oddjob Posted December 23, 2002 Share Posted December 23, 2002 Whats the best way?? Any "secret " formulas out there?? I got a small attachment for my Dremel, but was told not to even think about that method....Help... Link to comment Share on other sites More sharing options...
warpspeed Posted December 23, 2002 Share Posted December 23, 2002 scrape, scrape, scrape Link to comment Share on other sites More sharing options...
lynn jones Posted December 23, 2002 Share Posted December 23, 2002 don't shoot lead.. put several drops of oil in the comp at the range and let a few rounds off. repeat lynn Link to comment Share on other sites More sharing options...
Tony Chiavacci Posted January 8, 2003 Share Posted January 8, 2003 Dental picks. You can get them from places like Natchez or Cheaper Than Dirt. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted January 8, 2003 Share Posted January 8, 2003 Best thing I've used is the little red tool that Arredondo makes, it work really good and worth the $$$. They are made out of some hard stuff and the shape is much better than the dental picks. http://www.arredondoaccessories.com/A_tools.cfm Link to comment Share on other sites More sharing options...
2alpha Posted January 8, 2003 Share Posted January 8, 2003 Shoot hollowpoints or other bullets with a solid base, never shoot lead. Link to comment Share on other sites More sharing options...
Steve Anderson Posted January 9, 2003 Share Posted January 9, 2003 What harm will come from letting a comp gunk up a little? Is it a big deal? Link to comment Share on other sites More sharing options...
2alpha Posted January 9, 2003 Share Posted January 9, 2003 If you let enough stuff build up the comp loses efficiency. Back in the old lead bullet days the lead could build up enough to touch the bullet, I haven't seen carbon do that. Link to comment Share on other sites More sharing options...
TheOtherErik Posted January 9, 2003 Share Posted January 9, 2003 What about those sprays that say the prevent comp fouling? Do they work or are they just a waste of money? Link to comment Share on other sites More sharing options...
kbear38S Posted January 9, 2003 Share Posted January 9, 2003 What about those sprays that say the prevent comp fouling? Do they work or are they just a waste of money? Send me $3 for shipping and I'll send you a bottle that's 99.5% full. Link to comment Share on other sites More sharing options...
TheOtherErik Posted January 9, 2003 Share Posted January 9, 2003 That awnsers my question....the product isnt worth the packaging... Link to comment Share on other sites More sharing options...
2alpha Posted January 9, 2003 Share Posted January 9, 2003 There is a trick way to clean a comp but you need a bead blaster. Take your barrrel and comp out and plug both ends of the barrel, then mask everything but the top ports. In the bead blast cabinet stick the nozzel in the ports and blast lead carbon and anything else out. Be sure and remember to unplug the barrel and get all the sand out before using. Works great!! Link to comment Share on other sites More sharing options...
shred Posted January 10, 2003 Share Posted January 10, 2003 In the past I've held a sacrificial feeler gauge over the barrel crown and had at the buildup with a ball-end dremel bit. I've been told this is isn't the best for comp longevity, but comps aren't exactly heirlooms around here. (Edited by shred at 1:16 pm on Jan. 10, 2003) Link to comment Share on other sites More sharing options...
Carlos Posted January 14, 2003 Share Posted January 14, 2003 What about Kano Kroil? It is supposed to be a penetrating oil that gets under copper fouling. What about comp fouling? Link to comment Share on other sites More sharing options...
scooterj Posted January 17, 2003 Share Posted January 17, 2003 If your gun was set up for 175 pf, might as well let a little fouling build up so it will be effective at the lower pf Link to comment Share on other sites More sharing options...
rkgsmith Posted January 19, 2003 Share Posted January 19, 2003 I seem to remember a mixture of peroxide and vinegar. Let the comp soak in that for a while, it actually bubbles away the lead. However it also tends to rust your bluing, so keep an eye on it and don't let it soak overnight. Don't take this as gospel, but it may be worth a try. Link to comment Share on other sites More sharing options...
benny hill Posted January 21, 2003 Share Posted January 21, 2003 if you shoot a slow powder that burns in the comp instead of a faster one that burns in the barrel, youwill not have any lead in your comp. I have been shooting accurate # 7 & win. 571 for years & never have a speck of lead in any comp I use. Link to comment Share on other sites More sharing options...
JRBean Posted January 22, 2003 Share Posted January 22, 2003 I use 3N37 with a 115gr bullet and regardless of the type of bullet the comp stays clean. I changed to SP2 and the fmj bullets started to lead up the comp, went back to 3N37 and it cleaned it out, the person who had the gun before me used N350 with 124gr fmj and they leaded up the comp. I have one of Benny's old comps and three ports in the barrel so my load with the 3n37 is pretty hot, maybe that has something to do with it. Link to comment Share on other sites More sharing options...
shooterx10 Posted January 28, 2003 Share Posted January 28, 2003 I managed to get some of the lead fouling out of my comp! Here is what I did (your results may vary): 1. I put drops of Shooter Choice in the comp and let it soak 2. I then used my Dremel tool with attachment #84922 Sil. Carb. Grinding Stone on the lead fouling at the SLOWEST speed. Or the more fine stone you can find. 3. The lead fell out like sand with no damage to the comp by the grinding stone (because the stone is a light grit) 4. Spray out any lead that didn't come out with Gun Scrubber or an aersol gun cleaner. 5. repeat as necessary until all the lead is out (Edited by shooterx10 at 12:36 pm on Jan. 28, 2003) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now