HOGRIDER

Just starting my path into the USPSA Production Class. My plan is to purchase a holster/belt/mag holder combo along with some extra magazines. And I definitely don't want to use/abuse the stock gold mag base pads. So, at this point, I looking for mag and base pad recommendations along with a beginner's holster combo that won't be unnecessarily expensive. Thanks for any recommendations!

Started getting involved in a local USPSA sanctioned range, and I've developed a very strong interest in trying out Production Class! Having been strictly dedicated to 9mm 1911/2011 platform, I've ordered a CZ Shadow 2 Orange as this platform has been dominating the 2020 USPSA National Production Equipment Survey! I also had the opportunity to handle a couple of competitor's CZs. A Shadow 2 OR and a S/A TacSport2. And I have to say both of these pistols felt GREAT in my hands! I was so impressed, I ordered the S2 Orange a couple of days later! So now, I'll be starting that journey of developing a new load that shoots ACCURATELY from this new-to-me platform. Referring to the same 2020 Equipment Survey, I see that 147g is the preferred bullet along with Titegroup and N320 coming in as #1 and #2 in powders used. And Blue Bullets is the #1 Bullet Manufacturer. I have long been a dedicated user of N320; however I do have several pounds of Titegroup. Plus I have a huge stockpile of Zero 147g JHP and sufficient stock of coated 147g Acme FP-NLG lead. As this is a completely new platform I'll be developing loads for, I would gladly welcome input from the experienced members here on what components I should seek, from my current stock, to allow me a direct path to developing an highly accurate load suitable for USPSA Production Class. And, IIRC, the CZ platform usually requires a much shorter OAL as compared to the 2011 STI platform? Thanks for listening to my long-winded request! Best Regards, Ben

Thanks Darrell!

Wooly: IMO, your on the right track! https://forums.brianenos.com/topic/288523-daa-powder-funnel-on-the-rl1100/?do=findComment&comment=3211870

On my 2019 Stac P, I'm running the Dawson Tool-less Guide Rod along with Dawson's assorted 3 pack of springs. Like Trace, I can't tell a whole lot of difference in the yellow or green springs with my standard reloads......

IMO, a beautiful example of PCPEMark's plating service!

For me, the standard sized MBF/PE expander works best with coated lead that's in the .3565-.357 diameter as stock size is close to .358-.3585". For my Zero JHP, I had the funnel turned to .3575" and that eliminated the sticking/popping issues. Those issues are totally due to "surface friction" of the funnel. Reduce it, and it inherently reduces/eliminates the funnel sticking in the brass. I also allow a bit of the One Shot lube to get into the mouth of the cases during coating........

Same experience...............IMO, if you compare the profile of the (9mm) SSI funnel to the MBF, the SSI profile is very similar to the stock XL650 funnel........... Once the MBF is "prepped" it provides a very stable seat for the bullet. My results with the Alpha funnel........(and yes, I use wet tumbled brass).............

This might offer an alternate............... https://forums.brianenos.com/topic/285234-lee-9mm-u-die-new-user-setup/?do=findComment&comment=3179600

I got this straight from EGW.................... https://forums.brianenos.com/topic/285234-lee-9mm-u-die-new-user-setup/?do=findComment&comment=3177062

Thank you Sir!

These work really well for those frames that may not be exactly to spec.............. https://www.egwguns.com/evolved-1911-sear-spring-2-pack

Your welcome! Glad to help!

The tablet is mounted to the Case Feed support arm using a Ram Mount. Almost identical to this one: https://www.markvii-loading.com/accessories/mark-7-spare-parts/101-1134-02.html

cb: After trying SEVERAL endoscopes, I ended up with this quality unit that features a great view and almost zero lag showing current views as the shellplate rotates: https://www.amazon.com/gp/product/B07QV83RSS/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 I use an old 10" Android tablet; however IMO, it also shows a great view using a cell phone...............

noylj: I'm still a bit confused on what's going on with YOUR converted version.......................if you want it in .xls format, just make a copy and change the saved file from .xlsx format to .xls! If all else fails, take Darrell up on his gracious offer to send you whatever format you may need! I for one truly appreciate Darrell's time and troubles for providing us such an extensive compilation of PROVEN load data!

More than a dozen individual pistol sheets showing in my file.............

Thanks Darrell!

My same setup along with the MBF, Everglades priming backer die, and Redding Pro Comp Dies. Congratulations!

rowdyb, OptimiStick: THANK YOU!

I like to shoot an EMP4 as a fun/range gun..............

Since many here dislike the powder check dies for their tendency to scatter powder from the probes, this is another route you can consider..............

After some more thorough testing, it appears this barrel maxes out with the Coated 147g FP at ~1.155" COAL. So, I decided to load up 50 at 1.140" with 3.2g of N320.............. Now, to get through another week of quarantine! Thanks for everyone's feedback, and I'll report back ASAP.

Yes, according to many users sharing their experiences............ https://youtu.be/_C7iRZDa8eA The Stock Dillon RL1100: https://immortobot.com/index.php?main_page=product_info&cPath=13_43&products_id=379 The CNC Shooter that also works on the RL1100: https://immortobot.com/index.php?main_page=product_info&cPath=37_24&products_id=229