Loves2Shoot Posted April 29, 2014 Author Share Posted April 29, 2014 Then you should be ok. I think it will hand over just a tad on the DP. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 29, 2014 Author Share Posted April 29, 2014 We added a hole on the Shadow mount so that if you need to pull the extractor, you just need to remove the scope and not the mount. Link to comment Share on other sites More sharing options...
CZ85Combat Posted April 30, 2014 Share Posted April 30, 2014 (edited) this is what CZ customs did for me. Edited April 30, 2014 by CZ85Combat Link to comment Share on other sites More sharing options...
CAGLS Posted April 30, 2014 Share Posted April 30, 2014 (edited) CZ85Combat, I posted the exact pic of your gun as visual example on post #49. Edited April 30, 2014 by CAGLS Link to comment Share on other sites More sharing options...
CZ85Combat Posted April 30, 2014 Share Posted April 30, 2014 (edited) the slide was milled with the mounting post in the slide. They are doing a T/S for me now. Should be done soon. Edited April 30, 2014 by CZ85Combat Link to comment Share on other sites More sharing options...
CAGLS Posted April 30, 2014 Share Posted April 30, 2014 (edited) Hey CZC said they were too busy building new CTS's to mill the slide for a direct mount for me. Edited April 30, 2014 by CAGLS Link to comment Share on other sites More sharing options...
alma Posted April 30, 2014 Share Posted April 30, 2014 Hey CZC said they were too busy building new CTS's to mill the slide for a direct mount for me.Oh no, hope that doesn't severely impact the Accu work on my Shadow that I mailed today. Link to comment Share on other sites More sharing options...
CZ85Combat Posted April 30, 2014 Share Posted April 30, 2014 the slide has been done for a few weeks, they are also doing a grip reduction, comp hammer & refinish Link to comment Share on other sites More sharing options...
Loves2Shoot Posted April 30, 2014 Author Share Posted April 30, 2014 We have the Deltapoint slide mounting milling program set up for the Shadow. Link to comment Share on other sites More sharing options...
CAGLS Posted April 30, 2014 Share Posted April 30, 2014 Then you should be ok. I think it will hand over just a tad on the DP. Can't wait to see how much lower profile you can get it setting it back. Link to comment Share on other sites More sharing options...
IDescribe Posted May 1, 2014 Share Posted May 1, 2014 Shadow mount Right, so we should expect these to pop up on the website in about...??? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 1, 2014 Author Share Posted May 1, 2014 They should be available the end of next week if the anodizer holds their schedule. Link to comment Share on other sites More sharing options...
CAGLS Posted May 3, 2014 Share Posted May 3, 2014 (edited) We have the Deltapoint slide mounting milling program set up for the Shadow. Do you have the slide mounting milling program for the Tactical Sport slide? But first I want to see the setback lower profile mount you were going to make. I think I will just order the P-07 suppressor sights for BUIS. I would want to have dove tail cut to mount the rear sight in front of the Delta point along with the taller front black suppressor sight. Edited May 3, 2014 by CAGLS Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 6, 2014 Author Share Posted May 6, 2014 Yes, we can cut any metal slide that has room to do so. Link to comment Share on other sites More sharing options...
trgt Posted May 6, 2014 Share Posted May 6, 2014 trgt--I hope the mount cut for the 75B will fit the Kadet. I thought they were different. I hope I'm wrong because that means I could use one of the two mounts I have coming on my Kadet instead of the rail I added. Joe, It's entirely possible I'm wrong, I thought when I had a quick look at my 75B before I sold it and the Kadet was that they were the same - I guess I just assumed since it wasn't the shadow cut or LPA TS cut that it must be the 75B cut. I'll try it tonight when I'm back at the house. Edit: Internet search appears that the LPA brand sight on there on only works with Kadet or CZ85. Edit2: looks like from another site, dovetail is the same 75B and Kadet and 85, only issue is that Kadet/85 have rear milled for clearance of the adjustable sight they have, and that sight will work with 75b if you mill the rear rib, so am feeling confident this will work, just need to find my CZC sight tool ... (somehow found all my lost Glock ones so far :-) Follow up to this --- the 75B springer mount as supplied is very close, but not exact for Kadet. Main issue seems to be dovetail of mount is slightly too shallow, and platform slightly too low, so that when unskilled labor (me) trys to install it, the unit cants up slightly rather than going in flat. I'll see if I can send to Scott to triage/custom fit this one, and maybe see if a way to either may future ones work for both, or just do a special Kadet one. (Only reason I attempted is that I saw that folks had done some with shadow sights before, and they just sit high in dovetail. But that won't work here because platform is slightly too close to slide in front) So unless you are much more skilled/smarter than me, please don't try to install this model on a Kadet. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 8, 2014 Author Share Posted May 8, 2014 Shadow Fastfire mounts are in. http://shop.springerprecision.com/product.sc?productId=265&categoryId=42 Link to comment Share on other sites More sharing options...
IDescribe Posted May 11, 2014 Share Posted May 11, 2014 Awesome. Thanks for the heads up. The standard arrived a couple of days ago, and I just ordered the Shadow version. Looking forward to putting them to use. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 20, 2014 Author Share Posted May 20, 2014 For the Kadet, use the Shadow mount, NOT the CZ75 mount. Link to comment Share on other sites More sharing options...
niroth81 Posted May 20, 2014 Share Posted May 20, 2014 Any news about a mount for a CZ75 SP-01 Shadow? This would be perfect for a division hope from production to open, just need to get the comp sorted. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 20, 2014 Author Share Posted May 20, 2014 Any news about a mount for a CZ75 SP-01 Shadow? This would be perfect for a division hope from production to open, just need to get the comp sorted. Look up a few posts http://shop.springerprecision.com/category.sc?categoryId=42 They are available. Link to comment Share on other sites More sharing options...
thompsoncustom Posted May 20, 2014 Share Posted May 20, 2014 I see the poll at the top of the page any plans on building a CZ minor or major comp? If so any design details or dates? Link to comment Share on other sites More sharing options...
CAGLS Posted May 20, 2014 Share Posted May 20, 2014 Is there an adapter being made for the LPA dove tail to mount the Leupould Delta point that the CZ Tactical sports or Shadow target slide have? Link to comment Share on other sites More sharing options...
trgt Posted May 20, 2014 Share Posted May 20, 2014 Is there an adapter being made for the LPA dove tail to mount the Leupould Delta point that the CZ Tactical sports or Shadow target slide have? Two other CZ with LPA cut-> CTS LS custom (TS slide on cz75 frame), and AccuShadow with LPA option. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 21, 2014 Author Share Posted May 21, 2014 I see the poll at the top of the page any plans on building a CZ minor or major comp? If so any design details or dates? There is a PDF on page 1 of a preliminary design. No dates yet. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted May 21, 2014 Author Share Posted May 21, 2014 Is there an adapter being made for the LPA dove tail to mount the Leupould Delta point that the CZ Tactical sports or Shadow target slide have? We will add the DeltaPoint after the FFIII. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now