erwos Posted November 23, 2022 Share Posted November 23, 2022 Just took mine out and put 200+ rounds of CCI SV through it. No failures or (obvious) keyholing. Accuracy was pretty tight at 10yds, which was a nice bonus. The 20rd mags are crazy, it feels like they last forever compared to the usual 10rd mags you get in these sorts of pistols. Some 25rd mags would be great, hopefully those are coming eventually. A few other notes: 1. Slide release is pretty loose, if you slap a mag in with any force, it will drop. I tend to regard this as a bug, but I know some people regard it as a feature. 2. You can use the takedown lever as a makeshift thumb rest, and it works passingly well for this. I am vaguely surprised they didn't put more of a ledge on it, given how popular that feature is on the P320. 3. The slim grip is growing on me; it's one of the few pistols I can hit the mag release on without shifting my hand. A Legion version of this with a TXG grip would be amazing. It is a little more flippy than my MkIVs due to the 17oz weight. Link to comment Share on other sites More sharing options...
Almo Posted November 24, 2022 Share Posted November 24, 2022 I also have the Holosun 407K on mine. Never shot it with the iron sights. Tried about 6 different types of ammo. The only one that gave me issues was a very light target load that didn't always eject. Another target load worked just fine. Accuracy was good with all loads. As Cuz said, I wish it were a little heavier. The sights rise up a little more than I would like. I can actually shoot my Walther PPQ 22LR with iron sights faster. It may just be a matter of getting used to the red dot. Careful loading of the magazine is critical. If loaded correctly, it's very reliable. Link to comment Share on other sites More sharing options...
Cuz Posted November 24, 2022 Share Posted November 24, 2022 Fingers crossed that Armory Craft has the P322 trigger on sale for Black Friday… Link to comment Share on other sites More sharing options...
HOGRIDER Posted November 26, 2022 Share Posted November 26, 2022 On 11/24/2022 at 6:58 PM, Cuz said: Fingers crossed that Armory Craft has the P322 trigger on sale for Black Friday… @CuzBeen on the lookout for a BF sale on the AC P322 trigger...........at this point, it sure looks doubtful. May have to bite the bullet and get one anyway. I'm sure you'll enjoy it! Link to comment Share on other sites More sharing options...
Cuz Posted November 26, 2022 Share Posted November 26, 2022 17 hours ago, HOGRIDER said: @CuzBeen on the lookout for a BF sale on the AC P322 trigger...........at this point, it sure looks doubtful. May have to bite the bullet and get one anyway. I'm sure you'll enjoy it! They went on sale late last night for $10 off, I grabbed two. Also ordered a Comp-Tac holster for it as well. 15% off covered the shipping. Ordering was easy, the waiting is the hard part... Link to comment Share on other sites More sharing options...
HOGRIDER Posted November 26, 2022 Share Posted November 26, 2022 38 minutes ago, Cuz said: They went on sale late last night for $10 off, I grabbed two. Also ordered a Comp-Tac holster for it as well. 15% off covered the shipping. Ordering was easy, the waiting is the hard part... Fantastic! Glad to hear you stocked up on these! Ha! It'll be worth the wait........... Link to comment Share on other sites More sharing options...
bravofox Posted December 26, 2022 Share Posted December 26, 2022 the one i shot worked great, put a few hundred rounds through it in about an hour, no malfunctions at all. Link to comment Share on other sites More sharing options...
Almo Posted December 26, 2022 Share Posted December 26, 2022 Has anyone shot a Steel Challenge match with it yet? How did you do? I'm anxious to try it. Unfortunately, I've been on injured reserve the last two months and probably for the near future. Link to comment Share on other sites More sharing options...
Kirk Posted December 31, 2022 Share Posted December 31, 2022 On 11/16/2022 at 10:41 AM, Cuz said: Just wondering if anyone has tried the Armory Craft adjustable trigger on their P322. I put another 100 or so rounds through mine and they are running great. Then I saw this trigger and now I “need” one. If they have a Black Friday sale, I’m pretty sure I’ll end up getting one to try. Mostly just because it comes in red… Sorry if I’m late here, but I purchased the AC trigger and it is absolutely incredible. A huge upgrade over the stock trigger in my opinion. I’d definitely recommend it. Link to comment Share on other sites More sharing options...
rtl Posted December 31, 2022 Author Share Posted December 31, 2022 44 minutes ago, Kirk said: Sorry if I’m late here, but I purchased the AC trigger and it is absolutely incredible. A huge upgrade over the stock trigger in my opinion. I’d definitely recommend it. Shoot. . . . I’m going to have to get one of those I guess. and another couple of mags. and a couple thousand more MiniMags. . . . . . . RTL Link to comment Share on other sites More sharing options...
Cuz Posted January 3, 2023 Share Posted January 3, 2023 On 12/31/2022 at 9:11 AM, rtl said: Shoot. . . . I’m going to have to get one of those I guess. and another couple of mags. and a couple thousand more MiniMags. . . . . . . RTL Damn, save your money in the mini mags and spend it elsewhere. My P322 shoots the cheap bill ammo with no problems at all. And, yes, the AC trigger is very nice. Link to comment Share on other sites More sharing options...
rtl Posted January 3, 2023 Author Share Posted January 3, 2023 18 hours ago, Cuz said: Damn, save your money in the mini mags and spend it elsewhere. My P322 shoots the cheap bill ammo with no problems at all. And, yes, the AC trigger is very nice. Good to know. Thanks RTL Link to comment Share on other sites More sharing options...
erwos Posted January 4, 2023 Share Posted January 4, 2023 I had some nose-up feed failures last time I took it out, but it was also 30f and I don't think I lubed it beforehand. All the failures were near the start of a 20rd magazine. Haven't noticed any leading or keyholing so far. Has anyone had a chance to try out the 25rd mags yet? Link to comment Share on other sites More sharing options...
