Ajsomp

If you are set/stuck with a k sized footprint. There’s really no reason not to get the EPS (either variant). I wouldn’t necessarily run out to replace every 507/407k I had, but I wouldn’t buy a new one. The enclosed nature of the sight honestly to me doesn’t matter for the rain as much as it does the ability to keep stuff out of the optic itself and clean your glass when needed.

Those are the ones you should be throwing in - work in every basepad I’ve tried

I tried out the comp the other weekend at a match where a guy had one on his glock. We compared it to my SRO in the Florida sun - honestly no real difference in brightness to my eyes. I have found that the 5 Moa sro dots look the best to me - not saying the 2 Moa dot isn’t useable for the holosun but I don’t see a reason to switch. If they come out with a dot only version cheaper, with say a 6 Moa dot I think it would be a no brainer

I always get Wolff springs. Cheap and readily available

If you haven’t already, look at the Zev duty slides. I run them with my sro’s and they are the lowest I’ve seen, previously my slides were cut by jagerwerks and atei

I compete with a gen 3 Glock 17 and sro, and I carry a gen 3 Glock 17 and sro. Identical set ups, my carry gun is lower round count and not used for practice sessions, but serves as a match back up gun. I have a 19/Rmr combo at home, but that’s really more for my wife than me. The only thing I may change in the future is carrying with an aimpoint acro or Steiner MPS. I snagged a brownells acro slide and had my original Glock slide with internals sitting around to throw into it. I love the SRO but it collects a bunch of dust and dirt in the window

Kenton makes the best triggers for Glock hands down. He’s got them for p320 too but I haven’t any experience. I have had 6 of the Glock triggers though, won’t put anything else in.

.

I’m super interested in this. Might just have to take the jump since I have a ton of Glock magazines anyway

If possible I prefer my optic as far back as possible. I’m also a fan of irons forward (if you find them necessary) for a few reasons. That being said, I have slides that are cut really low (zev duty slide for example) and when paired with an SRO, the glass get pretty dirty after a relatively low round count session (2-300 rounds). Nothing a cheap lens pen can’t fix but I’ve noticed that if my optic is further back I don’t have to clean it nearly as frequently. tracking the dot makes no difference in either position in my experience.

How could you tell which spring weight it shipped with? If they changed it that would be interesting but haven’t seen anything on that

I honestly only sold my 1 Moa version because I like the 5 Moa better. I got the 1 Moa at a good price but it just wasn’t my favorite. The 5 Moa dot is cleaner in my opinion and it doesn’t bloom. But trying to find 5 Moa in stock anywhere is crazy

I was looking at the EGW kit with a red dirt trigger to start. I heard mixed reviews about the infinity kit, which could be an option, but I might steer clear for now. After that it’s a dot and more magazines.

I shoot my gen 3 17 /sro for CO and carry the same. I’ll occasionally swap in my 19/Rmr. I may swap to a gen 5 17 or 19 with EPS to give closed emitters a long term shot but I’ll need a thousand or so rounds through the set up first.

Much thanks. I had a notification from Primary arms for in stock and could order fast enough. Was about $25 cheaper with my discount but beggars can’t be choosers

That’s some cool stuff. Now if I can find one in stock

I mean you see Walther doing it with their dynamic performance trigger and those are night and day compared to factory. For this being the top competitor model, it would be great to see a similar Canik version

I’d be curious if all the issues are with the black versions, that’s the one I’ve got

They do include three grip sizes. Not sure the one the owner had on, but even so I haven’t had an issue with thumb placement. I also don’t really use the memory pad for my support thumb though either.

I was able to narrow it and look at the relation of the magazine and the slide lock. For me, it’s not an issue of the RSA or weight, it’s the slight gap from where the baseplate reaches the bottom of the magwell that allows it to be inserted just enough to cause an issue. I pulled the magazine just slightly back out and the slide went forward. That tells me either it’s either the magazine or the gun- but I’m leaning towards the gun if other people are experiencing it.

Also, I threw in a 15# spring and it’s been great so far. The gun tracks pretty reliably as long as I do my part. Shooting 124 factory loads- I think it’s belom?

Yeah they are sending me more, that apparently are coming from Turkey. I need to inquire about the actual grips themselves because they are only getting me screws at the moment.

I have the same issues. It seemed to resolve itself after 1000 rounds. To me it seems like the magazines are able to over insert and push against the slide stop. I don’t know if it’s fully resolved, but I had no issues as I approached 1000 rounds today on the range. I had lots of intermittent issues in the first 500.

Just putting my .02 in. Whoever designed the grip panels on the S needs to be fired. The only holes that aligned out the box was the small grip. When I tried to put the medium on I couldn’t get the threads to align and ended up only getting it partially in. Lost two screws on the first range session. Canik tells me it’s unknown how long it will take to get them in because they have to clear customs. also, I noticed that when using the stock magazines without the magwell, I could overinsert the magazine to the point where the slide would not release forward. It took about 1000 rounds and several manual cycles of the slide to get it not lock to the rear randomly. it does track really well and the weight certainly makes it easy for consistent accuracy. But there’s a lot of take up in the trigger, so I suppose I’ll look at the freedomsmith to fix that. overall I’m mixed on how I feel about the gun and my ability to perform with it. I wanted to love it, just not there yet.

Been running the black scorpion gear holster for the rival S and it’s been great, much like their other stuff. I’ve run their holsters for 2011s, sigs, and CZs.