CZ TS Orange

[IronicTwitch]

In between, it's the same as a Czechmate, if you can find one of those to fondle.

[goodemachine]

So, here it is May. Are there any Oranges in the US yet?

geo

Never mind; I have figured out the answer...

Edited May 15, 2016 by goodemachine

[IHAVEGAS]

Why would they change to an adjustable sight that you can only adjust for elevation?

Does not seem rational, I must be missing something.

[IHAVEGAS]

Between this not being available and the Shadow 2, CZ is saving me a lot of money .

[adamge]

Ihave, ditto, I have both on order.

[trgt]

Why would they change to an adjustable sight that you can only adjust for elevation?

Does not seem rational, I must be missing something.

When you change between different weight bullets, the POI may be vertically different between them. So adjustable elevation lets you fine to ammo you are using and the distance you want to zero the sights to. The windage doesn't typically change as you play with different ammo, or different distances to zero gun.

Edited June 8, 2016 by trgt

[eerw]

Usually windage adjustment is weak link in sight construction. Makes for a stronger sight.

Edited June 8, 2016 by eerw

[asimonp79]

Hello guys

I have went over the tread- small question

What is the TS orange front sight height ?

Thanks

[MRevolutionIX]

5 hours ago, asimonp79 said:

Hello guys

I have went over the tread- small question

What is the TS orange front sight height ?

Thanks

On my .40s, I measured them to be .150" tall. 

[asimonp79]

The sights on CZ are metric

They go 5.25, 5.5, 6, 6.5mm and so on,

if you say .150" it is 3.81mm-  I am not familiar with this sight 

Edited April 15, 2017 by asimonp79

[IHAVEGAS]

14 hours ago, asimonp79 said:

The sights on CZ are metric

They go 5.25, 5.5, 6, 6.5mm and so on,

if you say .150" it is 3.81mm-  I am not familiar with this sight 

 

CZ measures the full height of the sight, so you have to have one out of the gun to measure it.

 

Common practice with popular sight makers (Dawson Precision for example) is to measure the height of the sight above the slide when installed in the gun. 

 

My guess is that this is what is going on with your numbers. 

 

[MRevolutionIX]

6 hours ago, IHAVEGAS said:

 

CZ measures the full height of the sight, so you have to have one out of the gun to measure it.

 

Common practice with popular sight makers (Dawson Precision for example) is to measure the height of the sight above the slide when installed in the gun. 

 

My guess is that this is what is going on with your numbers. 

 

Yes. The measurement I gave was from the top of the slide to the top of sight. I just measured the entire sight, from the base to the top and it measured at .237".