AzNooB Posted April 12, 2017 Share Posted April 12, 2017 I don't reload and don't plan to at this stage in the game. What are some factory ammo options for production that are a good value? Is there anything out there in bulk (1000 round cases) that is loaded near minor PF? I'd like to get under $0.20 per round if possible. Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted April 12, 2017 Share Posted April 12, 2017 Lots of reman ammo if you are open to that. Georgia Arms is popular. I use Rush Creek ammo with zero failures. Link to comment Share on other sites More sharing options...
gixxerjunky Posted April 12, 2017 Share Posted April 12, 2017 http://www.sgammo.com/product/speer/1000-round-case-9mm-luger-speer-lawman-147-grain-tmj-subsonic-ammo-53620For new ammo I have ran this stuff a little bit and it shot well. You could always look into a company who sells reloads and buy a case at a time. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Pistolpete9 Posted April 12, 2017 Share Posted April 12, 2017 I just tried a case of the Freedom Munitions 135 hollow points and they have been wonderful in my pistol. Accuracy is really good, shoots soft, and reliability is 100%. However, I didn't chronograph any of it so I'm not sure what PF it is. Also, my competition pistol has yet to choke on anything at all and I'm over 5k through it (less than a year old), so I'm not sure that it's a great measuring stick. For your price though, Freedom Munitions is probably one of the better bets. It is bargain basement ammo. Link to comment Share on other sites More sharing options...
calebj06 Posted April 13, 2017 Share Posted April 13, 2017 10 hours ago, SlvrDragon50 said: Lots of reman ammo if you are open to that. Georgia Arms is popular. I use Rush Creek ammo with zero failures. I have used rush creek as well. Good stuff and cheapest price I could find. Their site doesn't work well from your phone though. Make sure to use desktop mode to see what's in stock. Link to comment Share on other sites More sharing options...
calebj06 Posted April 13, 2017 Share Posted April 13, 2017 I'll try to chrono my rush creek tomorrow for you if you would like. I need to do it anyway in case I need it for a match Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted April 13, 2017 Share Posted April 13, 2017 Just now, calebj06 said: I'll try to chrono my rush creek tomorrow for you if you would like. I need to do it anyway in case I need it for a match That would be much appreciated. Which one are you using? The 124 or 115gr? Link to comment Share on other sites More sharing options...
calebj06 Posted April 13, 2017 Share Posted April 13, 2017 My rush creek is 115. My personal reloads I have went to 124 but if I run short the rush creek will be my backup. I need to make sure it will hit PF. Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted April 13, 2017 Share Posted April 13, 2017 2 minutes ago, calebj06 said: My rush creek is 115. My personal reloads I have went to 124 but if I run short the rush creek will be my backup. I need to make sure it will hit PF. Ahh okay. I use the 115gr Rush Creek TMJs as practice ammo and their 124gr HPs as match ammo. Link to comment Share on other sites More sharing options...
AzNooB Posted April 13, 2017 Author Share Posted April 13, 2017 17 hours ago, calebj06 said: I'll try to chrono my rush creek tomorrow for you if you would like. I need to do it anyway in case I need it for a match The price is right. Have you shot it for accuracy? Link to comment Share on other sites More sharing options...
calebj06 Posted April 13, 2017 Share Posted April 13, 2017 (edited) 3 hours ago, AzNooB said: The price is right. Have you shot it for accuracy? Just got back from shooting it. Average speed on five rounds was 1096. These were 115gr so a power factor of 126. That's CLOSE! So your not gonna get a softer shooting 115 as far as accuracy I can't say I tried real hard to put them all in one hole but I'm not that type of pistol shooter anyway. They don't shoot any different than anything else though. Caleb Edited April 13, 2017 by calebj06 Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted April 13, 2017 Share Posted April 13, 2017 The ammo shoots better than I can shoot... I'll say that. That would certainly explain why I like the 115gr way more than any other 115gr I've shot. Honestly the Rush Creek ammo is why I've delayed buying a press. It's cheap and reliable. Link to comment Share on other sites More sharing options...
