Fo0

how much comp is needed for a 16" 9mm

MBX says their buffer can work with 9mm 40s&w and 45acp - can also get 3 different internal springs

i changed the yellow buffer spring to the JP rifles 308 Tuned and Polished Buffer Spring, 308 Carbine - much smother

has anyone tried to put the rifle length spacer in a carbine buffer tube to short stroke

has anyone tried the [NERD] NC NANO 9mm Brake - it has one up port. 1/2×28 and 1/2×36. weight is 1.84 ounces

my CZ hammer disco hole is definitely smaller than my Tanfoglio Unica hammer but the BOLO in the CZ hammer - the pin slides in and out - no hammer - just push in and push out. The BOLO in the Unica the pin moves around a little.

I use MBX buffer with blue spring and JP rifles 308 Tuned and Polished Buffer Spring, 308 Carbine

I use Wolff 18lb mainspring and Wolff Variable Power Recoil Spring 12lb for 40s&w

are fliers a problem with 115gr or any problems is there a shorter bearing surface

That is the Brass Top one?

I had CGW put my hammer strut in the hammer as I had trouble with the pin also

cgw recommends their starter punch $7.00

and the safety/grip pin and spring

your first two links are the same - also they are for mp5 magazines and no mp5 mag offer LRBHO

I would try angst arms @ $224 for stripped lower

I got a QC10 lower that looks blue. This wasn't purchased as 'blemished'. I bought this as upper lower set

no fitting required for the bolo into the cgw hammer. fit perfectly. I haven't put it in the gun to fit it to the trigger bar yet.

What color are the islercustom carbon fiber handguards - on their website some of them look bronze/brown also, it doesn't list any weights

2011 has more support but for what I am trying to build parts are out of stock or on pre-order. with what doesn't come with EAA Gold Team there are aftermarket support and I am close to Patriot Defense

Either will be 38 super comp Either with cmore slide ride 2011 I was wanting to try the KKM 5" hybrid threaded barrel EAA Gold Team I was wanting to use the minor pf barrel and drill out the second port on the comp and the four pre-drilled holes in the comp and no barrel ports I have a 2011 open gun in 9mm but I want to try a 38 sc gun - Never shot a Tanfoglio. Not worried about the backup gun complications at this point Thanks

what slides are yall using

"draining batteries when powered off" had a replacement in exactly one month with Christmas and New Years in between. If anyone has no use of their romeo3 low Picatinny mount I would be interested in it to put it on my Vepr 12 - PM me or respond here if willing. Thanks

evil hand makes one knock-off of go gun usa