eerw Posted October 31, 2004 Share Posted October 31, 2004 I am always looking for ideas for project guns and what to do...and hate looking through all the threads... so wanted to start a thread to post photos of guns..be they open, limited, production, L-10, 3-gun, Bianchi, steel, revolvers, IDPA...10/22s, varmit, long-range.. Post photos and details on the gun... thanks... I hope this works... Link to comment Share on other sites More sharing options...
eerw Posted October 31, 2004 Author Share Posted October 31, 2004 OK..so here is a start..this was a gun I had a year ago.. Top end built by EGW..cut slide, beretta style cut and rear swoop to lighten..two barrel ports, five-port comp..everything else pretty standard..Allchin mt with C-more, Dawson magwell, EGW hammer, sear, disconnector.. Link to comment Share on other sites More sharing options...
eerw Posted October 31, 2004 Author Share Posted October 31, 2004 anyone else.. Link to comment Share on other sites More sharing options...
mpolans Posted October 31, 2004 Share Posted October 31, 2004 EAA Witness tricked out by World Class Pistols Inc. (George Huening). Link to comment Share on other sites More sharing options...
lionel Posted October 31, 2004 Share Posted October 31, 2004 Hi,here is my toys... http://le-refuge.net/galerie/albums/userpi...166%20copie.jpg http://le-refuge.net/galerie/albums/userpi...ig%20007bis.jpg to be continued...... Link to comment Share on other sites More sharing options...
stingerjg Posted October 31, 2004 Share Posted October 31, 2004 My open gun is a STI frame and slide, Alchin mounted C-more, Schumann 1-32 twist barrel, Brazos Comp, 38SC. My limited gun used to be a Para P14-45, but the barrel has been shot out. Untill the time i can afford to put a new topend on it in .40S&W, im using a Glock 35. KKM match stailess barrel, tungsten guiderod, ghost rocket 3.5 connector, brass magwell, and Tru-glo sights. Link to comment Share on other sites More sharing options...
MoNsTeR Posted October 31, 2004 Share Posted October 31, 2004 eerw, how 'bout a pic of your other open gun? Here's my longslide L10/Limited blaster, courtesy of BrianH... Slide is 13oz w/sights, thinking of having another ounce or so shaved off... Schuemann bushing barrel, thinking of getting a bull barrel... Cominolli SS guide rod, thinking of going plain tungsten... Brazos microdot front, Wilson .125" rear, thinking of going .110"... (chrome by Virgil Tripp, definitely not changing that!) As you can tell, I've got a major "grass is greener on the other side of the fence" problem Link to comment Share on other sites More sharing options...
Dan Burwell Posted October 31, 2004 Share Posted October 31, 2004 Here is my personal work in progress.... Enjoy, Dan Link to comment Share on other sites More sharing options...
shooter_rob Posted December 24, 2004 Share Posted December 24, 2004 This is my primary Limited/Limited 10 gun Built by SAW Custom Guns in Hillsboro GA Hard Chromed by APW Hard to believe it has close to 100K through it Back-up gun is its twin Link to comment Share on other sites More sharing options...
ogiebb Posted December 24, 2004 Share Posted December 24, 2004 here's my main blaster built by Derek of Millenium Custom 2 Link to comment Share on other sites More sharing options...
TMC Posted December 24, 2004 Share Posted December 24, 2004 How about an open P22 Link to comment Share on other sites More sharing options...
Carlos Posted December 25, 2004 Share Posted December 25, 2004 Here goes: a limited blaster for the post-AWB sunset Limited Division: CZ Standard IPSC .40 that comes standard with the factory 1.5 lb trigger (I own 2 of these & have shot 2 others - they are all a reliable & consistent 1.5 lb trigger guns that are very very accurate). Regards, D. Link to comment Share on other sites More sharing options...
super9 Posted January 20, 2005 Share Posted January 20, 2005 http://www.imagehosting.us/imagehosting/showimg.jpg/?id=155603 Here are my two KEAL Custom 9mm Shorty Open guns.... Link to comment Share on other sites More sharing options...
Eye Cutter Posted February 11, 2005 Share Posted February 11, 2005 my old P16-40 with a new top end STI flat top slide w/ extended french cut, barsto bull barrel, aftec extractor, bomar rear sight, DP 0.90 in front Link to comment Share on other sites More sharing options...
Eye Cutter Posted February 11, 2005 Share Posted February 11, 2005 the lowered french cut made it look like a tri-top Link to comment Share on other sites More sharing options...
Eye Cutter Posted February 11, 2005 Share Posted February 11, 2005 Link to comment Share on other sites More sharing options...
Eye Cutter Posted February 11, 2005 Share Posted February 11, 2005 the S&A rosewood grips make the hard chrome stand out! Link to comment Share on other sites More sharing options...
ErikW Posted February 11, 2005 Share Posted February 11, 2005 What's a French cut and does it require special waxing? Link to comment Share on other sites More sharing options...
Eye Cutter Posted February 11, 2005 Share Posted February 11, 2005 hmmm, we gotta ask julien and jerome about that! hahahaha!!!! Link to comment Share on other sites More sharing options...
gmshtr Posted February 11, 2005 Share Posted February 11, 2005 http://www.shootersparadise.com/forums/showthread.php?t=266 http://www.shootersparadise.com/forums/att...attachmentid=89 http://www.shootersparadise.com/forums/att...attachmentid=90 Link to comment Share on other sites More sharing options...
Julien Boit Posted February 11, 2005 Share Posted February 11, 2005 That kind of french cut will only require a milling machine. But you can add wax if you like The french cut is the small line that runs along the sides of the slide, above the cocking serrations, and if I see correctly, there are two on each side. BTW, very nice pistol, congratulations. Phil : I love your blasters, both the open and the standard Link to comment Share on other sites More sharing options...
tightloop Posted February 11, 2005 Share Posted February 11, 2005 Nice...all of them... Link to comment Share on other sites More sharing options...
Trey Posted February 12, 2005 Share Posted February 12, 2005 stingerjg, Where did you get the brass magbases for your G35? Inquiring minds want to know.. Thanks! Link to comment Share on other sites More sharing options...
diehli Posted February 12, 2005 Share Posted February 12, 2005 stingerjg,Where did you get the brass magbases for your G35? Inquiring minds want to know.. Thanks! http://www.brownells.com/aspx/NS/Store/Pro...O+BRASS+MAG+PAD Link to comment Share on other sites More sharing options...
Trey Posted February 12, 2005 Share Posted February 12, 2005 300lb, Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now