AzNooB Posted April 14, 2017 Author Share Posted April 14, 2017 (edited) 21 hours ago, calebj06 said: Just got back from shooting it. Average speed on five rounds was 1096. These were 115gr so a power factor of 126. That's CLOSE! So your not gonna get a softer shooting 115 as far as accuracy I can't say I tried real hard to put them all in one hole but I'm not that type of pistol shooter anyway. They don't shoot any different than anything else though. Caleb Thanks for the info! What gun/barrel length were you using? The reason I'm concerned with accuracy is because I've purchased reloaded ammo that would group about 2.5-3 ft at 25 yards. On a good day, I can hold a < 6" group with any factory ammo at that distance while shooting freestyle. Edited April 14, 2017 by AzNooB Link to comment Share on other sites More sharing options...
calebj06 Posted April 14, 2017 Share Posted April 14, 2017 Factory glock 19 Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 14, 2017 Share Posted April 14, 2017 Try some Precision Delta 147gn! it was developed as a USPSA round. Will make about 130-131 PF in a G17, feels great and runs clean. Link to comment Share on other sites More sharing options...
streckjc Posted April 21, 2017 Share Posted April 21, 2017 Freedom Munitions is one I hear great things about. I'll be trying them myself. I hear it's very clean ammo too, so not much build up in the gun. 124gr and 135gr HP or RNFP are between 18c and 22c per round. Plus you can get either new or re-manufactured. Link to comment Share on other sites More sharing options...
davsco Posted April 21, 2017 Share Posted April 21, 2017 first, go to ammoseek.com or gunbot.net. both of these search for cheap ammo for you, and with ammmoseek you can narrow by brand, bullet weight, case material, etc. generally, for factory loads, the heavier-for-caliber bullets will give less recoil allowing faster follow up shots. i just ordered a case of fed am eagle 147g 9mm from SG Ammo for $226 shipped. fed has a $40 rebate on this, so net is $186 shipped which is a pretty nice price for new factory ammo. Link to comment Share on other sites More sharing options...
pete627 Posted April 21, 2017 Share Posted April 21, 2017 http://www.bitethebullet.co/9mm-5 16 cents a round and shipping ... Link to comment Share on other sites More sharing options...
undesiredeffect Posted April 25, 2017 Share Posted April 25, 2017 Anyone have experience or feedback on Leadheadammo.us? It was recommended by someone who shoots it, just can't much else on it. Link to comment Share on other sites More sharing options...
bigbob21 Posted April 26, 2017 Share Posted April 26, 2017 Anyone have experience or feedback on Leadheadammo.us? It was recommended by someone who shoots it, just can't much else on it. I shot leadhead bulk 9mm from ammo clearance back when I was a beginner... maybe chrono'd at 140-145 power factor. it worked well at the time. Had 1 squib tho... out of maybe 2-3000 rounds... sooooo yea. Up to you.I bought a Dillon 650 right after that... Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
R1_Demon Posted April 26, 2017 Share Posted April 26, 2017 Good info here. However, I have heard that you can't really beat the price of reloading your own. At least after the initial buy-in cost. Yes, it isn't really that cheap to buy-in, but afterwards, it really isn't bad. I bit the bullet (ok, pun intended. LOL) and just bought all of my reloading stuff just about a week ago to start reloading for upcoming competitions. I haven't reloaded anything yet, but I'm reloading for .40 S&W. However, just looking at the prices of even new brass and bullets (the initial powder and primer buy will already hold me over) is already saving me money over purchasing factory ammo. So, just a thought for future reference. I know you said you didn't want to reload right now, but if you really get into this and know you are going to be shooting a lot, it really might be an option. Plus, I do have a bunch of different calibers that I shoot (not necessarily for competition, but in general), so I also feel that can save me money too because now I just have to buy a shellplate and dies and I'm ready to rock for another caliber (besides what is needed to actually make the round itself). So, it isn't super cheap, but overall it will actually save you money. But if you are only going to shoot 500 rounds a year or something, no, then it won't. But if you are at least shooting 500-1000 rounds a month at one competition and practice, it will end up saving you some money. Just trying to help a little. Link to comment Share on other sites More sharing options...
Towens Posted May 9, 2017 Share Posted May 9, 2017 I prefer good ol' Winchester white box. Not always the cheapest, but it's never let me down. The brass is decent for reloading, if\when you get there. Check out luckygunner.com. They usually have some good deals on factory ammo. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now