angus6

Been paying $23 and change at Grafs & Sons for a while now for CCI primers. Figure when were back below $20 it'll be time to resupply

I'll jump in here and wait for more info also, as were just starting on this project myself. Have things roughed in, now need to make some stand offs to position the motor

another one for off the ground , just wished there were more guys shooting and leaving .45 , got enough 9mm and .40 to choke a horse

When I was buying cast bullets John was my go to guy also, Great guy and was always able to catch him at the livestock auction so there was no shipping

Mike thanks for the heads up,, the wife claimed my MAP1 FS , looks like it's time she bought her own

Not so sure the SDB saved me any money , 5 conversions and 4 hoppers later

Hey I found the 1 piece of brass you guys missed picking up

Saw that someone had added some bigger angle iron deflectors to the stands, I'll try not to shoot them up to bad before the match. You guys come up to work on things again give a heads up as I can't believe the steel we scrap out at work and I've got lots of free time to give a hand

Never gone to watch the Masters, how many people usally shoot it ? Looks like I'll get to go watch it on the 5th

It’s been a few decades from my last swap but IIRC you only need the anvil, cup, tube and two allen wrenches (one for the 3 socket head cap screws and another for the set screw that retains the anvil). Great, guess I'll tack that on to my next order

So do I pick up a whole priming assembly or just a primer slide and magazine tube to swap from small to large primers

Their toll free number works great, now if you end up with someones voice mail you might want to call back

Great to see people stepping up for a good cause,My link A big Thanks to Richard Heinie,Springfield Armory,Kurtz Miller, Matt Davis and to all those that donated parts

Tim thanks for the tip , forwarded to a buddy for future use

Your FFL distributor is a waste of time , primers are there to be had. Why new brass ? Here's a little help with primers if you have a cell phone, set up a e/m just for primers,go to Midways site put in for product notification to that e/m. Works great I was able to keep 10 of us supplied with primers that way last year

It's hard to believe people are still waiting on primers,Have been able to purchase Federal,Winchester,CCI,PMC,Magtec and wolf pretty much all along here in MO.usally no choice to what you got but atleast there were primers

Guess I'll look at swapping eveything over to the failsafe style

I like lead for the cost saving plus thats the only thing the MarkV serves me

My original powder measure set up doesn't have the fail safe linkage, picked up a couple more measures that are set up for the fail safe. Should I up date everything and use the fail safe set up or convert the 2 new measure back to spring return ?

Have had to clean junk out a coulpe times too

So I guess it wouldn't hurt to make an extra brass rod and countersink the center

I see that now, just a little ways

I picked one up second hand, they are real easy to adjust

Frank if your inrested in getting rid of the larde primer stuff I'm in need so that I can quite useing the LCT for my large prime loads Email me Bob

I don't bother sorting either