Jump to content
Brian Enos's Forums... Maku mozo!

gusshuman

Members
 View Profile  See their activity

  • Posts

    50

  • Joined

  • Last visited

 Content Type 

Everything posted by gusshuman

  1. gusshuman
    like mine
  2. gusshuman
    Because I'm too lazy to pick up brass, and too tight to leave it laying.
  3. gusshuman
    8-3/8" barrel too long for production. Six inches max.
  4. gusshuman
    Hogue makes a nylon grip also. Cheap, not sticky.
  5. gusshuman
    Andy was a true gentleman. He will be missed by many.
  6. gusshuman
    Try this. When you pull the rod out of the primer tube, lift the lever that triggers alarm and return rod to tube. This will provide force to primers still in tube. Hope this helps.
  7. gusshuman
    Please correct me if I'm wrong, but doesn't some commercial ammo have crimped primers?
  8. gusshuman
    Starline.
  9. gusshuman
    You'll have that. just my .02 Al
  10. gusshuman
    Hodgdon site shows 3.5 grains of trail boss producing 658fps with a 230 gr. lrn. Hope this helps. Al
  11. gusshuman
    Try an Ultra-Dot Match Dot. 2, 4, 6, 8 moa dot in one scope.
  12. gusshuman
    Before you get too upset, repeat the test tomorrow. The results may not be the same. One group against another doesn't tell you much. Shoot 5 or 10 groups of each.
  13. gusshuman
    Blade Tech DOH. About as good as anything.
  14. gusshuman
    .022"
  15. gusshuman

    gap

    gusshuman replied to hennuc's topic in Revolver Forum

    factory S&W specs are .0006 Shouldn't that be .006"
  16. gusshuman
    Winchester brass is a tight fit in the Ranch clips. But, no short colt from Win. Al
  17. gusshuman
    Good luck! Everybody needs a 617. Al
  18. gusshuman
    1050 would be great but the casefeeder is at least much gooder. Al
  19. gusshuman
    Zero's shoot very well in my revolvers and a lot of autos too from what I hear. Al
  20. gusshuman
    Mine feeds 38s without the washer. Just didn't have one. It's dropped a bunch of em down the tube. Al
  21. gusshuman
    Why do we have to keep a hammer spur that we are not allowed to use? Al
  22. gusshuman
    Sat. 16th, rumor has it. Al
  23. gusshuman
    We measured them in May. IIRC the iron is 2" and the wood is 1/2". Maybe Griz will confirm or correct. Al
  24. gusshuman
    Just had the action checked and slicked up, single-action notch removed and put on some Hogue grips. Do what you need to the sights. Al
  25. gusshuman
    Toolman makes a mover front sight. Al
×
×
  • Create New...