vixty

Hold the hammer back pull the trigger and push on the fp with a punch or something and see if you feel the fp rubbing on the fpb. I always trim my fp spring as it is a little excessive. I only do that because if you look at how a cz is set up it makes you wonder who designed the massive tanfo fp spring.

Still need to add grip take to it but here she is fresh out of the box from PFI. 80/20 burnt bronze/graphite black

I dont think it is. All i know is i had to break down my friends extreme that he just got and had to polish everything as if it was stock internals.

the black one is just as good once polished. Go the cheaper route and you wont be disappointed. The chromed parts are mostly for those that shoot ipsc and aren't allowed to polish their parts.

im surprised its not sold out. Do yall think using practiscore and not matchsignup hurt registration?

a shoot n see target will also help a lot

And small eggs are less than large eggs. .40 180 grain - same bullet I have listed for the others: http://www.acmebullet.com/bullets-reloading-brass/40-10MM-Lead-Hard-Cast-Bullets/40-10MM-180FP-NLG-Coated 2k case @ $185+$12 shipping = $197 -> 9.85 cents each Less than Xtreme but more than Blue.... actually, use the enos10 discount and its $178.50 for a 2k case of 180's

ACME 147S ARE .07 CENTS EACH PER CASE WITH THE ENOS DISCOUNT

I'm currently in the process of figuring out which steel frame gun I shoot the best. I do like how I can point my 85 combat faster than my shadow and s2 but I like how the shadow fits my hand better and how the S2 shoots flatter. At the end of the day I enjoy shooting different gun but I really need to figure out what will work the best for me. I mostly like the CZ's because I don't have the break my grip to release the mag. Plus my shadow had a 4lb DA and 1.75lb SA.

I Shoot acme 147FP 3.1 TG 1.125 130-134 PF (60 degrees) in my shadow/ combat/ stock 2 I may have to bump down to 3.0 once it starts getting hot because I think TG will get hotter with higher temps.

I use a 15-45 spotting scope but they also come in 20-60. Mines a old burris landmark I believe

Mine never would communicate with my phone. Hence the reason I have a pro crono now with the bluetooth

I like the stiffer springs in the mecgars

2.7tg 1.150 130pf out of my shadow

Yes

The wing is for DA. If OP is having DA and SA, the fitting of a t3 is the same across the board. If the SA trigger doesn't reset, filing the wing will do nothing; OP needs to hit the wedge. Sorry I didn't read the op correctly. There's nothing you can do about the da pretravel that's production legal.

Lol

MOTO I've thought about making a setup in the backyard but I'm always afraid the neighbors are going to freak out seeing me run around with a gun all the time.

just as it reads

Fitting a T3 on a Tanfo is different than a CZ. Most do not need to reduce the wedge as pictured above. Most only need to remove metal from the bottom of the wing until the hammer will fall in DA. If you have a 2 piece sear than you have to remove metal from the top side of the wing as well.

So since its keeping the stock 1 name its automatically production legal correct?

The only thing they have going for them over the stock is the cool colors. Comes with 1 piece sear Erics firing pin Extreme trigger which makes the trigger reach really far. Still needs a full trigger polish and snipping of springs. All silver internals which don't mean anything because they all need polished anyways which makes them a waste. My friends trigger failed to reset after about 20 rounds mecgar mags are better the eaa mags and the egd basebads req a hex to take them off. ( a pain IMHO) Theres some more but its a waste to even talk about it.

I did that as well but the pro crono has more features but sucks at picking up 223 which is mostly what I shoot

You can do all the work yourself and get mecgar mags with henning basepads for less. Then pay 125 to get it cerakote the same

The egd basepads require a hex to take them off. A waste imho