sniper3 Posted June 12, 2014 Share Posted June 12, 2014 Rcbs 750 for powder weight. 4 years use without a hitch Link to comment Share on other sites More sharing options...
njl Posted June 14, 2014 Share Posted June 14, 2014 Lyman 1000 XP "digital estimator". It's not accurate at the low end, and not consistent if not recalibrated before each loading session. I use it for quickness and double check on the Dillon Eliminator when it matters. Link to comment Share on other sites More sharing options...
427Cobra Posted June 14, 2014 Share Posted June 14, 2014 I use a cheap MTM electronic scale for quick easy readings when spot checking my 650, for long range rifle loading I use a Prometheus Gen 2, which is a mechanical balance beam\dispencer Link to comment Share on other sites More sharing options...
Albert2 Posted June 27, 2014 Share Posted June 27, 2014 You must find one on amazon or try brecknell BS-180 its a cheap one and also provide you accuracy that you want. Its a medical scale with many features and quality with low price Link to comment Share on other sites More sharing options...
SPDGG Posted June 27, 2014 Share Posted June 27, 2014 (edited) Lee Dippers . . . . . . jk . . . An older RCBS electronic scale . . . . Warm it up, No fan running, no cell phone nearby, no radio . . . . . then its not as finicky, I check it with a beam scale here/there just because I'm up tight about powder weight. Its always been spot on Edited June 27, 2014 by SPDGG Link to comment Share on other sites More sharing options...
moonman16 Posted June 28, 2014 Share Posted June 28, 2014 An RCBS 1500 dispenser/electronic scale verified against a Brian Enos electronic scale AND RCBS CHECK WEIGHTS. Link to comment Share on other sites More sharing options...
mattx Posted June 29, 2014 Share Posted June 29, 2014 I have the gempro 250. It's been stable +/- .02 gr since I got it. Occasionally it will go nuts but taring it brings it right back to normal. Link to comment Share on other sites More sharing options...
sidnal Posted June 29, 2014 Share Posted June 29, 2014 Had my Dillon for 8 years and counting! Link to comment Share on other sites More sharing options...
chalkdust21 Posted July 24, 2014 Share Posted July 24, 2014 My RCBS range master 750 just went out on me after 3+ years. Called them and they said send it back with a check for $50 and they will replace it and renew the 1 year warranty. If it goes out within a year they replace at no cost. Link to comment Share on other sites More sharing options...
razorfish Posted July 25, 2014 Share Posted July 25, 2014 I've been using GemPro 250 for a couple of years. The external power supply went out after a year but was covered by the lifetime warranty. I can't imagine using a scale with anything less than the .02 grain accuracy of the Gempro 250. Link to comment Share on other sites More sharing options...
rdinga Posted August 1, 2014 Share Posted August 1, 2014 (edited) I just ordered one From Brian last night to go with RCBS charge master. Eager to see how the two scales compare side by side. Edited August 3, 2014 by rdinga Link to comment Share on other sites More sharing options...
morpheus Posted August 2, 2014 Share Posted August 2, 2014 Frankford Arsenal digital scale Link to comment Share on other sites More sharing options...
Nugget Posted August 2, 2014 Share Posted August 2, 2014 Another one for the Gem Pro 250. I like to see that extra place to the right of the decimal for charge variance. Link to comment Share on other sites More sharing options...
LCDRJGB Posted August 3, 2014 Share Posted August 3, 2014 RCBS chargemaster. If I shot more I would own and use 2 side by side. Link to comment Share on other sites More sharing options...
Clipper Posted August 3, 2014 Share Posted August 3, 2014 I have more scales than a Carp! Three balance scales, RCBS, Lyman and one so old the name plate is worn off, two Frankford Arsenal digital scales and recently, a Hornady Lock and Load Bench scale (digital). Link to comment Share on other sites More sharing options...
the40calbandit Posted October 11, 2014 Share Posted October 11, 2014 (edited) Has anyone tried the hornady scale? I'm just getting into reloading. I just cant dish out the money right now for the dillon. The Hornady is around $80 Edited October 11, 2014 by the40calbandit Link to comment Share on other sites More sharing options...
njl Posted October 11, 2014 Share Posted October 11, 2014 If money is tight, just get a beam scale. You'll need one anyway to sanity check the (faster but less reliable) digital. Link to comment Share on other sites More sharing options...
the40calbandit Posted October 11, 2014 Share Posted October 11, 2014 Alright, thanks. I'll do that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now