some trigger work done on it? Thanks for your time. I don't recall exactly what mine did on my gauge (same as yours), but it was also over what Smith suggests. Some of that, I think, is that guns like Glocks and M&Ps seem to vary based upon where the gauge contacts the trigger. I will say that I dropped in an Apex sear, rounded the firing pin block plunger, and clipped a few coils off the FP plunger spring, and it's about 3lbs now (going off memory). I have, but haven't installed the Apex springs, which I felt on a friend's M&P...it was lighter than mine by maybe another half pound...pretty nice really. R, Link to comment Share on other sites More sharing options...
dcarter Posted December 24, 2010 Share Posted December 24, 2010 I was under the impression that stock was around 6 lbs. I have mine at 3 lbs which works just fine for me. I have felt an M&P with a 1 1/2 pound trigger and I gotta say it worried me a little. The one thing that is real nice about the M&P is that the trigger work is so easy to do. Link to comment Share on other sites More sharing options...
mike cyrwus Posted December 24, 2010 Share Posted December 24, 2010 My bet is that you arent pulling the trigger back properly. You have to pull down a little when you get the take-up out of the trigger. If you pull too parallel with the bore initially, you can get the articulated trigger to hitch a little bit and skew your trigger pull reading. Link to comment Share on other sites More sharing options...
Greg Thomas Posted December 24, 2010 Share Posted December 24, 2010 I had the same problem with my new 40 Pro 5" [6.75 lbs] i tried the apex competition kit that i had bought for my wife's 9mm pro but it only dropped the pull down to 3.5 lbs but on the 9mm pro it was like 2.75 lbs the only difference between the guns is the 9mm pro has about 3000 rounds thru it where the 40 pro has had 21 rounds thru it,also the new 40 pro has the bigger sear spring. I was going to send it to S&W to have it fixed but got ahold of Dan Burwell and he said that he could get it in so i sent it to him. Now my only problem is trying to wait patiently!!! Link to comment Share on other sites More sharing options...
mpeltier Posted December 24, 2010 Share Posted December 24, 2010 To answer your question, I would just do a burwell or apex trigger job and call it a day. The pro triggers are typicaly better than non pro triggers, but not near what a real good m&p trigger can be. Link to comment Share on other sites More sharing options...
want2race Posted December 24, 2010 Share Posted December 24, 2010 Or you could trigger pull test it like John Scouten and pull the trigger back a little, then place the trigger gauge bar at the very tip of the trigger. He used the trigger guard. The trigger gauge finger was placed between the trigger and the trigger guard, this way the guage was at the very bottom of the trigger which increases the leverage substantially, thus lowering your number, increasing the WOW factor at how low the trigger pull is on the guage. My jaw hit the floor when I saw him do that. I wasn't surprised his pull weight was very low considering. Testing my M&P the way he did and mine was 1.75#. Tesing it the correct way (in the middle of the trigger where your finger would be) and it's 2.25#. Link to comment Share on other sites More sharing options...
DustyW Posted December 24, 2010 Author Share Posted December 24, 2010 Thanks for the replies guys. I might try that trigger job on Mr. Burwell's website. After that, I'll probably be ordering Apex parts! Link to comment Share on other sites More sharing options...
mike cyrwus Posted December 25, 2010 Share Posted December 25, 2010 Or you could trigger pull test it like John Scouten and pull the trigger back a little, then place the trigger gauge bar at the very tip of the trigger. He used the trigger guard. The trigger gauge finger was placed between the trigger and the trigger guard, this way the guage was at the very bottom of the trigger which increases the leverage substantially, thus lowering your number, increasing the WOW factor at how low the trigger pull is on the guage. My jaw hit the floor when I saw him do that. I wasn't surprised his pull weight was very low considering. Testing my M&P the way he did and mine was 1.75#. Tesing it the correct way (in the middle of the trigger where your finger would be) and it's 2.25#. I saw a certain aftermarket glock trigger guy at a major match and he told me that was the proper way to read the poundage on a glock trigger, right at the break point.. I was like ok, gee whiz,thanks Mister; Ill bet you sell a ton of em! Link to comment Share on other sites More sharing options...
G-ManBart Posted December 25, 2010 Share Posted December 25, 2010 Thanks for the replies guys. I might try that trigger job on Mr. Burwell's website. After that, I'll probably be ordering Apex parts! FWIW, dropping in the Apex parts is a lot easier...especially the sear, which requires no work. R, Link to comment Share on other sites More sharing options...
beastfrog Posted December 25, 2010 Share Posted December 25, 2010 The newer pro's have the MA sear block, hence a stronger sear spring. I think the marketing has not caught up to the manufacturing realities yet. Apex sear and polish job will help. Link to comment Share on other sites More sharing options...
DustyW Posted December 25, 2010 Author Share Posted December 25, 2010 Yeah, my Pro is pretty new. I suspected that larger sear spring could be making it a little heavier. I'll check it again. I could have been pulling it wrong. I'd like to get it down to about 4 lbs. Link to comment Share on other sites More sharing options...
