Tampa-XD45 Posted December 17, 2018 Share Posted December 17, 2018 Looks like Robin has been doing some welding: http://taylorfreelancestore.com/the-roosevelt-high-capacity-pcc-mag-with-extension-red/ Link to comment
pbRex Posted January 6, 2019 Share Posted January 6, 2019 I ordered one for a hoser match and was happy to have it. TF did a good job on these (construction) and its nice to find these available without having to DIY. Link to comment
Hi-Power Jack Posted January 6, 2019 Share Posted January 6, 2019 Did it work flawlessly for you ? Link to comment
Posvar Posted January 6, 2019 Share Posted January 6, 2019 Excellent if you have a Colt lower. Johnny Lim makes one as well if you buy a Tron pcc. Link to comment
Aircooled6racer Posted January 6, 2019 Share Posted January 6, 2019 Hello: Or you could cut and weld one up yourself. Another option would be to use a Taccom splice. Nice to have options. Thanks, Eric Link to comment
MemphisMechanic Posted January 6, 2019 Share Posted January 6, 2019 1 minute ago, Aircooled6racer said: Hello: Or you could cut and weld one up yourself. Another option would be to use a Taccom splice. Nice to have options. Thanks, Eric The tricky part there is the mag spring I welded up a flawlessly functional 53rder and did this: Link to comment
Aircooled6racer Posted January 6, 2019 Share Posted January 6, 2019 Hello: You can also make a small sleeve to go over the springs to make one long spring. We did that years ago with AR15 mags. I did a India made MP5 magazine last year that worked great with the stock spring. Thanks, Eric Link to comment
pbRex Posted January 6, 2019 Share Posted January 6, 2019 10 hours ago, Hi-Power Jack said: Did it work flawlessly for you ? No not 100% but I can't blame the mag just yet. The PCC was brand new (only a couple hundred rounds) through it the week before the match and I was having feed issues. I had 2 double feeds during the match but nothing during the 200 round break-in session. Link to comment
troupe Posted January 9, 2019 Share Posted January 9, 2019 I have a friend that is a retired aerospace welder that made mine and it is 100 percent. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now