Almo Posted January 4, 2023 Share Posted January 4, 2023 erwos, I also had some failures until I watched this video from Phil Strader of Sig. Not sure if that's your issue or if you're already aware of it. Link to comment Share on other sites More sharing options...
erwos Posted January 5, 2023 Share Posted January 5, 2023 13 hours ago, Almo said: erwos, I also had some failures until I watched this video from Phil Strader of Sig. Not sure if that's your issue or if you're already aware of it. I was... pretty standard procedure for 22 magazines in general. I usually do a once-over to make sure the rounds look like they're in there properly, but who knows, maybe I screwed up. Link to comment Share on other sites More sharing options...
Matt1911 Posted January 8, 2023 Share Posted January 8, 2023 I finally got one of these pistols. ran about 400 rounds of various types of ammo CCI mini mags both RN & HP, CCI Stinger, CCI copper, Federal bulk pack plated HP, Aguila plated all worked well. Federal auto match lead RN, Aguila lead RN, and Winchester plated HP all had multiple stovepipes. Link to comment Share on other sites More sharing options...
Almo Posted January 8, 2023 Share Posted January 8, 2023 Sounds like uncoated lead is the main issue. I have shot waxed lead bullets and they worked fine. I have a bunch of Norma Tac22 that I'm anxious to try. It is heavily oiled. I'll have to see how much of the oil wipes off while I'm loading them in the magazine. Has anyone tested these? Link to comment Share on other sites More sharing options...
erwos Posted January 19, 2023 Share Posted January 19, 2023 I took my P322 back out and ran a few hundred rounds of CCI SV and Fed Automatch through it. No gun failures, but did have a round of CCI SV that had a priming issue and wouldn't go off after a couple trips through the gun. I did put some Slip 2000 on the rails this time, and loaded the mags myself. Very disappointed that Sig didn't release an X5 or Legion version at SHOT. This gun, but heavier with a thicker grip, would be my hands-down choice for any rimfire action sport that could gain advantage from a larger-cap mag. Link to comment Share on other sites More sharing options...
rtl Posted January 19, 2023 Author Share Posted January 19, 2023 5 hours ago, erwos said: I took my P322 back out and ran a few hundred rounds of CCI SV and Fed Automatch through it. No gun failures, but did have a round of CCI SV that had a priming issue and wouldn't go off after a couple trips through the gun. I did put some Slip 2000 on the rails this time, and loaded the mags myself. Very disappointed that Sig didn't release an X5 or Legion version at SHOT. This gun, but heavier with a thicker grip, would be my hands-down choice for any rimfire action sport that could gain advantage from a larger-cap mag. I was hoping too. A 5” version of the 322 with 3 25 rnd mags, comp, and dot would have been very interesting. Thanks, RTL Link to comment Share on other sites More sharing options...
Cuz Posted January 20, 2023 Share Posted January 20, 2023 20 hours ago, rtl said: I was hoping too. A 5” version of the 322 with 3 25 rnd mags, comp, and dot would have been very interesting. Thanks, RTL Noooooooo!!! Forget about the comp. If you want an Open gun get yourself the TX-22 Competition. The P322 is perfect as a Carry Optics rimfire. Although heavier would be a little better… Link to comment Share on other sites More sharing options...
rtl Posted January 20, 2023 Author Share Posted January 20, 2023 Already got one of those with a comp Rimfire Optic is doing just fine. I do like the Sig better though. RTL Link to comment Share on other sites More sharing options...
Matt1911 Posted February 12, 2023 Share Posted February 12, 2023 On 12/26/2022 at 12:55 PM, Almo said: Has anyone shot a Steel Challenge match with it yet? How did you do? I'm anxious to try it. Unfortunately, I've been on injured reserve the last two months and probably for the near future. I took 1st in my division (iron sights), 4th overall at my local Steel Challenge match a couple weeks ago. im really liking this pistol. Link to comment Share on other sites More sharing options...
Almo Posted February 14, 2023 Share Posted February 14, 2023 Congratulations, Matt1911. I'm anxious to try it at a Steel Challenge. I'm going to shoot a match this Sunday but, after a 3-1/2 month layoff from shooting, I think I'll stick to my Walther with iron sights for this one. I'm a lot more familiar with it. I may try the Sig with the red dot next month. Link to comment Share on other sites More sharing options...
Cuz Posted February 14, 2023 Share Posted February 14, 2023 I’ve got a couple thousand rounds through mine so far, still loving it. Haven’t cleaned it yet either. Don’t plan to until it stops working. Link to comment Share on other sites More sharing options...
dtuns Posted February 14, 2023 Share Posted February 14, 2023 I got one and have trouble even getting 19 rounds in a magazine. It has FTF with more than 17 loaded in magazine. Works great if I only load 17 rounds. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now