Face5535

Deleted

Dillon... Carbide 9mm.

Rounds are spinning fine... Crimp is: .372 or so

How do I do this?

No because I’ve shot over 3k of this same round during the same session of reloading ... and I have no issues in my other guns. The only pistol/pistols I am having an issue with is my G19, and a factory G17 that I a friend brought over today. Not a single issue outside of the Glocks... So It’s not the barrel, it’s not the gun, its not the aftermarket parts... It’s just this ammo... in a Glock. Which it’s totally bizarre. If it shot perfect out of the 17, I’d say it was the gun. If the ammo was an issue in my 1911’s, P210, or my P30, I’d say it was my reloads. The only thing left is factory ammo out of my Glock... and the that rules out the gun completely. As mentioned when mic-info my reloads vs factory, the crimp is a a bit off. **As for primers, I’ve used CCI, ,Winchester, Tula...

I’m using a 1050, no re-firing doesn’t set them off. Just seems odd that not a single issue out of any of my pistols. I no longer have the factory barrel...

Hi Enos, looking for some thoughts on reloads in my G19 gen4. Ive been struggling with figuring out what the issue is on my pistol. It’s all hyped up with the typical fan boy mods... stipple, milling, trigger, etc... Ive been getting light primer strikes. At first I thought it was the striker spring, so I went from 4lb to 4.5lb and now to factory. It seems as though the issue was only happening when I was using a mag with a +3 or more TT extension. Makes no sense but, it’s what I could see as the common denominator. i am shooting reloads (pistol has a lantac barrel)... I didn’t think the ammo was an issue as I haven’t had any issues shooting this ammo out off my 1911’s, P210, or P30... all shoot my loads flawlessly with zero issues or malfunctions. Today, I was shooting a G17 all factory and the exact same thing happened (yes using my ammo). This threw me for a major loop so I took a look at my reloads. Everything is fine in terms of load and OAL, but the crimp was a bit much. Since the 9mm sits on the case neck, could the round be going into the chamber a few thousandths to far causing firing pin not to actually reach it on a round every once in a while? i wasn’t sure if I should ask this here or in the reloading section. Anyway, trying to get this thing running properly, and trying to narrow down any and all potential issues. all thoughts here would be appreciated.

I finally got mine! Really like it. There is a little bit of “tuning” I still need to get straight, but I am super happy with mine!

I’ll have mine on Tuesday!

This was the spread I put out a few years back for the super bowl.

Call Dillon, get a quick swap for the 650 and sell the 550... ha:)

What was the average wait time? I am at about 2 weeks maybe 2 and a half.

Sorry misread that. I took it as AB had sent yours out in less than a week. I hate waiting as well... it’s been a week and a half. Have not heard a thing yet. Hopefully soon!

“unfortunately” ?

Nice man!! How long has it been?!! I’m sitting at a few weeks now.

Yeah, I totally agree

I think that you should roll with the 750. I love my 1050 but with that many calibers, you can probably buy 2 750’s for what you are going to spend on the 1050 with that many caliber conversions and tool heads.

Are Karl and Ammo Mikes MBF the same design? I’m on Karls page, but have not seen the ammo Mikes version...

That’s awesome! I haven’t gotten a ship date yet either...

Yes I have a friend who has been a big advocate of the 507C for a while now!

I have not changed over from my 650 to 750 and see no reason to. All that has happened is Dillon has taken the priming system off the 550 and put it on the 650, which gives you the 750. I am not sure I care for the priming system on either the 550 or 650 compared to the 1050 (which I also own). I will say this, Its much easier to change the priming system on the 550 vs old 650. Additionally, you no longer have missed primers advancing on a daisy wheel like before on the 650. Outside of that, I see no real reason to give it much thought. If you have a 650, keep loading... if you are buying a new press, you will buy the 750.

RMR or Holosun is where I’d place my bet.

I already don’t shoot my Glock’s particularly well... I think that of you are already using the Dawson sights and having no major issues, why change? ive personally found that the Trojans HDR work for me... but again, I wouldn’t change if Dawson sights are what you are used to.

It’s not just on the 650... at least for me. I have some jerking on my 1050 as well. Also, I don’t think it’s just on wet tumbles brass... I also have some sticking with Cobb polished brass as well... Case lube seems to help a lot;)