lroy

Limited optics has more prereg than every other division combined at the iron/low cap nationals. Lol

For as many shooters have SHTF builds, you hear an overwhelming amount of complaining when you require a slight bend at the knee for a low port.

I was using two separate loads for CO and PCC then got lazy and tried 147s in the jp5. It barely makes a sound and the dot wiggles slightly so I've stuck with it. Maybe I'm just not good enough to take advantage of a snappy 100gr load. I can still split 12-13s with 147s and it feels like a 22 so that's good enough for me.

Gyaaaatdamn

We use gorilla tape. It's strong as hell, but will require effort to get it off the floor afterwards. Also pretty expensive.

It's wild people are willing to wait a year for a cam lever. They're $5 on Amazon. Lol

My pic rail is tapped. Doesn’t seem to be an issue

Can’t you just tap the frame and put in a threaded barrel? Will the chamber handle 9 major?

I asked a GM that's been shooting uspsa for almost as long as I've been alive, what happened to all the more physical props that stages used to have. He told me all the guys that used to enjoy them got old. Lol

What's sticking with the mrh? I know the cheely grip is a bit different and takes slight modification of the holster to work well.

I've seen a good bit of them, maybe once per match. They do help to change things up, I think. The main thing I've learned since designing stages is that people will complain no matter what you do. Lol

Well s#!t. It looks like it is a mag issue. They run fine with oem glock mags. The TTI pads cause the issue throughout. I sanded the connection point and followers and load to 1.12. im not sure why round nose dont have this issue. I guess i could try the TF extensions?

im using a 70. My ejection is great, so i dont think that is the issue. It even happens when releasing the bolt to load.

Ive tried as short as 1.0 and long as 1.125. Im using the same oal as my BMB coated bullets that feed great. Its seems like the flat bit of the JHP is getting snagged or something? My coated projectiles have a round, pointy nose.

Anyone else have issues with jhp? Im using PD 115 v2 and they will not feed for anything. They consistantly end up stovepiping instead of chambering. Have to remove the mag and rack to clear it.

I've been thinking about some tuning methods for the rdb. I really doubt any of it matters in the end, but it's been fun to theorize. The way the system operates, the locking peice dictates how much initial force is required to drive the bolt assembly backward. The buffer spring/weight can add to this, but has the drawback of also causing additional force be created when it pushes forward back into battery. For example, a 70 degree lock with a heavy buffer spring would produce more felt recoil than a 60 degree with a very light buffer spring? Is that correct? I know max tested all of these and preferred the former, I was just curious on why that would be the case.

That's a bad lever, not a redi catch. I'm surprised that fits though. The clearance on the bolt release is very tight. It's help in place by a little E-Clip. It should just pop off with a bit of a tug. (The round part in this listing) https://www.jprifles.com/buy.php?item=JP5-MK

What else does the org spend money on? A magazine? They sure as s#!t don't help at a local level.

Even if it did, it accomplishes nothing. Now matches are point factor. What a waste of time.

Even if they had the best intentions, the optics of this is hilariously bad.

Is there anything similar to a bad lever/ redi catch that works with the jp ambi bolt release? https://www.redi-mag.com/product/redi-catch/ I'm new to PCC and it feels so awkward to lock the bolt bag to make ready/show clear.

The only way prod sees any interest, is if it becomes carry irons. That or leave it alone and just stack it with revolver and all the other divisions no one shoots

looks like around 500

The new holosun aems max looks like a gameboy mounted to the pic rail

What? Theres nothing on the JP site that mentions a pro package kit to drop trigger weight.