Bakerjd Posted November 11, 2022 Share Posted November 11, 2022 Well as the title says I'm getting ready to figure out a 9 minor load for 147s and clean shot powder. OAL is 1.100". Never used clean shot and haven't used 147s in a long time. Anyone have some good starting points? Looking for about a 130pf. Link to comment Share on other sites More sharing options...
Scotty_JR Posted November 11, 2022 Share Posted November 11, 2022 3.4gr to 3.6gr roughly. Depending on your barrel length and brand, of course. Link to comment Share on other sites More sharing options...
BigMoneyGrip Posted November 11, 2022 Share Posted November 11, 2022 I would state what bullet you are using. There is a big difference in charge weight of jacketed, coated or lead. Link to comment Share on other sites More sharing options...
Blackgun34 Posted November 11, 2022 Share Posted November 11, 2022 Using a coated 147fp. 3.2gr of CS at 1.130 OAL. Average of 900.4 FPS with a Glock 17 gave me a 132PF. Good starting point for you. Link to comment Share on other sites More sharing options...
Joe4d Posted November 11, 2022 Share Posted November 11, 2022 You ever loaded with Acurate #2 ? same same Link to comment Share on other sites More sharing options...
Bakerjd Posted November 11, 2022 Author Share Posted November 11, 2022 Ahh shoot. Bullets are SNS 147GN rn coated. Thanks for the info everyone. @Joe4d haven't loaded with AA #2. Link to comment Share on other sites More sharing options...
Boomstick303 Posted November 12, 2022 Share Posted November 12, 2022 I am getting ready to load up some 147 gr Precision Delta V2 JHP with Clean shot. Looks like I can start with 3.3 gr and work up or down from there then. Link to comment Share on other sites More sharing options...
Bakerjd Posted November 15, 2022 Author Share Posted November 15, 2022 Well I changed it up slightly. Thought I had some SNS 147s.... I don't. I have 135s and 124s. I did happen to have a box of brass monkey 147s though. So I loaded 15 at 3.0gn amd 15 a 3.2gn. I will say I've never used a powder that was like little tiny balls before and it loads quite well. Link to comment Share on other sites More sharing options...
Farmer Posted November 16, 2022 Share Posted November 16, 2022 3 hours ago, Bakerjd said: Well I changed it up slightly. Thought I had some SNS 147s.... I don't. I have 135s and 124s. I did happen to have a box of brass monkey 147s though. So I loaded 15 at 3.0gn amd 15 a 3.2gn. I will say I've never used a powder that was like little tiny balls before and it loads quite well. You should try H380 for rifle. That stuff is tiny, tiny and rolls all over. Link to comment Share on other sites More sharing options...
ysrracer Posted November 20, 2022 Share Posted November 20, 2022 Name: 9mm: 147gr: Cleanshot 3.5gr: Mixed Case: OAL 1.140 Notes: Para 1911 5" Shots: 7 Average: 901 ft/s SD: 12 ft/s Min: 874 ft/s Max: 912 ft/s Spread: 38 ft/s Power Factor Average: 132 Power Factor Low: 128 Power Factor High: 134 Barometric Pressure: 30 in Hg Temperature: 68 F Weight: 147.0 gr. Powder: Cleanshot 3.5gr Case: Mixed Primer: Rem SPP Bullet: 147gr Gun: Para 5" 1911 Link to comment Share on other sites More sharing options...
Bakerjd Posted November 21, 2022 Author Share Posted November 21, 2022 So 3.0gn cleanshot, ginex spp, 1.10 OAL, BMB 147gn bullets out of a brand new canik rival is 130pf average of 10 rounds. Same load except 3.2gn amd it was 136pf. Since I'm a bit lazy I'm going to load the rest of the 1000 rounds at 3.1 and do some drills and hopefully an indoor match amd see if I like this gun or not. So far it is really really nice shooting. Link to comment Share on other sites More sharing options...
Boomstick303 Posted November 21, 2022 Share Posted November 21, 2022 12 hours ago, Bakerjd said: BMB 147gn bullets Sorry, but is this a coated bullet? Link to comment Share on other sites More sharing options...
Bakerjd Posted November 22, 2022 Author Share Posted November 22, 2022 8 hours ago, Boomstick303 said: Sorry, but is this a coated bullet? Yes. Brass monkey bullets. Link to comment Share on other sites More sharing options...
Bakerjd Posted January 17, 2023 Author Share Posted January 17, 2023 Loaded about 3k rounds after getting a load worked up for my Tanfo Stock 2 and CZ A01LD. 3.2GN, 1.130 OAL, BMB 147s, ginex spp. Right at 130PF for the stock 2 so probably about 132-135pf in the A01LD. Shoots soft, flat, almost no smoke at all. Does seem to leave a slight bit more gunk in the gun then ramshot comp but that could also be me just not cleaning guns a whole lot. It meters damn well too. I have to say as much as I love ramshot comp I may continue to use this. It is harder to find it seems though. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now