mcoliver Posted November 30, 2004 Share Posted November 30, 2004 Original Modified Guns thread These are some of the modified gun I pulled out from Andreas (Schwichty_2011): Here are some of what our local guys use: Link to comment Share on other sites More sharing options...
Jon Merricks Posted November 30, 2004 Share Posted November 30, 2004 What kind of frame is that on the last 3 guns? Link to comment Share on other sites More sharing options...
Eye Cutter Posted November 30, 2004 Share Posted November 30, 2004 Para-Ord frames with fabricated and welded on long dust covers Link to comment Share on other sites More sharing options...
davecutts Posted November 30, 2004 Share Posted November 30, 2004 ok i'll bite. Who does that? Link to comment Share on other sites More sharing options...
Eye Cutter Posted November 30, 2004 Share Posted November 30, 2004 local 'smiths here in the Philippines Link to comment Share on other sites More sharing options...
Eye Cutter Posted November 30, 2004 Share Posted November 30, 2004 here are two of my team mates' modified pistols SPS w/ OKO red dot Link to comment Share on other sites More sharing options...
Eye Cutter Posted November 30, 2004 Share Posted November 30, 2004 SVI w/ OKO red dot between the two of them, they've replaced 6-8 OKO red dots already. the OKO cracks at the bottom from brass hitting the plastic and from flexing bec. of the blast shields Link to comment Share on other sites More sharing options...
Eye Cutter Posted November 30, 2004 Share Posted November 30, 2004 Guga Ribas' modified pistol Link to comment Share on other sites More sharing options...
hdgun Posted November 30, 2004 Share Posted November 30, 2004 Very Cool Guns. We don't have a modified div, But I am going to build a modified gun just for the hell of it. I Built one with 38 super and used it for steel matches. But these guns have really peaked my interest. Send more pics,Love to see em. Link to comment Share on other sites More sharing options...
hdgun Posted November 30, 2004 Share Posted November 30, 2004 Does the gun smith in the Philippines have a web site? Does any one have contact info for him. ( for long dust cover on Para ) Link to comment Share on other sites More sharing options...
Flexmoney Posted November 30, 2004 Share Posted November 30, 2004 Does the gun smith in the Philippines have a web site? Does any one have contact info for him. ( for long dust cover on Para ) I think you'd just need to weld on a chunck of metal. It will put you in Open in USPSA though. Link to comment Share on other sites More sharing options...
Eye Cutter Posted January 16, 2005 Share Posted January 16, 2005 Here's hdgun's modified pistol Link to comment Share on other sites More sharing options...
Eye Cutter Posted January 16, 2005 Share Posted January 16, 2005 Link to comment Share on other sites More sharing options...
achard Posted January 16, 2005 Share Posted January 16, 2005 Para-Ord frames with fabricated and welded on long dust covers PM sent Link to comment Share on other sites More sharing options...
uscbigdawg Posted May 20, 2006 Share Posted May 20, 2006 Personally, the Para w/ the JPoint on a mount is hot! I think you could squeeze another .5-1" more in barrel length and maybe another round or two to mag capacity. Hmm.....gotta find an excuse to shoot Modified now. Rich Link to comment Share on other sites More sharing options...
Matt Cheely Posted February 1, 2007 Share Posted February 1, 2007 (edited) Bump to the top. Takes a regular length IPSC Standard mag so you can get 18 in it. There's only about 3/4 of an inch of barrel length taken off. Shoots great and the dot dosen't leave the lens. Not that violent. I actually like shooting it more than the shorty 9mm I had. Kept the recoil system as long as possible and ended up only taking off about 1/4". Cut down a 13lb spring to match. Before was just a taste, here are the good pictures. Edited February 1, 2007 by Matt Cheely Link to comment Share on other sites More sharing options...
jasmap Posted February 1, 2007 Share Posted February 1, 2007 That is frikkin sweet. Link to comment Share on other sites More sharing options...
GMV Posted February 1, 2007 Share Posted February 1, 2007 Bump to the top.Takes a regular length IPSC Standard mag so you can get 18 in it. There's only about 3/4 of an inch of barrel length taken off. Shoots great and the dot dosen't leave the lens. Not that violent. I actually like shooting it more than the shorty 9mm I had. Kept the recoil system as long as possible and ended up only taking off about 1/4". Cut down a 13lb spring to match. Before was just a taste, here are the good pictures. Very nice! Link to comment Share on other sites More sharing options...
Julien Boit Posted February 1, 2007 Share Posted February 1, 2007 Very nice Matt. Very good job, congratulations ! Link to comment Share on other sites More sharing options...
cybrosh Posted February 1, 2007 Share Posted February 1, 2007 Speaking of which....Had the chance to finally make a mount the way I wanted for my modified, using a local machinist/carver/engraver. Gave him the dawson mount, described and showed him exactly what I wanted. The mount was made from stainless steel(whole piece), makes the pistol a bit heavier than usual but it shoots and performs like a dream. Had the chance to practice with it, a day prior to my car accident(haven't shot since...). Since I'm still recovering, will take some time before I head back to the range. Original thread Final results : http://www.cruscomms.com/ipsc/mod/modgr1.jpg http://www.cruscomms.com/ipsc/mod/modgr2.jpg http://www.cruscomms.com/ipsc/mod/modgr3.jpg http://www.cruscomms.com/ipsc/mod/modgr4.jpg http://www.cruscomms.com/ipsc/mod/modgr11.jpg http://www.cruscomms.com/ipsc/mod/modgr6.jpg http://www.cruscomms.com/ipsc/mod/modgr7.jpg http://www.cruscomms.com/ipsc/mod/modgr9.jpg *Wish they could make my car from stainless steel Link to comment Share on other sites More sharing options...
Joe Robinson Posted February 1, 2007 Share Posted February 1, 2007 Matt does that gun fit in the box with the racker on it? Link to comment Share on other sites More sharing options...
Nik Habicht Posted February 1, 2007 Share Posted February 1, 2007 Bump to the top.Takes a regular length IPSC Standard mag so you can get 18 in it. There's only about 3/4 of an inch of barrel length taken off. Shoots great and the dot dosen't leave the lens. Not that violent. I actually like shooting it more than the shorty 9mm I had. Kept the recoil system as long as possible and ended up only taking off about 1/4". Cut down a 13lb spring to match. Before was just a taste, here are the good pictures. You're just torturing Sako now, aren't you? I don't know that I'd ever want to shoot open, but something about Modified just makes me want to..... Link to comment Share on other sites More sharing options...
Matt Cheely Posted February 1, 2007 Share Posted February 1, 2007 Matt does that gun fit in the box with the racker on it? Fits with room to spare. Link to comment Share on other sites More sharing options...
Mike Dame Posted February 1, 2007 Share Posted February 1, 2007 (edited) Nice box the gun looks slick too. You bringing it to DSC? Is it Parkerized? Edited February 1, 2007 by Mike Dame Link to comment Share on other sites More sharing options...
ESTOY Posted March 31, 2008 Share Posted March 31, 2008 (edited) SVI w/ OKO red dot between the two of them, they've replaced 6-8 OKO red dots already. the OKO cracks at the bottom from brass hitting the plastic and from flexing bec. of the blast shields Hi, Who built your modified pistol? Did you see the one that was built by Jojo Vidanes? Its awesome!!!! He built me one still in plating process right now. USPSA dont have modified pistol division, but because the pistol is so handy It is more convenient to use it for open class I might use it in the forthcoming worldshoot xv. By the way, your modified pistol is also nice. Hope to chat with you later. Thanks and respectfully, estoy :cheers: Edited March 31, 2008 by ESTOY Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now