ammowaster Posted May 17, 2009 Share Posted May 17, 2009 I had a bad batch of ammo the other day and realized I dont know the proped way to drive out a stuck bullet Main questions Take the barrel out of the gun or leave it in? My rounds both stopped right in front of the chamber so I just drove them out that end. Do I need to worry about which way I push the bullet out? Thanks Link to comment Share on other sites More sharing options...
Graham Smith Posted May 18, 2009 Share Posted May 18, 2009 Here is what I was told... Remove the barrel from the gun and wrap it in a cloth so you can hold it firmly. The bullet will usually be closer to the chamber than the muzzle, so insert a wooden dowel into the muzzle and tap it with a small hammer until the bullet comes out. Link to comment Share on other sites More sharing options...
1911jerry Posted May 18, 2009 Share Posted May 18, 2009 Even though I have never used it on my personal gun, I use a brass rod. It will dislodge the bullet quicker than wood and is softer than the barrel metal. so no gouging. JS Link to comment Share on other sites More sharing options...
Boats Posted May 18, 2009 Share Posted May 18, 2009 You can use a steel rod IF you bush it up to bore size with warps of masking tape. Make sure only the tape touches the bore. Light tap is generally all it takes. Steel rod bushed pushing a round lead ball is how I slug bores. Boats Link to comment Share on other sites More sharing options...
Flatland Shooter Posted May 18, 2009 Share Posted May 18, 2009 I've used brass rods for years. Go to the local welding supply and buy a brass rod in a diameter just under the diameter of your barrel. They usually come in 36" lengths. Cut to length. One welding rod yields a lifetime of squib rods and when they are loaned out at a match, no big deal when it never returns. Bill Link to comment Share on other sites More sharing options...
Jeff686 Posted May 18, 2009 Share Posted May 18, 2009 I've used brass rods for years.Go to the local welding supply and buy a brass rod in a diameter just under the diameter of your barrel. They usually come in 36" lengths. Cut to length. One welding rod yields a lifetime of squib rods and when they are loaned out at a match, no big deal when it never returns. Bill I bought mine for 9mm and smaller. I figured that's the smallest needed at any USPSA match... Link to comment Share on other sites More sharing options...
ammowaster Posted May 20, 2009 Author Share Posted May 20, 2009 Thanks guys So is removing the barrel the right way to go? Link to comment Share on other sites More sharing options...
ima45dv8 Posted May 20, 2009 Share Posted May 20, 2009 I've removed/beat out more than a few while standing on the firing line during a match. Barrel wasn't removed. Link to comment Share on other sites More sharing options...
XD Niner Posted May 20, 2009 Share Posted May 20, 2009 If I can remove it with a brass rod by simply tapping the rod forcefully by hand then I don't remove the barrel. If I have to resort to a hammer then I do. Link to comment Share on other sites More sharing options...
Chris iliff Posted May 20, 2009 Share Posted May 20, 2009 I've used brass rods for years.Go to the local welding supply and buy a brass rod in a diameter just under the diameter of your barrel. They usually come in 36" lengths. Cut to length. One welding rod yields a lifetime of squib rods and when they are loaned out at a match, no big deal when it never returns. Bill +1 Exactly what I did. I need to do it again, I only have one left in the range bag. Good way to make a friend fast. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted May 20, 2009 Share Posted May 20, 2009 (edited) The only one I've ever removed was a round 2/3s of the way down the barrel of a Glock 34. It was stuck bad. Used a fellow shooters squib rod. Placed the barrel breech-down on a wooden desk, and improvised a hammer out of a steel target frame. Came right out. I have never heard of anyone driving a squib out the muzzle end of the barrel. Edited May 20, 2009 by MemphisMechanic Link to comment Share on other sites More sharing options...
Armand Willis Posted May 21, 2009 Share Posted May 21, 2009 One tentacle at a time? Sorry... Link to comment Share on other sites More sharing options...
rrflyer Posted May 23, 2009 Share Posted May 23, 2009 thought I'd throw this out there. I had one the other day. Used a brass rod with the barrel still in the gun(1911) and when the bullet came out the breech end it smashed into the ejector and broke it. Link to comment Share on other sites More sharing options...
jasond Posted May 23, 2009 Share Posted May 23, 2009 I made up a brass squib rod pressed into a short piece of 1-1/4" delrin, and thus far (knock on wood), I've loaned it out a half dozen times and never needed it myself. If it isn't stuck to bad, you can smack it with your palm and not need a hammer. Good karma to have one in your bag! Link to comment Share on other sites More sharing options...
ammowaster Posted June 2, 2009 Author Share Posted June 2, 2009 Thanks for all the help guys Hopefully I wont need it again. I agree on the karma thing. If I buy my own I will probably never need it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now