kneelingatlas

I ordered some bullets Thursday and they were on my doorstep tonight!

Talk to Eddie Gunks http://www.brianenos.com/forums/index.php?showuser=40201 I think he casts them. He sent me a sample and they were great!

That's what I keep telling my wife! Although I now have a safe full of competition guns; the problem is that I fall in love and don't want to sell any of them.

I load Xtreme plated 125s out to 1.165" without hitting the rifling.

The TS trigger is in a class all it's own, even when compared to other CZs.

TS on all counts, which is why it costs twice as much

When I was shooting Olympic pistol I used a lighter to soot the front sight.

Plunk test them in the barrel first, I'll bet you run into the rifling before they catch in the mags.

I have yet to load so long as to hang up a round in the mag and I have gone 1.165" in both my TS and my small frame Tanfo, I'm limited my the chamber in both.

See Appendix D4 22.4: front to back beveling up to a quarter inch is permitted.

Yes it will. I already put a set Hogues on it. My CZ 75 mags fit perfectly, but Tanfoglio are a little off.

The grip is a hair bigger than the Shadow, but it has an alloy frame which is much lighter.

I think it has the potential to be a real shooter. Not hard chrome, Darth Vader black!

Will do, I've got so many pistols in pieces right now I should get some back together before I tear into another.

You might want to try selling your top end first, then buying a slide with the cut you want.

Arms list

You should call. Probably traditional rifling.

WANT in .40Easy, I could help

I did it with my TS and it put them all in the ten ring with both calibers. The breech face is .5mm bigger on the extractor side so the extractor doesn't have the same spring tension, but I didn't have any issues. Over thousands of rounds I would expect the extractor to wear out and cause problems, but what the hell?!?

I just picked up a T120 and it's great!!! As tightly fit as my Shadow, although the checkering on the front and rear of the frame is not so sharp. It does have a FPB.

9mm barrel, 9mm mags, 10mm slide, give it a try, I've done it plenty with no malfunctions, although 9mm from a 10mm mag pukes on the last few rounds.

I would assume the slide is just as hard as the frame. Do you have a mill? I've been fitting a large frame barrel to my Jericho 941 (don't ask me why...) and the slide on that one is VERY HARD too!

I have an out of state FFL that will do SSEs for CZs, I'm sure he can be talked into doing it for Tanfos too PM me for details. A Tanfoglio with a six inch barrel is only 10 1/4" long overall, the SSE requires 10 1/2" overall, so I made my own barrel and I've been using the hell out of it!

Yes it did:

My thoughts exactly