RobE1010
-
Posts
151 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by RobE1010
-
The best sights for your Glock! They don't rust like so many others out there do, just the right amount of notch width in the rear, the fiber optic is super bright thanks to the stainless screw reflecting more light and the fiber optic is on top where it should be.
-
Go with the Blade-Tech OWB with a D/OS Tek-Lok attachment and never look back. Fast, durable and no one else in the biz supports the sports as much as Blade-Tech.
-
The TTI sights are the best ones out there, no question! True POA/POI, no worries about rusting like so many others out there, the rear sight has just the right amount of light for a proper sight picture, the fiber optic is super bright and it's at the top of the front sight where it should be.
-
You will be extremely happy if you do. I absolutely love my G34 w/RTS package! JUST DO IT!
-
Dupe
-
TTI is absolutely the way to go...20+1 in .40S&W and 23+1 in 9mm. Easy on and easy off, reliable, durable and available in many different colors. They are all I use and will use for Glock mags. I also hope to switch all my SPS and SV mags over to TTI basepads soon instead of Grams and Dawson.
-
^Pretty much this. The only difference for me would be #2 easier recoil management on what are becoming suffering hands and I might add another, #5 allows me to get more practice for 3Gun as well as forces me to focus more on a better hit %/reinforce calling shots due to Minor scoring.
-
After my TTI G34 gets here, I'll be adding a G41. Eventually I hope to pick up a G20 SF as well.
-
I'll be sure to post up pictures of mine as soon as it gets here within the next week or so. I have the Glock 34 RTS (Ready To Shred) coming myself, done to be USPSA Production & IDPA legal. I hope to be sending off a Glock 41 to TTI to have it tricked out too once I get a hold of one.
-
I have been told they have an IDPA legal Compwell in the works as well.
-
I kind of like the black for contrast against all the hard chrome. Maybe try the smaller GoGun Racer's Cut *thumb rest [generic]*?
-
As soon as I get mine, I'll be sure to post up a pic or two.
-
How very perceptive of you...
-
In case you have not seen it yet, the picture was released of Predator Tactical's brand new magwell design, the vision of Matt Burkett himself brought to life for use on the 2011 platform(s). The brand new Predator Tactical 2011 Burkett Compwell is currently scheduled for shipping on March 1, 2014. I understand there are also plans for an IDPA legal version as well. Looks absolutely amazing to me and IMHO, will be a very popular add-on for many for use in USPSA/IPSC and IDPA. I hope to have a couple myself! You've done it again, Matt!
-
Congrats! Sounds like its going to be a nice build.
-
I have competition guns with both KKM and Schuemann barrels, bushing and bull barrels respectively. Both shoot accurately and I have nothing negative to say about either. I think it all comes down to how well the gun is built and a proper barrel fitting by a competent gunsmith.
-
Another vote for TTI here
-
Nice carry piece, Ken!
-
Here is my last Limited/Lim10/ESP legal bushing build pre-assembly...
-
9mm Minor Load for Glock 34 and M&P 9L/Pro using TiteGroup
RobE1010 posted a topic in 9mm/38 Caliber
I am looking for any recommendations for 9mm Minor load recipes for use in USPSA Production, IDPA as well as Steel Challenge for both a Glock 34 and M&P 9L/Pro. I am looking for loads using TiteGroup powder as that's what I have on hand and prefer to use. Ideally I'd be looking for loads using 115gr, 124gr and 147gr projectiles and your current OAL. Thanks in advance for any help! -
The most beautiful Open gun? Well, that's a bit subjective but I would lean towards a Limcat or SV based purely on aesthetics. It just so happens they both also run great and will cost you an arm and a leg. And that's saying something based on Open gun pricing.
-
SPS 9/38S 170mm Mag Tubes- What parts do you use and how many do you g
RobE1010 replied to RobE1010's topic in Open Pistols
Good to know. Thanks all for the replies, gents. No worries, no hurt feelings or negativity perceived. I was just curious if anyone else was using them for match use and if so, what they were experiencing and capacity they were getting. I have had good experience with the SPS tubes I've been using in my Limited gun for the last few years with no problem. Otherwise, I currently have 1-170 and 3-140 SV tubes as well as 1-170 and 2-140 STI tubes reserved for my Open gun build. I plan to use TTI springs/followers/basepads for the SV tubes and Grams springs/followers and DP basepads for the STI tubes. I feel comfortable knowing I will get good capacity and reliability with those combos in either 9Major or 38S. -
I have a couple SPS 9/38S 170mm mag tubes that I got awhile ago and have yet to assemble them for Open use. I am curious what combination of springs, followers and base pads people are using with these mag tubes and the number of rounds they are getting in either 9Major or 38Super/38SC. What springs and/or followers are you using along with base pads to be legal length and for best reliability/capacity? I would prefer to use SV tubes but would like to give these a try for now as they wont cost me anything extra right now and I have them on hand. Thanks!
-
tt350z, That is one sexy looking tacticool rifle setup. What do you shoot with this rifle? How do you like the swing and feel of the 18" vs standard 20" or short 16" setup? Pros and cons? This rifle looks awesome but yet still practical for a reach out an touch em rifle. Great rifle!
-
I was curious to see pics of your competition/tacti-cool AR15 rifle setups. Please include pics if you have them and parts/acessories info. Show 'em off!