bigbob21 Posted October 10, 2016 Share Posted October 10, 2016 She's pretty ugly with the RMR...Window is probably the smallest on the market, and had to do a lot of dry firing to find the dot on the draw... managed to come in 2nd out of 22 at a local all steel match today behind an open B shooter... (I'm unclassified) The tolerances on my stock2 don't match those used by Bruce @ Primary so he suggested I add a piece of shim stock underneath... hasn't moved at all over 200 rounds...Looking at the available mounts vs optics that fit them, I think I'll stick to the RMR until someone makes an RTS2 dovetail mount... the slight increased window size of the delta point isn't worth buying another 400$ optic + $60 mount for me.The RTS2 is noticeably bigger and would therefore be worth my time if I continue to pursue carry optics next year. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
PrimaryBruce Posted October 10, 2016 Share Posted October 10, 2016 14 minutes ago, bigbob21 said: She's pretty ugly with the RMR... Window is probably the smallest on the market, and had to do a lot of dry firing to find the dot on the draw... managed to come in 2nd out of 22 at a local all steel match today behind an open B shooter... (I'm unclassified) The tolerances on my stock2 don't match those used by Bruce @ Primary so he suggested I add a piece of shim stock underneath... hasn't moved at all over 200 rounds... Looking at the available mounts vs optics that fit them, I think I'll stick to the RMR until someone makes an RTS2 dovetail mount... the slight increased window size of the delta point isn't worth buying another 400$ optic + $60 mount for me. The RTS2 is noticeably bigger and would therefore be worth my time if I continue to pursue carry optics next year. Sent from my iPhone using Tapatalk Like I said before, if you decide you want a refund, do not hesitate to let me know. With that said, I'm glad you were able to make it work as I know you didn't want to return it. Link to comment Share on other sites More sharing options...
bigbob21 Posted October 10, 2016 Share Posted October 10, 2016 No worries mate, thanks for your hard work on the limited runs Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
PrimaryBruce Posted October 10, 2016 Share Posted October 10, 2016 1 hour ago, bigbob21 said: No worries mate, thanks for your hard work on the limited runs Sent from my iPhone using Tapatalk Not a problem at all, sir. Link to comment Share on other sites More sharing options...
rootacres Posted October 17, 2016 Share Posted October 17, 2016 Here to see what happens Link to comment Share on other sites More sharing options...
zombywoof Posted October 23, 2016 Share Posted October 23, 2016 Link to comment Share on other sites More sharing options...
bigbob21 Posted October 24, 2016 Share Posted October 24, 2016 (edited) very nice zomby anyone know if the tanfo lpa rear sight cut is similar to the berreta 92 lpa cut? I found a C-more sts dovetail mount for a beretta 92 and was curious if it could fit the stock2.... if not, maybe with some light filing or shim stock... seems like all the red dots on the market are +/- 1mm from each other in size until you get to the rts2.... Edited October 24, 2016 by bigbob21 Link to comment Share on other sites More sharing options...
PrimaryBruce Posted November 6, 2016 Share Posted November 6, 2016 (edited) We're doing a massive close out sale on Stock II (should fit any LPA dovetail) optic mounts. We will no longer be producing them. Once what's in stock is gone - that's it! http://primarymachine.com/tanfoglio-stock-ii-optic-mount/ Edited November 6, 2016 by PrimaryBruce Link to comment Share on other sites More sharing options...
67rschev Posted November 20, 2016 Share Posted November 20, 2016 Primary Machine , Great fit , function , and in my hands in two days . Thanks Link to comment Share on other sites More sharing options...
PrimaryBruce Posted November 20, 2016 Share Posted November 20, 2016 3 hours ago, 67rschev said: Primary Machine , Great fit , function , and in my hands in two days . Thanks No problem! Glad it fit properly. Major pain in the you know what when you're dealing with making a part for guns that apparently have a giant range of acceptable tolerance.... Link to comment Share on other sites More sharing options...
ngodwetrust21 Posted December 23, 2016 Share Posted December 23, 2016 Ordered! I will send pics when I get it installed. Just seemed like a fun idea to try out. I have two of the stock 2s. Why not..... Link to comment Share on other sites More sharing options...
johnbu Posted December 25, 2016 Share Posted December 25, 2016 (edited) Worked some "magic", added special "Christmas snowflakes" and have a CO legal Stock 2 with primary machine adaptor, vortex viper dot, henning's grips and pads. Thanks to PrimaryBruce for making the adaptors that made it happen. Edited December 25, 2016 by johnbu Link to comment Share on other sites More sharing options...
