kraigster414 Posted March 17, 2008 Share Posted March 17, 2008 Anybody reloading for their .45 ACP's? How do you like? What OAL do you use and a recommended range load would be appreciated. Thanks. Link to comment Share on other sites More sharing options...
pskys2 Posted March 17, 2008 Share Posted March 17, 2008 (edited) Tried them with 4.2 of Clays 720 f/s but a wide spread. The pressures are too light in a Revolver and you don't seem to get consistent combustion. With 4.5 of Clays velocity was about 780 f/s and much more consistent. Used 4.9 Clays for 840 f/s. All with OAL of 1.235". The major problem I've run into is the lack of accuracy past 25 yds. They seem to do well to that point, but beyond that the groups widen out til I can't hit a 12" plate at 50 yds. which is not something I can accept. Just using the above loads with JHP's the 50 yd groups come back in the 4" range. Might just be my guns don't like them, but I had similar problems with HB bullets in 1911's in the late '80's. Edited March 17, 2008 by pskys2 Link to comment Share on other sites More sharing options...
Joe4d Posted March 17, 2008 Share Posted March 17, 2008 Fast powder high pressures and they work. I loaded a bunch for a bulleseye shooter and he really liked them in his older original colt Milspec beaters. The Kimber and Les baer's with nice match grade barrels didnt like them so well. Link to comment Share on other sites More sharing options...
Chills1994 Posted March 17, 2008 Share Posted March 17, 2008 You're saying a Berry's 185 grain, Hollow Base, Round Nose, design of a bullet, right? Is this a typical Berry's plated bullet? Or is it lead? If it's a Berry's plated bullet, it's too rich for my blood (close to $42 per 250 ). Link to comment Share on other sites More sharing options...
joecichlid Posted March 18, 2008 Share Posted March 18, 2008 I used to run them all the time in my .45, always seated them to 1.250-1.255. Roughly the same OAL as mil ball ammo. Joe W. Link to comment Share on other sites More sharing options...
buddy_fuentes Posted March 18, 2008 Share Posted March 18, 2008 I've shot them in forty and forty-five and both performed well. I shot them in a Les Baer and a Wilson with excellent accuracy. As noted above, some guns just don't like certain bullets or loads. I was using WW 231, Winchester primers, loaded to 1.245". Buddy Link to comment Share on other sites More sharing options...
open17 Posted March 18, 2008 Share Posted March 18, 2008 I use the Berry's 185 HBRN in revolver. Federal primer, 5.7 Red-dot, 1.250 OAL. Chrono's at 172 PF in my 5" 625. What's kind of odd is that it only makes 162 in my 5" Single Stack gun! Accuracy is great in the Revo, never really tried it in a Auto. Link to comment Share on other sites More sharing options...
Eager Posted March 18, 2008 Share Posted March 18, 2008 I just started using them with 6.1gr of Titegroup and an OAL of just over 1.250-in. They make major at that for me. Link to comment Share on other sites More sharing options...
pskys2 Posted March 18, 2008 Share Posted March 18, 2008 You're saying a Berry's 185 grain, Hollow Base, Round Nose, design of a bullet, right?Is this a typical Berry's plated bullet? Or is it lead? If it's a Berry's plated bullet, it's too rich for my blood (close to $42 per 250 ). It's not Berry's that's the problem. Their 230 Plated RN are just as good as any FMJ. But it is Berry who makes the 185 HBRN, I've used them in a 625 for ICORE. As long as I don't try to use them past 25 yds. I like them fine. It's just been my experience a HB bullet is a bit touchier than a plain base for accuracy at extended ranges. And the only Plated HB bullet I know of is made by Berry's. I know the theory of HB bullets, works with WC in .38 Specials, etc... I've just never had any good luck with any in a .45. Link to comment Share on other sites More sharing options...
kraigster414 Posted March 18, 2008 Author Share Posted March 18, 2008 Many thanks for the great info. Link to comment Share on other sites More sharing options...
mr1911 Posted March 29, 2008 Share Posted March 29, 2008 (edited) I used berry's 185 gr HBRN .45 acp for quite a while before the prices skyrocketed. I loaded them 1.230" with 4.8 grs Clays and was quite happy with the lower recoil and good accuracy under 25 yds, not sure if that would cut it for major though, never Chrono'd it. Edited March 29, 2008 by mr1911 Link to comment Share on other sites More sharing options...
shooting for M Posted March 29, 2008 Share Posted March 29, 2008 I used them once with clays nice soft shooting load. I don't remember how much powder to get major, same OAL as 230 ball worked well in one of my guns, unfortunately it wasn't the one I was using for the match I was shooting. It chrono'd about 172-173 in like three different guns, but after being loaded for a few weeks I barely made major. Really neat idea for a light bullet for .45 though. Jason Link to comment Share on other sites More sharing options...
mwx40x40 Posted March 29, 2008 Share Posted March 29, 2008 I just started using them with 6.1gr of Titegroup and an OAL of just over 1.250-in. They make major at that for me. 5.9gr of Titegroup for me in 6.5" 25-2. but when it was all over I went back to 230 Berry with 4.0 gr Clays. Link to comment Share on other sites More sharing options...
chbrow10 Posted September 19, 2008 Share Posted September 19, 2008 Like others posting here, I am loading them with 4.5 and 4.6 grains of ordinary Clays to and OAL of 1.22-1.23" I use these for club competition, not USPSA, as I have no hope of making major. The round is accurate out to 25, as others have said, with less recoil than a 9mm (IMHO). Link to comment Share on other sites More sharing options...
HighVelocity Posted September 19, 2008 Share Posted September 19, 2008 I use them loaded with 4.5grs Clays, OAL 1.220. It's the perfect load for my Kimber Ultra CDP to use in IDPA BUG matches. Insanely accurate out to 15 yards from the 3" barrel and no recoil to speak of. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now