Skroggster Posted December 26, 2010 Share Posted December 26, 2010 Yeah, my Pro is pretty new. I suspected that larger sear spring could be making it a little heavier. I'll check it again. I could have been pulling it wrong. I'd like to get it down to about 4 lbs. Ya'll want a M&P Production gun with aporoximately 3 lbs? If you have at least some common sence you can do this yourself for $125.00 Follow the links for both items. Same site for both items. https://apextactical.com/store/product-info.php?pid35.html Link to comment Share on other sites More sharing options...
Skroggster Posted December 26, 2010 Share Posted December 26, 2010 Yeah, my Pro is pretty new. I suspected that larger sear spring could be making it a little heavier. I'll check it again. I could have been pulling it wrong. I'd like to get it down to about 4 lbs. Ya'll want a M&P Production gun with aporoximately 3 lbs? If you have at least some common sence you can do this yourself for $125.00 Follow the links for both items. Same site for both items. https://apextactical.com/store/product-info.php?pid35.html https://apextactical.com/store/product-info.php?pid36.html Link to comment Share on other sites More sharing options...
GSWEAR Posted December 26, 2010 Share Posted December 26, 2010 Yeah, my Pro is pretty new. I suspected that larger sear spring could be making it a little heavier. I'll check it again. I could have been pulling it wrong. I'd like to get it down to about 4 lbs. I have installed the Apex parts in a few M&P's and the results were pretty consistent on all of them. With the Apex sear and firing pin block or a modified FP block and stock springs they were 3 3/4lb and with comp springs they were 2 3/4lb. Link to comment Share on other sites More sharing options...
DustyW Posted December 26, 2010 Author Share Posted December 26, 2010 If I install the Apex Comp. Kit, are the springs still heavy enough to ignite all brands of primers, or do I need to stick to Federal? Link to comment Share on other sites More sharing options...
moto727 Posted December 27, 2010 Share Posted December 27, 2010 If I install the Apex Comp. Kit, are the springs still heavy enough to ignite all brands of primers, or do I need to stick to Federal? I have put roughly 1000 rounds through mine with a mix of Precision Delta, a lot of Georgia Arms, a lot of Atlanta Arms and some Federal Wal-Mart special without a problem. Link to comment Share on other sites More sharing options...
RH45 Posted December 27, 2010 Share Posted December 27, 2010 (edited) If I install the Apex Comp. Kit, are the springs still heavy enough to ignite all brands of primers, or do I need to stick to Federal? Even though I usually run Federals for production loads because I used to run Glocks, I loaded and shot several hundred with CCI primers and they all fired in my Pro with tha Apex competition kit. Edited December 27, 2010 by RH45 Link to comment Share on other sites More sharing options...
GSWEAR Posted December 28, 2010 Share Posted December 28, 2010 I've shot thousands thru mine with CCI primers and have had no issues useing the Apex comp springs. Link to comment Share on other sites More sharing options...
Bongo Boy Posted January 2, 2011 Share Posted January 2, 2011 If I install the Apex Comp. Kit, are the springs still heavy enough to ignite all brands of primers, or do I need to stick to Federal?I've never heard anyone suggest Federals were the easiest to light up, and in fact I thought they were sort of the acid test (well, short of Wolfs). Did I get it wrong? I've never used Federals, so I don't know or have an opinion--I just somehow got the impression they were thick-skinned compared to others such as CCI or Winchester.Anyway, I'm very curious about how much influence the striker spring has on trigger weight. Intuition (well, mine anyway) would suggest not a whole lot, but I wonder if anyone has actually measured trigger pull with all things equal except the striker spring (stock vs Apex Competition). Link to comment Share on other sites More sharing options...
twodownzero Posted January 2, 2011 Share Posted January 2, 2011 Federals are definitely the softest primers on the market. They are the "acid test" because they are the softest. That's why nearly every revolver shooter uses federal exclusively. Link to comment Share on other sites More sharing options...
want2race Posted January 2, 2011 Share Posted January 2, 2011 The "light" striker spring that comes with the Apex kit is not like a Glock light striker spring. The Apex spring is a good 4 coils longer than the stock M&P spring. I tested trigger pull weight with and without an unmodified Apex striker spring. The difference in pull weight was so slight that it really didn't benefit using it. However, I took the 4 coils off to match the stock length and then it dropped the trigger pull weight a whole half pound. .5lbs. If you're worried getting light strikes, leave the stock spring in and use the rest of the Apex kit. Most people can't tell a half pound difference with their finger anyway. Link to comment Share on other sites More sharing options...
The_Vigilante Posted January 2, 2011 Share Posted January 2, 2011 I just got my .40 Pro back from Dan Burwell. Had him do the regular trigger job and reduce the pre-travel. He did a great job as far as what I authorized. However, the reset leaves something to be desired-it is a faint click and one could easily miss it if they weren't looking for it. Why did S&W design them like that? Is it all Pro's or just some? What is the solution for improving the reset? Thanks Link to comment Share on other sites More sharing options...
ghertz Posted January 3, 2011 Share Posted January 3, 2011 Apex R.A.M will make your reset a lot more positive Link to comment Share on other sites More sharing options...
4string Posted January 18, 2011 Share Posted January 18, 2011 Here are the readings I took from my Pro. I have about 1500 rounds through it. Bone stock no alterations. Lbs-Ozs 5-8, 5-10.5, 5-13, 5-6, 5-14, 5-11.5 For an IPSC production gun I am as close to the 5 lb line as I want to be Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now