johnbu Posted December 25, 2016 Share Posted December 25, 2016 Oh, the factory rear sight weight is 1.0 oz. I did zero the scale with the empty bag , so the sight only weight is shown. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted December 25, 2016 Share Posted December 25, 2016 (edited) How much do the grip screws weigh? The recoil spring? Myabe you guys can run a plastic sear and sear housing to shave weight. What about dremeling off the hard chrome? Let us know how much lighter that makes the gun, if you don't mind. Edited December 25, 2016 by MemphisMechanic Link to comment Share on other sites More sharing options...
johnbu Posted December 25, 2016 Share Posted December 25, 2016 Nope! Being just under 45oz was the goal. Lol. But hollowing out the gun and adding helium .... Oops! that tip was classified top secret and stored on Hillary's server. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted December 25, 2016 Share Posted December 25, 2016 10 minutes ago, johnbu said: ...That tip was classified top secret and stored on Hillary's server. So... the Russians will be fielding a fleet of them at World Shoot? Link to comment Share on other sites More sharing options...
PrimaryBruce Posted December 25, 2016 Share Posted December 25, 2016 25 minutes ago, johnbu said: Oh, the factory rear sight weight is 1.0 oz. I did zero the scale with the empty bag , so the sight only weight is shown. No problem! Link to comment Share on other sites More sharing options...
johnbu Posted December 25, 2016 Share Posted December 25, 2016 Oh primary Bruce, i like it so much i ordered another adaptor and a buddy is having one dropped to my place for him too! You guys made some nice stuff! Thanks again. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted December 29, 2016 Share Posted December 29, 2016 On 12/25/2016 at 5:09 PM, johnbu said: Oh primary Bruce, i like it so much i ordered another adaptor and a buddy is having one dropped to my place for him too! You guys made some nice stuff! Thanks again. Thank you sir! We truly appreciate the kind words. We have contemplated continuing making them. But making a product that we know has the possibility to not fit for reasons we can't control isn't something we're OK with. Link to comment Share on other sites More sharing options...
johnbu Posted December 30, 2016 Share Posted December 30, 2016 I can understand that! However, it will become more and more popular, especially with us old geezers. Can you intentionally over size by 1-2 thousandth and just have customers fit? The stock tanfo sight was tighter than any I've dealt with. Yours was snug. I may still go back with locktite green, but am ok with it. Depending how i like it, i may just have the slide milled.that should be no problem for you...right? On 12/29/2016 at 8:26 AM, PrimaryBruce said: Thank you sir! We truly appreciate the kind words. We have contemplated continuing making them. But making a product that we know has the possibility to not fit for reasons we can't control isn't something we're OK with. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted January 3, 2017 Share Posted January 3, 2017 On Friday, December 30, 2016 at 8:44 AM, johnbu said: I can understand that! However, it will become more and more popular, especially with us old geezers. Can you intentionally over size by 1-2 thousandth and just have customers fit? The stock tanfo sight was tighter than any I've dealt with. Yours was snug. I may still go back with locktite green, but am ok with it. Depending how i like it, i may just have the slide milled.that should be no problem for you...right? We could oversize them, yes. And thay was something we thought about doing from the get-go, but we THOUGHT we'd be doing everyone a favor by not making them break out the file to fit them in. Turns out we would have been better off. It CAN be milled, however, the way the factory mills these with the LPA dovetail and how deep they go with the FPB recess...it's not ideal. Link to comment Share on other sites More sharing options...
johnbu Posted February 1, 2017 Share Posted February 1, 2017 (edited) A few more pictures on CO stock 2. With henning basepad, but not added capacity (ordered, not here yet). Slide only, no barrel etc. Zerod scale to compare to Optic equipped slide. Difference with optic installed. 0.3 oz. 40 sw barrel 9mm barrel. 1/2 oz heavier than 40sw barrel. Edited February 1, 2017 by johnbu Link to comment Share on other sites More sharing options...
mfs Posted February 9, 2017 Share Posted February 9, 2017 On 7/27/2016 at 10:24 PM, ShortBus said: I'd be down for one of the dovetail mounts for a stockii. I think egw has a mount for lpa Link to comment Share on other sites More sharing options...
SCTaylor Posted February 9, 2017 Share Posted February 9, 2017 I think egw has a mount for lpa Primary Machine probably has some left. I've got one for a rainy day!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ryridesmotox Posted February 15, 2017 Share Posted February 15, 2017 Bump for mfs... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now