Shooter212 Posted September 6, 2018 Share Posted September 6, 2018 I am building a new pcc. I am really all in and figured I should have two. I am just wonder what everyone thinks is the best lower out there to start a build on right now. Link to comment
SJMPCC022 Posted September 6, 2018 Share Posted September 6, 2018 (edited) For my first and so far only PCC I bought a Joe Bob lower. I was going to buy a stripped and build it from there but I paid $239 for a complete lower with everything except the stock, hard to beat that price wise. From my reading here they are made by the same company that makes the 9mm lowers for Palmetto State Armory. The only change was the Taccom3 buffer system, but the Kaw Valley that came with it worked 100% and was just fine, although not as soft. I'm sure there are better ones, you will hear about ALL of them, but this one really works and has a HUGE magwell to boot! Also it feeds 100% so don't let anyone tell you the angle the mag sits at is wrong. My two cents. PS to that, if I were to do another gun, I would probably go with a QC10 lower and start from there. I have no interest in an off the shelf gun and a lot of people on here who know way more about this game than me ( for now that is) recommend them a lot. Truth be told, I never heard of QC10 before I joined this forum. Not to mention Max uses QC10 lowers and watch him shoot ! Edited September 6, 2018 by SJMPCC022 add content Link to comment
Startingover Posted September 6, 2018 Share Posted September 6, 2018 (edited) 1st -Jones Arms Kronos 2nd - QC 10 Edited September 6, 2018 by Startingover Link to comment
02doooce Posted September 6, 2018 Share Posted September 6, 2018 I have both the PSA gen 2 and a QC10 in Glock. Although the PSA works just fine, the QC10 is much nicer especially when it comes to loading/unloading a magazine (the PSA works, but the QC10 does it much better, faster, smoother). Sent from my iPhone using Tapatalk Link to comment
stick Posted September 6, 2018 Share Posted September 6, 2018 First off don't buy something because Max uses one! Yes, he's a excellent shooter. He will shoot good with anything you put in his hands. Everyone on here will tell you what you should buy because THEY like their product. Look for benefits and features that will you use. Are you just building a PCC to just plink with? What are your intentions with said PCC? Link to comment
Shooter212 Posted September 6, 2018 Author Share Posted September 6, 2018 I have a psa now with over 20,000 on it and it’s works awesome. All of the set screws that hold everything in place come lose with x number of rounds. Blue loctite doesn’t help don’t want to use red. I just check all of them and tighten them before a match and am always good to go. That was my first one and I cheaped out on most of it before I knew if I was going or take this seriously. Not looking for features don’t want lrbho I just want it to work and be able to get parts if I need them. Link to comment
Aircooled6racer Posted September 6, 2018 Share Posted September 6, 2018 Hello: I really like the QC10 lowers for Colt and Glock mags. They have the correct angle for great feeding out of the magazines. We have lots of PCC shooters here and some of the lowers out there are just very sloppy in the magazine area causing feeding problems. Thanks, Eric Link to comment
Flatland Shooter Posted September 6, 2018 Share Posted September 6, 2018 I have several of the PSA Gen 2 lowers. On the first one I thought I was going the inexpensive route and just wanted to learn about the 9mm PCC. Although I had built several AR-15's from scratch, I never even saw a 9mm taken apart. So I buy the first PSA and as expected, changed out a few parts (trigger, buffer, mag release) and it worked wonderfully. Due to all the comments that it was a train-wreck waiting to happen, I decided to build a second "backup" gun. The second turned into a third and fourth. Each is just a bit different to test ideas. Bottom line, all are PSA Gen 2's and all run like scalded dogs. The main match gun (my first) now has over 13,000 rds through it. Even though I've had no problems with magazines feeding or dropping when the mag release is hit, the folks at PSA decided to fine tune the lower and came up with the new Gen 3 gun. Link to comment
3gunnuts Posted September 6, 2018 Share Posted September 6, 2018 PSA has complete Glock lowers on sale for $149/ free shipping. Tough to beat. Just ordered one for a friend. I went with the KE Arms ambi (by accident since I am a righty. Zero issues and built it mag well. Link to comment
SJMPCC022 Posted September 6, 2018 Share Posted September 6, 2018 5 hours ago, stick said: First off don't buy something because Max uses one! Yes, he's a excellent shooter. He will shoot good with anything you put in his hands. Everyone on here will tell you what you should buy because THEY like their product. Look for benefits and features that will you use. Are you just building a PCC to just plink with? What are your intentions with said PCC? The Max comment was a joke and was intended to induce a smIle . Link to comment
Timido Posted September 6, 2018 Share Posted September 6, 2018 I have New Frontier, Tennessee Arms, and palmetto State. They all work great. If I was buying a new one it would be a Coda. I like the ambi mag release and controls better. Link to comment
Timido Posted September 6, 2018 Share Posted September 6, 2018 https://codaevolution.com/collections/pcc/products/pcc-ar-9-lower-receiver-coda-9 Link to comment
stick Posted September 7, 2018 Share Posted September 7, 2018 11 hours ago, SJMPCC022 said: The Max comment was a joke and was intended to induce a smIle . I know that. If I came across harsh, I'm sorry! Link to comment
mmlook Posted September 7, 2018 Share Posted September 7, 2018 don't forget: 1. JP GMR-13/15 - On the heavier side - Awesome fitment on the magwell side(which translates into awesome feeding) - huge mag release, and an even larger one available from JPhttps://jprifles.com/buy.php?item=JPGMR15LR-K1 2. Lead star arms LSA-9 - Skeleton receiver - Integrated feed ramp(no ramped barrel or add-on feed ramp needed)https://www.leadstararms.com/collections/receivers/products/copy-of-lsa-15-skeletonized-ar-15-receiver-set-stripped-red Link to comment
SJMPCC022 Posted September 7, 2018 Share Posted September 7, 2018 11 hours ago, stick said: I know that. If I came across harsh, I'm sorry! Not at all, just didn't want to come across as a dumbass! Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now