Paulie

Searched around for this topic and was surprised it hadn’t been covered lately. Also got a million unrelated results because “major” and “match” pop up from time to time here! Title says it all. I’m gearing up for my first major match. I’ve only been able to shoot 4 stage indoor matches so a Level II brings a host of unknowns, mostly related to logistics and the Chrono stage. How does the chrono “stage” even work? I give RO a mag or they choose? How many rounds will they shoot? I just don’t want to embarrass myself do anything that makes me look like I’m gaming it. Supplies- what are things that someone who shoots one hour indoor matches would forget or have no idea about relating to an all day affair? Weather should be in 70 range but it could rain I guess. Other miscellaneous advice? Thanks in advance.

Indeed. Just ran 100 without any double case feeds. However, every 10th case is still hanging on the way into sizing die. Need to try ideas here and tinker some more on that front.

Well, guys....there is a saying “start with the most likely / simplest fix”. Almost embarrassed to report this. Concerning the double feeds- the colored end to the case feeder tube had just popped out of place a little bit. I removed the plastic feeder tube all together, added back the colored end (pinkish for 40), reinserted into place atop the machine, clipped to case feeder and now the double feeds are no more!

Good idea. Will try and report back. Thanks, Sarge.

I called on #2 and they said to adjust the camming pin. The one that impacts the triangular case insert slide. I just don’t know how that helps a shell that is pushed all the way into place on shell plate and then gets misaligned on way up.

So I’ve had about 7k flawless trouble free rounds of 40 out of my 650 with Dillon dies. Now that I need to ramp up production for some level II’s and stock up for winter, it’s flaking out on me on station 1... 1) It is dropping two cases almost every time. One makes it into shell plate and a second case is sitting (leaning really) right side up on top of it. 2) About 20% are getting caught on lip of the resizing die. I’ve crunched a few....am able to reach around and pull it snug toward center of shell plate and re-insert. The strange thing it it seems to be snug when placed into position, so it apparently shimmy’s out a few mm on way up. Tighten shell plate? Tried search function already. I’m still a rookie reloader so I hesitate to start adjusting a bunch of things. Help on on one or both issues is greatly appreciated!!!

Is your resizing die going down far enough? I shoot lots of “once fired” 40 brass, which is probably coming from police ranges full of Glocks (complete with their bulges). None the less, it runs almost 100% thru my hundo XL and Titan.

Thanks.

You running a titan? Similar load recipe?

Guys, how many FPS did each grain get you as you dialed the load in? I just ran a new 180 gr precison delta JHP load to 866 FPS on 4.9 gr of n320 out of my titan loaded to 1.185 COL. Do I need to be at 5.1 or 5.2 to get to 940 FPS / 169 PF? Caveat- I was very close to my Chrono. Would that impact results? Thought 4.9 would be closer to MPF. Could crimp also be a culprit? If so, please elaborate on how to measure the right level.

The benefit of the hundo gauge is time. I can take handfuls of ammo and sort of angle it in...probably saves me 10-15 minutes per session vs a single or using the chamber. I devote a ton of time to this sport so almost any time saver is “worth it” to me. YMMV!

Moving spare parts kit to “priority upgrade” bucket due to personal experience. My necessity bucket is comprised of safety related items but after that, grab the spare parts kit for sure! Hat tip to PPGMD. FPNI as usual...

I’ll probably update that thread! The other day I had a brass position pin fall on the floor and disappear. Pulled out the spare parts kit to keep running. Subsequently found the pin but it hid from me to be sure!

I’m right handed and left eye dominant. Maybe I’d be better if I was right eye dominant but I’ve never even once considered switching hands. Have no problem with double vision or seeing recoil so I just assume it’s not a substantial disadvantage.

LOL

How much time did you save by switching back to dry? In my mind the only extra Steps are: - put wet cases in FA dryer - dispose of dirty water

I average 30 min of dry fire a day, so the bells and whistles are definitely worth $9 to me. Makes DF more enjoyable. YMMV.

Good luck!

I like “dry fire timer”. You can load in # of strings. app has classic target as logo on iTunes.

Welcome! Be sure to check out local clubs on practiscore. Obviously Quantico has one. Also Fredericksburg rod and gun, southern Maryland practical shooters, etc.

Just stopping in to say that the FART may be the best invention since yoga pants. I used pins and five caps of the FA special sauce. The stuff glimmers like buffed jewelry. It’s mesmerizing. Ran a load of half dirty and half mulligan....some I used a home-brew detergent cocktail on last time to less than acceptable results. Now it’s all shiny / better than new. Get the FART, FA cleaning solution, magnet and their branded dryer. It all works well.

I have benefited from those excercises that Chad Riley / absolute PT demonstrates below. Increased strength and no more tennis elbow! In order to do the excercises more frequently, I purchased one of these sidewinder pro extreme grip devices. It allows me to get some reps in during conference calls at work. https://www.sportgrips.com/product/pro-xtreme-3

Get the mags from Atlas. Great deal.

You can’t go wrong with either of those top shelf builders. The weakpoints in a limited gun system are the mags, hand loads and person holding the gun! I only have experience with Atlas (40 Tian) but it has been 100% positive. The gun has been flawless and Adam helped me out a lot. Never seen better customer service.

What are your range limitations (if any)?